Show Us Your Rig [3]

[essenbe]

Niklu, nice looking rig. that D14 didn't give the 690 much room did it. On my last rig, my D14 wouldn't let me put my card in the top X16 slot, I had to put it in the second slot. Nice job. Good looking rig.

 

[IownAmoneyPit]

I have buy CM Hyper 101 cpu cooler, and mounted it. Here is picture from my rig inside.

View attachment 218591

Stalker here is that exta fan from my virtual inventory.

Hello I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
View attachment 218627

View attachment 218628

View attachment 218629

View attachment 218630

Cool Rig Niklu yours has cleaner wiring, newer processor, Sabertooth mobo & HAF 932 case + LED's and fancy Nocta cooler to boot.

 

[hatehereyes]

I have finally gotten the 4 Noctua fans I wanted into my case. All for about $45 today

Too bad they don't make fans for power supplies so I can replace that one also.
Sooner or later, I am going to replace the 200mm exhaust fan at the top with possibly 4 92mm or 80mm Noctua fans hopefully.

 

[A Guy]

I have buy CM Hyper 101 cpu cooler, and mounted it. Here is picture from my rig inside.

View attachment 218591

Good one Boshko

Hello I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
View attachment 218627

View attachment 218628

View attachment 218629

View attachment 218630

Welcome to Seven Forums Niklu. Great looking rig

I have finally gotten the 4 Noctua fans I wanted into my case. All for about $45 today

Too bad they don't make fans for power supplies so I can replace that one also.
Sooner or later, I am going to replace the 200mm exhaust fan at the top with possibly 4 92mm or 80mm Noctua fans hopefully.

Noc'd up! Good going

A Guy

 

[jeepmann4x4]

Thanks guys. Although I'm not entirely sure what Bill is up to over there.

I'm definitely going to cut the tubing to length this time. Not sure how I'm going to fit a 140 rad in the case though, that is unless I go for a thin low profile one.

Ok you ready for this....lol

If you do not use your Hotswap bays, Take out the four screws that hold the Power/Sata connectors and remove them (the whole metal piece). Now just move your XSPC pump/res down into the Hotswap bays, Then move dvd/cd drive and Fan controller down two spots each, This leaves your top two 5.25 bays open. Now turn you 360 rad around so that the intake/outtake's are in the 5.25 bays, this should now leave you just enough room to put your 140 rad + one push/pull fan at your rear exhaust (where your rear fan is now) .

 

[ganjiry]

Hello I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
View attachment 218627

View attachment 218628

View attachment 218629

View attachment 218630

lookin good Niklu nce tidy cables make a world of difference enit.
the g19 is a good board enit
nice to see another RAT user what do u think of it? i cant fault mine in any way. really cumfy and tracks really well. my favourite mouse so far

 

[Terronium 12]

Ok you ready for this....lol

If you do not use your Hotswap bays, Take out the four screws that hold the Power/Sata connectors and remove them (the whole metal piece). Now just move your XSPC pump/res down into the Hotswap bays, Then move dvd/cd drive and Fan controller down one spot each, This leaves your top two 5.25 bays open. Now turn you 360 rad around so that the intake/outtake's are in the 5.25 bays, this should now leave you just enough room to put your 140 rad + one push/pull fan at your rear exhaust (where your rear fan is now) .

That's...quite a good idea.

Just so I have this straight it'd be pump/res > Rasa > 360 > 140 > pump/res?

Oh wow another RAT user? I've a 7 that's been tucked away because it stopped working and then started working again...

 

[Alsisgevat]

PLEASE NO, it's res,pump, allways res before pump.

 

[Niklu]

Niklu, nice looking rig. that D14 didn't give the 690 much room did it. On my last rig, my D14 wouldn't let me put my card in the top X16 slot, I had to put it in the second slot. Nice job. Good looking rig.

Hello Essenbe i have my card in top slot, not much space there,but enough

ganjiry Yes i like R.a.t mouse too. i had first r.a.t3 but sidebutton went broken "hard playing" then i bought razer naga and it doesnt fit my hands very well,, so i bought r.a.t 7 and now its good to play battlefield

Terronium 12 I see that 690 is what u have to have

A Guy Thank you for welcoming me in seven forums and thanks all for positive feedback

 

[iMarsa]

 

[Terronium 12]

PLEASE NO, it's res,pump, allways res before pump.

Not when they're combined it doesn't.

And yeah it'd be great to have a 690, or even two...

 

[edwin222]

Lot's of really good looking rigs out since I posted last. My 3 monitor setup hasn't changed on the inside, yet. I'm seriously considering water cooling. But the outside - my Logitech Z906 500W 5.1 Speakers came today. The only thing that will make me happier is when I get the second set in about a month. My first scratch build was dual monitors with 2-500W 4.1 Z something series Logitec speakers. I'm looking for dual speaker mounts to accomodate the second set of satellites that will be added soon. Any suggestions will be welcomed. I'm not against fabricating my own. Again, really nice stuff out there. Glad to see some young blood start posting.

 

[Britton30]

Hello I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
View attachment 218627

View attachment 218628

View attachment 218629

View attachment 218630

Great job cleaning the rats' nest.

I have buy CM Hyper 101 cpu cooler, and mounted it. Here is picture from my rig inside.

View attachment 218591

Nice cooler Boshko. did your temps drop a lot?

I think that's the first laptop here, but if it's your rig, why not?

 

[Tomha]

Got all my parts ordered, really looking forward to setting it up. When I get it all together Ill share you some pics of my updated rig, along with the computer the old parts are being used for, which is really just all the parts from my first custom build which have all slowly been replaced and such, so you'll get to see pictures of my first build too

 

[StalkeR]

Nice cooler Boshko. did your temps drop a lot?

Thanks Britton, and everybody else also. Well yes, temps drop down for 4/5 C. While I'm browsing and all that normal work, I set the fan to 60%, and the temps are then lower for 5C before than.
Sometimes when my bro playes NBA, I set it to 100%.

Temps are pretty good. I don't have money to buy good thermal paste, like MX-4, when I buy good thermal I beleive that the temps will go down for 2-3 C.

 

[friTTe]

Ive seen a lot o cool rigs here, mine atm is a laptop.

Got 2 desktops i took apart and cleaned, rewiring and all...now it wont start at all, green light on motherboard when it got power worked first time but now its dead aswell hehe.

Rig is clean and goodlooking but not working so, will post some pics if i can kick them back to life

 

[essenbe]

Very nice, StalkeR, good job.

and friTTe, looking forward to seeing the pictures.

 

[fsufan0025]

New Rig

Antec 902 Case, Seasonic 520 Gold Modular PS, Asus M4A768LT-M Board, Corsair H60 Water Cooler, AMD 1065 6 Core 2.9 CPU, Corsair XMS DDR3 1333 4X4 Gig Ram , 1 TB Western Digital 7200 Sata HD, 30 Gig Corsair Solid State Catche Drive, LG DVD\RW Sata Drive, LG DVD Sata Rom, Vantec 3.5 Media Card Reader, EVGA TI 550 PCI-E Video Card, Onboard Sound (for now), Samsung 42 in HD Tv Monitor, Samsung 5.1 1000 Watt Home Theater System , Sony Wireless Headphones, Motorolla 3.0 Cable Modem\Gateway. Will post better pics soon !!

 

[essenbe]

Nice looking rig, fsufan0025. Looks like you put a lot of work into it. Looking forward to more pics and see what the inside looks like.

 

[A Guy]

Welcome to Seven Forums fsufan0025.

A Guy