Show us your SSD performance 2

[chrysalis]

Hello everyone
This is my first ssd. Installed last weekend and did clean install. My Inspiron 1520 have only sata 3 so will not run on full speed but still better then my old hdd. Here are the results, I hope they are in good range

compared to my 830 your threaded looks outstanding however I am curious as my guess is that you have that on a sata3G based on the sequential speeds so how your threaded reads got faster than the stata port speed.

 

[essenbe]

To check trim open an elevated command prompt and thter this command fsutil behavior query disabledeletenotify
It will return - DisableDeleteNotify = 1 (Windows TRIM commands are disabled) or
DisableDeleteNotify = 0 (Windows TRIM commands are enabled)

The only issue is that will tell you if the Operating system is sending trim commands to the sata controller, it won't tell you if the controller is using those commands. We know the Intel controllers do, but there is a lot of speculation of whether the Marvel controllers do. I guess, time will tell.

 

[Hopalong X]

So I want to use marvell but the crunch point is if trim will work on it. Also slightly annoyed that I will have to have my graphics card pcie at 8x instead of 16x as well, but if I am right my geforce 460GT should still run at full speed with that spec.

Use the Samsung SSD Magician toolbox and run TRIM when you want.

I clean all my temp files every few days and run the TRIM command through Magician every 7-14 days.

Can be found here under Manual and Downloads> software tab> Magician software (v3.1)> http://www.samsung.com/us/support/owners/product/MZ-7PC128D/AM

 

[chrysalis]

ok so manual trim will work even if the controller doesnt pass on the auto trim thats good to know, thanks.

 

[Hopalong X]

ok so manual trim will work even if the controller doesnt pass on the auto trim thats good to know, thanks.

Yup.

Of course the Samsung Magician only works on Samsungs.

The same is true of the Intel toolbox. You need to match the proper toolbox to the Intel model SSD.

 

[paulpicks21]

Hi Guys, so I received my 128GB Vertex 4 in the post today.
Just finished setting it up with a clean install so I figured you would like to see how it runs in the regular benchmarks.

 

[Hopalong X]

Hi Guys, so I received my 128GB Vertex 4 in the post today.
Just finished setting it up with a clean install so I figured you would like to see how it runs in the regular benchmarks.

Those numbers look terrible.

Terribly good. :devil:

RMA it back it works too good.

 

[A Guy]

Hi Guys, so I received my 128GB Vertex 4 in the post today.
Just finished setting it up with a clean install so I figured you would like to see how it runs in the regular benchmarks.

Great numbers Paul. A Guy

 

[essenbe]

Nice scores, Paul. Those are good numbers. well done.

 

[Britton30]

Fantastic Paul!
I think I need to get mine on msahci instead of iaStor?
I didn't run this, just info.

 

[whs]

Paul's nums are great. I wonder though why the 4K read is relatively slow. After all this is what the system uses most.

I just checked the nums of my 64GB M4 - the 4K read is over 17K

 

[Hopalong X]

Paul's nums are great. I wonder though why the 4K read is relatively slow. After all this is what the system uses most.

I just checked the nums of my 64GB M4 - the 4K read is over 17K

Paul's ATTO is showing 4K read at 86,000. ????

 

[chrysalis]

I think samsung are throttling threaded on the 830s probably to stop people buying them for server use occasionally I see threaded benchmarks shoot up very high then drop right down.

Although at the same time my threaded's are lower than what other 830 owners get.

Also I tested my graphcis card on some stuff with pcie8x and it barely only loses 1fps so when I move windows it will probably be onto my marvell using msahci and I will manually run trim once a week or so.

 

[whs]

Paul's nums are great. I wonder though why the 4K read is relatively slow. After all this is what the system uses most.

I just checked the nums of my 64GB M4 - the 4K read is over 17K

Paul's ATTO is showing 4K read at 86,000. ????

Right, sorry I misread. I read it as 8,600.

 

[Hopalong X]

whs

I thought you might have misread it. No problem.

 

[paulpicks21]

Thanks for the comments on the drive, it's a real speed demon for sure!

Just finished installing all my windows updates and putting all my favourite software back on now, clean installs can be a real pain in the butt!

The overall score has gone up a little now also

 

[mjf]

This is a TRIM tool for Crucial SSDs (+ others?). It needs to be run as Administrator.
SSD Tool
It didn't seem to do anything noticeable for me.

 

[Britton30]

This is a TRIM tool for Crucial SSDs (+ others?). It needs to be run as Administrator.
SSD Tool
It didn't seem to do anything noticeable for me.

I have used it too and I only saw s slight increase in ASSSD but no different than letting TRIM run as it wishes, this tool just invokes it at your command.

 

[Fking]

 

[chrysalis]

I did notice marvell had much lowr cpu usage which itself is a performance boost, sadly tho once the OS hit my drive I had sever lockup issues waiting for i/o of the ssd so now its on my intel. I will post later when browsing on the rig again with the score I now get with OS installed on it. It gets 7.8 on WIE.