sfc /scannow detected corrupt files but unable to fix it... need help

[mackerzz]

as what i red on other threads, they need sfcdetails.txt

can someone give a clean replacement file for the corrupted ones?

i already attach sfcdetails.txt, i really need your help guys!

thanks!

 

[Brink]

Hello Mackerzz, and welcome to Seven Forums.


According to your log, these files below are currupted and could not be fixed.

• C:\Windows\System32\oobe\en-US\W32UIRes.dll.mui
• C:\Windows\System32\spwizimg.dll
• C:\Windows\System32\spwizres.dll
• C:\Windows\System32\spwizres.dll.mui
• C:\Windows\System32\en-US\WABSyncProvider.dll.mui
• C:\Windows\System32\en-US\wavemsp.dll.mui
• C:\Windows\System32\en-US\themeui.dll
• C:\Windows\System32\en-US\w32tm.exe.mui
• C:\Windows\System32\en-US\VSSVC.exe.mui
• C:\Windows\System32\oobe\background.bmp

If you are up for and comfortable with doing a long and hard possible fix, then you could use the tutorial below to extract these files from your retail Windows 7 installation disc to try and replace them in your installed Windows 7.

http://www.sevenforums.com/tutorials/42776-extract-files-windows-7-installation-dvd.html
​

If not, then you should really consider just reinstalling Windows 7.

Either way, I would recommend to backup anything that you do not want to lose to be safe.

Hope this helps,
Shawn

 

[Bare Foot Kid]

Hello mackerzz, welcome to Seven Forums!


Perhaps running the sfc /scan several times from boot will help where a 'regular' scan won't, because the files in question won't be 'in-use' during the process, have a look at this tutorial at the link below and be sure to post back with any further questions you may have and to keep us informed.


SFC /SCANNOW : Run in Command Prompt at Boot

 

[Capt.Jack Sparrow]

as what i red on other threads, they need sfcdetails.txt

can someone give a clean replacement file for the corrupted ones?

i already attach sfcdetails.txt, i really need your help guys!

thanks!

Hello there,

If nothing works the best way is to Repair the OS. Follow this article http://www.sevenforums.com/tutorials/3413-repair-install.html

Hope this helps!

 

[Brink]

Hello mackerzz, welcome to Seven Forums!


Perhaps running the sfc /scan several times from boot will help where a 'regular' scan won't, because the files in question won't be 'in-use' during the process, have a look at this tutorial at the link below and be sure to post back with any further questions you may have and to keep us informed.


SFC /SCANNOW : Run in Command Prompt at Boot

From his log file, SFC has already been ran a few times without being able to repair them.