Show Us Your WEI

[KMoore4318]

Here's mine. I'm not quite sure why Disk Data Transfer Rate seems a little low and whether there is anything I can do to increase its performance?

With a treditional HD, 5.9 is about the best you can expect, even ir raid 0 you probably wont see more than 6.2 with the expensive HD's, but SSD is a diferent story, two ( the right two) in raid 0 can peg 7.9.

As stated in the proceeding post, SSD is solid state drive,

My score with With 2 ssd's ( Intel X25-M ) ssd's in raid 0 and 2 EVGA 295's

My score with 2 Segate 1TB 7200 RPM drives Raid 0 and a EVGA 260

SSD HD tune Bench

If you have unlimited funds and want Max speed check out

[nomedia="http://www.youtube.com/watch?v=96dWOEa4Djs"]http://www.youtube.com/watch?v=96dWOEa4Djs[/"]YouTube- Broadcast Yourself.[/nomedia]

 

[Mr Smiley]

Thanks Bare Foot Kid & KMoore4318 for the info and for the very entertaining YouTube video!

 

[Mudmover]

Hello Mudmover, welcome to Seven Forums!


Try this.

View attachment 34805


Post back to keep us informed.

Unfortunately, "resetting" WEI link simply takes me back to the screen saying the computer hasn't yet been rated and I'm back to square one, where clicking on "Rate This Computer" does nothing!

Everything else seems to be working OK, so I'm not going to mess anymore - with an i5 and SSD boot drive I know my machine is plenty quick enough for me!

 

[KMoore4318]

Ok I got ready to Order a keyboard today and tried to enter Bios before I did and it worked, two days ago nothing would get me in today no problem.

But thanks anyway

 

[bloke]

Ok I got ready to Order a keyboard today and tried to enter Bios before I did and it worked, two days ago nothing would get me in today no problem.

But thanks anyway

no probs anywayz. happy to try n help.

ok? so it was a faulty k/b? still, can you go through the bios to see if you have that usb k/b support setting?

 

[skillian]

heres my score (attached)
phenom 955
8gig ddr2 1066mhz
2x250 RE3 WD RAID 0 primary
2x250 RE3 WD RAID 0
3x 1TB HDD
8800GTX
Toshiba 37x 1080p lcdtv
i've also attached an hdtune result
the primary raid 0 has drop by about 50mb /sec max read since installed win7 64 pro (came from win7 rc 7100)
everything is installed same as when using the RC.

 

[KMoore4318]

In Bios under Intergrated pheriples, there is a section called USB support, under there I had:
USB 1.0: Enabled
USB 2.0: Enabled
Op Mode: High Speed
KeyBoard Function: Enabled
Mouse Function: Enabled
Storage Function: Enabled.

 

[bloke]

In Bios under Intergrated pheriples, there is a section called USB support, under there I had:
USB 1.0: Enabled
USB 2.0: Enabled
Op Mode: High Speed
KeyBoard Function: Enabled
Mouse Function: Enabled
Storage Function: Enabled.

so it was already enabled? well im stumped.

 

[4left]

Posting from work, mine is 4.1 due to P4 3.0 processor. But, considering I am upgrading from XP on a 6 year old system I am pleasantly please with the results. Once I remove XP I assume the overall performance will improve.

 

[najaboy]

Given an i7 975 overclocked to 4 GHz, the cpu subscore was somewhat surprising. The rest is detailed in my system specs.

 

[sparkyuiop]

My Homebuilt Baby

Being let down on hard disks although my system still runs 7 like it's Win 95!

 

[Bare Foot Kid]

Hello sparkyuiop, welcome to Seven Forums!

 

[bloke]

Given an i7 975 overclocked to 4 GHz, the cpu subscore was somewhat surprising. The rest is detailed in my system specs.

are you using beta 7100 build or 7600? cos that score seems a bit low for your cpu.

 

[Gornot]

Processor: 5.7 (Intel E7500)
Memory (RAM): 5.5 (2GB DDR2)
Graphics/Gaming Graphics: 6.7 (nVidia GeForce 9800GT)
Primary Hard Disk: 5.9 (Western Digital 320GB)

Overall, 5.5 because of the RAM. For the money invested in this PC, I am quite satisfied with it's performance, since I'm not a hard-core gamer or anything, the efficiency of Windows 7 on this machine is perfect

 

[najaboy]

Given an i7 975 overclocked to 4 GHz, the cpu subscore was somewhat surprising. The rest is detailed in my system specs.

are you using beta 7100 build or 7600? cos that score seems a bit low for your cpu.

7600. The score is a bit perplexing to me, although I haven't given it too much consideration other than rerunning the assessment at stock and again overclocked with no change. Windows only reports running at stock, but cpu-z shows the overclock.

 

[InternetLord]

Given an i7 975 overclocked to 4 GHz, the cpu subscore was somewhat surprising. The rest is detailed in my system specs.

are you using beta 7100 build or 7600? cos that score seems a bit low for your cpu.

7600. The score is a bit perplexing to me, although I haven't given it too much consideration other than rerunning the assessment at stock and again overclocked with no change. Windows only reports running at stock, but cpu-z shows the overclock.

i think balmer(toupee and all) is sleeping with the head of intel. for windows will claim everytime that it is not tweaked / oc'd. while you can see / feel the difference. they both have quite a lot to gain by trying to con you.

 

[KMoore4318]

Windows is only going to score your base oc not your Turbo, so if your at 21X200,( with turbo on) it will be a 4.0 not a 4.2, a 4.0 on any I-7 is going to give you about a 7.6, a 4.3 about a 7.7.

 

[Bare Foot Kid]

Hello Sopolias Falst, welcome to Seven Forums!

 

[InternetLord]

Windows is only going to score your base oc not your Turbo, so if your at 21X200,( with turbo on) it will be a 4.0 not a 4.2, a 4.0 on any I-7 is going to give you about a 7.6, a 4.3 about a 7.7.

actually regardless of how you setup you oc in your bios windows will still say you are at the stock speed of your cpu. i have setup my e8400 to run at 3.6 versus the stock 3.0 3 different ways to test which gives me better performance / stability. i have benchmarked the system at stock speed and under each of the oc profiles and according to all the test and what i could actually see myself the system does perform faster under anyone of the oc profiles than at stock, however when i go to sys info using any one of the oc profiles windows tells me that i am only running at 3.0. at one time windows would have told me what my actual clock speed was. hence my previous post.

 

[bloke]

just like this, it will not show nor tell me my current overclock?