Randoms BSOD, error 0x000000101

[x BlueRobot]

You've uploaded a Minidump, please upload a Kernel Memory dump, the directory for the file will be different, it should be:

C:\Windows\MEMORY.DMP

 

[goku1234567890]

Any help would be great!!!

 

[x BlueRobot]

A Minidump doesn't contain the sufficient information needed to be able to determine the cause of a Stop 0x101.

Have you configured a Kernel Memory dump to be saved instead of a Minidump? If so, then please upload the dump file from this directory:

C:\Windows\MEMORY.DMP

If you haven't configured a Kernel Memory dump to be saved, then please follow these instructions to do so:

• http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

 

[goku1234567890]

BSOD is caused by ntkrnlpa.exe which is in Windows folder will installing a fresh OS help. Any Help would be appreciated.

 

[x BlueRobot]

No it wouldn't at all, have you checked the above settings in my 23rd post?

 

[goku1234567890]

My windows is already set at kernel memory dump but there aren't any kernel dumps instead there are mini dumps. So what should i do.

 

[goku1234567890]

Guys there are only minidumps no kernel dump please help me!!!

 

[Arc]

Follow the directions outlined in this thread: http://www.sevenforums.com/crash-lo...0x101-clock_watchdog_timeout-troubleshtg.html

 

[x BlueRobot]

Upon the creation of a new BSOD, a Kernel memory dump will be saved if you configured the settings properly.

 

[goku1234567890]

Yeah i did exactly what you told me but there was no kernel memory dump made!!!

 

[x BlueRobot]

Okay, make sure your settings match my screenshot for my system:

View attachment 270899

Please follow the steps in Arc's link.

 

[goku1234567890]

Yeah my setting are exactly the same to yours except i didn't check on automatically restart.

 

[x BlueRobot]

Okay good, what steps have you followed within Arc's link?

 

[goku1234567890]

OK my problem was solved by installing a new fresh copy of windows but there is a problem now there is a new BSOD 0x05 PAGE_FAULT_NONPAGED_AREA. And guess what this one occurring more than the previous BSOD.

 

[x BlueRobot]

Okay, could you please post the new dumps using the same instructions as seen here ~ http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[goku1234567890]

I am really sorry for the late reply. I noticed BSOD was caused by max payne 3. I was installing it and when it was left a tiny bit it BSOD after it I tried to open the folder and BSOD again happened i have deleted the folder but I still want to play the game. Here are the crash dumps if you want.

 

[x BlueRobot]

Sorry for the late reply,

Test the CPU:

• http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

Enable "Round off checking" before the test (see first post below tutorial).

Run some hard-drive diagnostics and follow these steps:

• Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

• SeaTools for DOS | Seagate
• CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

If you have an SSD, make sure the following are up to date:

• SSD firmware
• BIOS Version
• Chipset Drivers
• Hard disk controller drivers/SATA drivers
• If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Check for any file system errors and bad sectors using Option #2 of:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Use this command with Disk Check:

chkdsk C: /f /r