Show Us Your Rig [4]

[Bungee18]

Work in progress

After seeing what Lady Fitzgerald is doing with her case, and what well thought cabling and patience can achieve, I've decided to take it easy this time around.

This is as far as I will go today, plus a shot of the stuff going in tomorrow (new mobo should be in the pic too, but I can't seem to find the box. Maybe it's in the basement den. I certainly hope it is! )

A simple poll: H100 fans pushing air from within the case or pulling fresh air from outside? :huh:

Thanks for bearing with me,

J

 

[essenbe]

When I had an H100, I had better results pushing air into the case. Others have had different results. I think it depends on your case and the airflow within the case. I would suggest trying it both ways and pick the one that's best for your circumstances. That's what I did.

That looks like the makings of a really nice rig. I'm sure you will enjoy it. Good choice of parts.

 

[LittleJay]

It has all the makings for a really nice rig Bungee and I am sure you will enjoy it a lot once everything is up and running.

 

[Lady Fitzgerald]

Looking good, Bungee 18.

 

[Bungee18]

Thank you for you comments Lady and guys.
Will update when I'm done.
Cheers,

J

 

[Dave76]

Nice choice of components, looks great so far.

Post more pics when you can.

 

[ganjiry]

Looking good so far Bungee Good Job
How can you lose the mobo lols. Looking forward to the finished pics

I finally got around to swapping out my psu the other day although i didn't make it as tidy as i'd have liked. I was planning on getting the red pre-braided cables later on but i doubt i will now. I can't really justify or afford the cost of them.
Not much different from before though.

 

[essenbe]

Well done, ganjiry. nice wiring job. You're going to like that new PSU. Mine is great, and quiet too. ganjiry

 

[ganjiry]

Cheers chap.
Yeah it seems ok mate, I didn't think there was any point in getting a higher voltage as i cant see me ever needing more than now. It's nice to be able to get the side panel on without forcing it lol
The voltages on the 3 and 12v are slightly higher than my last psu but the 5v is a tiny tad under(4.975ish) Nothing to worry about though. All good, You can't go wrong with Corsair enit.

 

[Lady Fitzgerald]

Nice job, ganjiry. Don't you just want to shoot the GPU card designers for putting the sockets for the power cables in the most difficult to hide locations?

 

[ganjiry]

Cheers!
Yeah it's a stupid place to put them isn't it Everything right of the connectors though is cooler. The actual PCB ends where the connectors are.

 

[Bungee18]

Very nice rig Ganjiry, and outstanding PSU.
Hope you enjoy it a lot.
Cheers,

J

 

[linnemeyerhere]

Bungee18,
Nice work on the wiring so far. It takes time but is oddly satisfying when it feels and looks right. I attribute it more to a sickness and for this I'm sorry.....lol

ganjiry,
Nice new PSU, the rig is really looking fantastic with lots of bling !

 

[ganjiry]

Cheers Bungee and Alan
I'm looking forward to the rest of the pic's when it's finished Bungee. Looks like it's gonna be a cracking rig.

 

[paulpicks21]

After seeing what Lady Fitzgerald is doing with her case, and what well thought cabling and patience can achieve, I've decided to take it easy this time around.

This is as far as I will go today, plus a shot of the stuff going in tomorrow (new mobo should be in the pic too, but I can't seem to find the box. Maybe it's in the basement den. I certainly hope it is! )

A simple poll: H100 fans pushing air from within the case or pulling fresh air from outside? :huh:

Thanks for bearing with me,

J

Wow, that looks real clean! Great work Bungee and some nice parts there! Look forward to seeing the finished pictures

 

[paulpicks21]

Looking good so far Bungee Good Job
How can you lose the mobo lols. Looking forward to the finished pics

I finally got around to swapping out my psu the other day although i didn't make it as tidy as i'd have liked. I was planning on getting the red pre-braided cables later on but i doubt i will now. I can't really justify or afford the cost of them.
Not much different from before though.

That looks real tidy Ryan, you have an awesome looking rig right there mate

 

[Solarstarshines]

When I had an H100, I had better results pushing air into the case. Others have had different results. I think it depends on your case and the airflow within the case. I would suggest trying it both ways and pick the one that's best for your circumstances. That's what I did.

That looks like the makings of a really nice rig. I'm sure you will enjoy it. Good choice of parts.

Yeah speaking on that subject I have a Element V case My fan placement is 2x 120 mm fans pushing air into the case going over the Hd's 1 x 170 mm fan on top blowing air in not exhuast because the way the fan was made i couldn't turn it the other way

side fan 1x 200 mm exhuast

The water Block I have synth mugen blowing it out and the other fan cooler master led blowing out as well these are my temps under heavy load my Cpu barley goes 38 c but running IBT i got like 53c max

 

[Britton30]

After seeing what Lady Fitzgerald is doing with her case, and what well thought cabling and patience can achieve, I've decided to take it easy this time around.

This is as far as I will go today, plus a shot of the stuff going in tomorrow (new mobo should be in the pic too, but I can't seem to find the box. Maybe it's in the basement den. I certainly hope it is! )

A simple poll: H100 fans pushing air from within the case or pulling fresh air from outside? :huh:

Thanks for bearing with me,

J

Nice job Juan, I've not seen someone wire a case without the board in though, I think it's good ides. Maybe I have been doing wrong all these years.

Looking good so far Bungee Good Job
How can you lose the mobo lols. Looking forward to the finished pics

I finally got around to swapping out my psu the other day although i didn't make it as tidy as i'd have liked. I was planning on getting the red pre-braided cables later on but i doubt i will now. I can't really justify or afford the cost of them.
Not much different from before though.

Ryan, he lost the mobo BOX.
Nice job on swapping a PSU and keeping cables so neat!

 

[Northernsoul55]

After seeing what Lady Fitzgerald is doing with her case, and what well thought cabling and patience can achieve, I've decided to take it easy this time around.

This is as far as I will go today, plus a shot of the stuff going in tomorrow (new mobo should be in the pic too, but I can't seem to find the box. Maybe it's in the basement den. I certainly hope it is! )

A simple poll: H100 fans pushing air from within the case or pulling fresh air from outside? :huh:

Thanks for bearing with me,

J

Built a gaming tower for my son, he plays CS:GO on steam, I got him the FX Vision Black edition processor, if thats same processor your in for a Treat he loves it, Have fun!

 

[ganjiry]

Cheers folks!
I was planning on getting the Corsair braided cables later on but they're just that bit to pricey to justify
I think i'm sick of cabling for a good while though.

The water Block I have synth mugen blowing it out and the other fan cooler master led blowing out as well these are my temps under heavy load my Cpu barley goes 38 c but running IBT i got like 53c max

Great temps there chap.

Ryan, he lost the mobo BOX.
Nice job on swapping a PSU and keeping cables so neat!

I thought the mobo was in the box