Official Seven Forums Overclock Leader boards

[Solarstarshines]

With tax it comes to $264.99 add $25 for gas and the bridge toll, that comes to $289.99 still cheaper then Newegg or Tiger

Is your tax cheaper then California ?

you might be right but they charge almost 10 dollars per 100.00

 

[AddRAM]

With tax it comes to $264.99 add $25 for gas and the bridge toll, that comes to $289.99 still cheaper then Newegg or Tiger

Have you installed the new cooler yet Brian?

No, not yet. I know, I`m a slacker.

I think I`m gonna wait til I get some different fans.

The tax in PA is $15, the tax in NJ is $8.75 but the drive is way further.

 

[Dude]

With tax it comes to $264.99 add $25 for gas and the bridge toll, that comes to $289.99 still cheaper then Newegg or Tiger

Have you installed the new cooler yet Brian?

No, not yet. I know, I`m a slacker.

I think I`m gonna wait til I get some different fans.

You have way more patience than I do, I would have installed it as soon as it arrived

 

[ICIT2LOL]

A bit OT but take a look at what this bloke is running for a cooling system OCN Water Cooling Club And Picture Gallery (Spawn-Inc)

 

[Solarstarshines]

yeah our sales tax is 9.000% so yeah it was round the price I said plus I bought other stuff that rounded out to 408.11 dollars so yeah it was 260.00 @#$@! taxes are high $ 31.19 in taxes

 

[Solarstarshines]

With tax it comes to $264.99 add $25 for gas and the bridge toll, that comes to $289.99 still cheaper then Newegg or Tiger

Have you installed the new cooler yet Brian?

No, not yet. I know, I`m a slacker.

I think I`m gonna wait til I get some different fans.

The tax in PA is $15, the tax in NJ is $8.75 but the drive is way further.

If i were you I would get driving to Patterson

 

[AddRAM]

No way, the PA store is much closer.

 

[Solarstarshines]

Uhmm 40 min drive wth man get your 3770k

 

[AddRAM]

Naa, gonna get another card, this cpu is just fine.


http://www.newegg.com/Product/Product.aspx?Item=N82E16814130949

 

[essenbe]

AddRam, whay are you doing with all those pictures of Brink on your Desktop?

I'd already have the 3770K installed. I'll have to wait till next week to get mine. Hope it's not a dog like this one.

 

[Solarstarshines]

nice card the 760 is

780's cost as much as a new build damn now that is a monster

 

[AddRAM]

Why are you getting another one ?

I mean, if you think it`s a dog.

And why do you think it`s a dog ?

 

[essenbe]

If that is addressed to me, AddRam, for 2 reasons.
1. My current one is a dog. Requires too much voltage to get over 5. It will do it, but not without a swift kick in the ***.
2. I have 2 Asus V Maximus boards. Right now my second one is running a 2600K, it needs an Ivy Bridge.
OK 3 reasons.
3. Just because I can and don't want Haswell.

 

[AddRAM]

Understood.

 

[Britton30]

Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770K - Newegg.com

Intel Core i7-3770K Processor - Quad Core, 8MB L3 Cache, 3.50GHz (3.90GHz Max Turbo), Socket H2 (LGA1155), 77W, Fan, Unlocked, Retail (BX80667i73770K) at TigerDirect.com


Ahhh, Gary`s car is faster then mine !!! LOL

Living in NJ, I get charged tax by Neweeg

Of course, Kenseth drove for me.

The RAM is listed for Ivy as 1333 and 1600 because that is what the CPU will run ram at default settings even if you install some faster. Sandy and prior is 1333 and 1066. If you look at the SPD tab of CPUz maximum bandwidth it will show whatever the default setting is for the CPU.

The boards' BIOSes read the SPD (Serial Presence Detect) and give the RAM its initial setting so it will boot the first time, then you can use XMP or manual settings.

 

[NoN]

Got those warnings since noon and since i've set Offset Mode - / Cpu Voltage .010 to lower a bit the voltage instead of Cpu Volatge to .005.

Should i care about those warnings and set back to .005?

I'm pretty sure it is related to power consumption.

I did ran also a memtest diagnosis 'cause of a previous BSOD from "NTOSKRNL.EXE", and it found no probs at all.

Answering to myself then...

Got to manage that eventID 19, I had to disable EPU in Bios and turn off the EPU switch on Mobo. It was just that Asus power management add-on that was giving warwing ID 19.

As for BlueScreenOfDeath, all is in order now, fixed drivers issues temporarily!

 

[Dude]

Got those warnings since noon and since i've set Offset Mode - / Cpu Voltage .010 to lower a bit the voltage instead of Cpu Volatge to .005.

Should i care about those warnings and set back to .005?

I'm pretty sure it is related to power consumption.

I did ran also a memtest diagnosis 'cause of a previous BSOD from "NTOSKRNL.EXE", and it found no probs at all.

Answering to myself then...

Got to manage that eventID 19, I had to disable EPU in Bios and turn off the EPU switch on Mobo. It was just that Asus power management add-on that was giving warwing ID 19.

As for BlueScreenOfDeath, all is in order now, fixed drivers issues temporarily!

Glad you got it figured out, sorry we didn't help

 

[kbrady1979]

Sorry NoN......I've been in and out here lately and I wasn't able to help you out. If you have any other problems, please send a PM, because I certainly won't miss that. By the way, what are you up to right now as far as your OC, temps, voltage, etc?

 

[ICIT2LOL]

Came across this last night and thought you OC loonies would be interested LOL!!

Watch from about 14.30 minutes



I thought the temps at the end came up real good

 

[ganjiry]

Came across this last night and thought you OC loonies would be interested LOL!!

Watch from about 14.30 minutes



I thought the temps at the end came up real good

You've got to be brave and willing to lose your cpu when de-liding but it does have good result's if done properly. The biggest temp drop recorded from de-lidding is 30c from what i've read so worth it IF you're really pushing the clock's and willing to kill your cpu if all goes wrong.
There are loads of video's on you tube showing how to do it but most are peeps who don't have a clue what they're doing. I've seen people put a cpu in a bench vice ad use a wooden mallet to knock the blade through the silicone :shock: