Solved Random BSOD's by ntoskrnl.exe

[Nikla]

Hi i'm new to this forum, so bare with me.
Im getting BSOD's very randomly i tried everything that i can think of like update everything to the latest, tested the memory with memtest(no errors were found) ran chkdsk nothing is working and im getting a bit frustrated the dump files are attached to this thread all help would be highly appretiated

 

[x BlueRobot]

[COLOR="red"]BugCheck 1000007E[/COLOR], {ffffffffc0000005, fffff80002cc4281, fffff880031af0a8, fffff880031ae900}

Probably caused by : [COLOR="Red"]memory_corruption[/COLOR] ( nt!MiGetNextNode+15 )

Usual causes:  Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control

memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed.

• http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

Memory:

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run Memtest86+ for least 7-8 passes, and preferrly overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Upload a .NFO file:

Start rb: > Type: msinfo32 > File, Save

Use this tutorial to upload the file:

• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

 

[Nikla]

i ran verifier and restarted windows after windows booted and loaded programs i got a bsod AsIO.sys annd disabled driver verifier after restart.

All msinfo32 is added as in the SF zip.

i will run memtest during the night tonight.

also i would like to add that when i play games like assassins creed and whatsoever i dont get bsod while playing.

thanks for the fast reply

 

[x BlueRobot]

[COLOR="red"]BugCheck C4[/COLOR], {f6, 14c, fffffa8008029950, fffff88004566b03}

*** WARNING: Unable to verify timestamp for AsIO.sys
*** ERROR: Module load completed but symbols could not be loaded for AsIO.sys
Probably caused by : [COLOR="Red"]AsIO.sys[/COLOR] ( AsIO+1b03 )

Remove ASUS:

Start Menu\Programs\ASUS

The driver is related to ASUS, and therefore I recommend you remove any ASUS software from your system:

Start rb: > Computer > Uninstall/Change Program > Select ASUS > Uninstall

• AsIO.sys - Driver Reference Table

 

[Nikla]

ok i ran memtestx86 and no errors. i removed all asus programs and still bsod's happening
im now running sfc /scannow will be back with results

 

[Nikla]

ok sfc is done now its telling me that there are some corrupted files that it wasnt able to fix. also i noticed that most of the time im watching a video on youtube it somehow speeds up thing and get bsods more frequently can it be a video card malfunction?

EDIT: these are the files that sfc cannot fix because the source file is also corrupt
MSOERES.dll
NlsData0416.dll
M1033DSK.CSD

 

[x BlueRobot]

Do you have a Windows 7 Installation DVD?

 

[Nikla]

yes i have one.
i now tried removing one memory module and started the computer then after an hour or so i turned off the pc and changed the slot on the other empty one after 13 minutes i got a bsod saying :
crash dump file: C:\Windows\Minidump\121212-19874-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
Bugcheck code: 0xBE (0xFFFFF8A00978FE30, 0x200000060, 0xFFFFF88008AEC530, 0xE)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This is issued if a driver attempts to write to a read-only memory segment.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
plus i already got about 13 bsods today already

 

[x BlueRobot]

Upload the files and try to do a Repair Install, to repair or replace the corrupted Windows files:

• http://www.sevenforums.com/tutorials/3413-repair-install.html

 

[Nikla]

Here are the files. will start repair now

 

[x BlueRobot]

[COLOR="Red"]BugCheck 3B[/COLOR], {c0000005, fffff80002db29bc, fffff88006f8a1b0, 0}

*** WARNING: Unable to verify timestamp for [COLOR="red"]aswSnx.SYS[/COLOR]
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Uninstall Avast:

Start Menu\Programs\avast! Free Antivirus

More Information - aswSnx.sys - Driver Reference Table

Install Microsoft Security Essentials and Malwarebytes:

• Microsoft Security Essentials | Protect against viruses, spyware, and other malware
• Malwarebytes : Free anti-malware download

:info: Install the free version of Malwarebytes not the free trail; untick the free trail box during installation. Remember to fully update the security definitions for both programs, and perform full scans separately.

 

[Nikla]

im now scanning with malware bytes 3rd time. i was getting a different bsod with page fault in non paged area. now i swapped the ram module to see if that works, crash dumps aren't saving.

 

[x BlueRobot]

Place the RAM modules back into the slots you had them in before you swapped them around, and make sure Windows has been configured to create Mini Kernel Dumps:

• http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

 

[Nikla]

i didnt get a bsod like this and i only have 1 memory module installed can it be the memory slot? im now running mse full system scan. and malware bytes i got one file and deleted that file (kmsEmulator.exe was the file)

 

[x BlueRobot]

Yes, memory slots can be the problem, and good work with running Malwarebytes, malicious files and software can cause BSODs and other errors in some cases.

 

[Nikla]

MSE only found 1 virus Keygen in win32 and its still going

 

[x BlueRobot]

That's good to know, let it complete it's scan

 

[Nikla]

Thanks for all the help. btw if its the memory slot is there a way to fix it? because i cant run with only 2 gb of mem if you know what i mean

 

[x BlueRobot]

How many slots do you have? Different motherboards will support different levels of RAM per slot, use the Crucial memory scanner to see how much memory your motherboard can support:

• Use the Crucial System Scanner software to find out what type of memory is in your computer

 

[Nikla]

i have 2 ddr2 800mhz slots another 2 ddr2 1066mhz slots and another 2 ddr3 1333mhz slots
im using the 2 ddr3 slots and i dont have ddr2 memory plus to buy them they are getting a bit expensive