Several BSOD, no singular triggers

[mmurray1988]

Hello everyone.

I built my rig a little under a year ago now (oh how times flies), but I've had multiple BSODs over time. I have worked on correcting them, and have narrowed them down using WhoCrashed, but I cannot seem to find the right updates. There are no specific triggers that set them off. Sometimes I go a couple days without them while running multiple programs at a time, and other times I'll simply be listening to music and it goes crazy. At times I encounter several BSOD in a row before I can even log back onto Windows.

Anyways, I'll attach the Crash Dump Analysis below from Who Crashed. If that's not what I'm supposed to include (newbie) please let me know.

Thanks

View attachment 330505

 

[mmurray1988]

Bump

 

[carwiz]

The .docx files are of no use to the debugger. Please follow the instructions at the top of the page:

http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[mmurray1988]

My bad. Here's what you need.

 

[carwiz]

The errors you're getting are related to memory faults and NTFS file system corruption.

Run Memtest86+ using this tutorial: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
Run the memory test for at least eight passes. If errors occur right away, stop the test and proceed with the individual module tests in the tutorial.

Run Chkdsk /f /r on all drives using this tutorial: http://www.sevenforums.com/tutorials/433-disk-check.html
You must restart the system before the disk scan begins on a system partition. (Drive C: )

Run SFC /scannow using Option Two of this tutorial: http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

 

[mmurray1988]

The errors you're getting are related to memory faults and NTFS file system corruption.

Run Memtest86+ using this tutorial: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
Run the memory test for at least eight passes. If errors occur right away, stop the test and proceed with the individual module tests in the tutorial.

Run Chkdsk /f /r on all drives using this tutorial: http://www.sevenforums.com/tutorials/433-disk-check.html
You must restart the system before the disk scan begins on a system partition. (Drive C: )

Run SFC /scannow using Option Two of this tutorial: http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

I ran all three. I have a screenshot of the results for SFC, and I copied the results of the chkdsk onto note pad. As for memtest I let it run 10 passes but no errors. I don't know how to find the results for memtest. How do I go about sharing the information?

Thanks again.

 

[carwiz]

Memtest results are displayed on the screen. If you didn't get errors, that's good.

Use this tutorial for posting files/images: http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

 

[mmurray1988]

Memtest results are displayed on the screen. If you didn't get errors, that's good.

Use this tutorial for posting files/images: http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

Yes no errors showed up for the memtest

View attachment 331001

View attachment 331002

 

[carwiz]

Download and install the FREE version of Malwarebytes Antimalware (MBAM) from here:
Malwarebytes | Free Anti-Malware Detection & Removal Software
Don't click on the trial or upgrade options. (Make sure they are unchecked.) Let it update then run a full scan.

Download the free Emsisoft Emergency Kit (EEK) from here:
Emsisoft Free Emergency Kit: portable malware scanner | Free removal of Viruses,Bots, Spyware, Keyloggers and Trojans
This is a standalone software kit that doesn't need to be installed. Run the Start.exe and select the EEK Scan only.

Report back with any "hits" from either.

 

[mmurray1988]

download and install the free version of malwarebytes antimalware (mbam) from here:
malwarebytes | free anti-malware detection & removal software
don't click on the trial or upgrade options. (make sure they are unchecked.) let it update then run a full scan.

Download the free emsisoft emergency kit (eek) from here:
emsisoft free emergency kit: Portable malware scanner | free removal of viruses,bots, spyware, keyloggers and trojans
this is a standalone software kit that doesn't need to be installed. Run the start.exe and select the eek scan only.

Report back with any "hits" from either.

View attachment 331010

View attachment 331011

 

[carwiz]

There's nothing there that looks overly suspicious so we'll turn attention back to the drivers you're using.

Follow Option One of this tutorial: http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html
When at least the next two BSODs occur, turn off driver verifier (option two) and upload a fresh run of the DM collector with dumps.

 

[mmurray1988]

there's nothing there that looks overly suspicious so we'll turn attention back to the drivers you're using.

Follow option one of this tutorial: http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html
when at least the next two bsods occur, turn off driver verifier (option two) and upload a fresh run of the dm collector with dumps.

View attachment 331080

 

[carwiz]

netr28x.sys - Wireless Adapter Driver from Ralink Technology, Corp

Loaded symbol image file: netr28x.sys
Image path: netr28x.sys
Image name: netr28x.sys
Timestamp: Fri Feb 22 03:10:29 2013 (51273605)
CheckSum: 0025BC31
ImageSize: 00257000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Ralink merged with MediaTek so the above driver may not be supported any longer. Try the link below and see if your wireless adapter model number is listed. If it is, download and install the driver for your adaptor.

Downloads - MediaTek

 

[mmurray1988]

netr28x.sys - Wireless Adapter Driver from Ralink Technology, Corp

Loaded symbol image file: netr28x.sys
Image path: netr28x.sys
Image name: netr28x.sys
Timestamp: Fri Feb 22 03:10:29 2013 (51273605)
CheckSum: 0025BC31
ImageSize: 00257000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Ralink merged with MediaTek so the above driver may not be supported any longer. Try the link below and see if your wireless adapter model number is listed. If it is, download and install the driver for your adaptor.

Downloads - MediaTek

How do I find out what the model number is of my wireless adapter?

 

[carwiz]

Check to see how it's identified in Device Manager under Network Adaptors.

Click the Start Orb, right click on Computer and select Manage.
In the left pane, expand System Tools and click on Device Manager.
In the right pane will be all your computer devices.

If it doesn't show a model number, right click on the adaptor and select Properties.
In the Properties window, click on the Details Tab.
Under the Property title, click on the down arrow to open the property list.
Click on Hardware Ids then copy and paste the contents under Value in your next message.

 

[mmurray1988]

check to see how it's identified in device manager under network adaptors.

Click the start orb, right click on computer and select manage.
In the left pane, expand system tools and click on device manager.
In the right pane will be all your computer devices.

If it doesn't show a model number, right click on the adaptor and select properties.
In the properties window, click on the details tab.
Under the property title, click on the down arrow to open the property list.
Click on hardware ids then copy and paste the contents under value in your next message.

pci\ven_1814&dev_0601&subsys_28601814&rev_00
pci\ven_1814&dev_0601&subsys_28601814
pci\ven_1814&dev_0601&cc_028000
pci\ven_1814&dev_0601&cc_0280

 

[carwiz]

It's a model RT2860T but I didn't see a driver for it.

Right click on the device in Device Manager and select Update Driver Software.
Click on "Search automatically for updated driver software" and see if Windows can find an update.

 

[mmurray1988]

It's a model RT2860T but I didn't see a driver for it.

Right click on the device in Device Manager and select Update Driver Software.
Click on "Search automatically for updated driver software" and see if Windows can find an update.

It says "windows has determined the driver software for your device is up to date."

What now?

 

[carwiz]

Perform a Clean Start (Boot) using this tutorial: http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html

Uncheck all but the Trend Micro AV.

Run in this mode for a while and see if the BSODs continue.

 

[mmurray1988]

Perform a Clean Start (Boot) using this tutorial: http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html

Uncheck all but the Trend Micro AV.

Run in this mode for a while and see if the BSODs continue.

The only Trend Micro on the list is Trend Micro Solution Platform