Solved Stop 0x00000124

[lubyx]

hello, i have this blue screen very often usully every time when i run youtube videos, its very anoying, its like 4 times in 10 min, sometimes i have no prob for day or two but mostly everytime i go for youtube video it happens, i tried clean instal witout any updates, no games but didnt help, i cant figure out this prob for last 2 years so please if u can help i will very apprecite that
i attached dumpfile for u

 

[GeneO]

Run some memory diagnostics on your computer to see if you have some failing memory. memtest86+

 

[lubyx]

i did overnight,it was running for 6 hours, no errors

 

[HonorGamer]

Make sure you follow the http://www.sevenforums.com/crash-lockup-debug-how/221485-bsod-analysis-getting-started.html so we can get all crash files. Just one dump file is hard to figure the problem out with out the other files.

This is what I am able to get from it:

Showing hardware problems, so please do the following:

BugCheck 0x124

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html and use the following hardware checks to supplement that link.

• If you are overclocking any hardware, please stop.
  
  
• If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
  
  
• Run all but the advanced tests with SeaTools for HDDs.
  SeaTools for Windows
  
  SeaTools for DOS​
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.​
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

​

Coutesy of: writhziden

ctac32k.sys Wed Jul 2 03:38:22 [B][COLOR="Red"]2008 [/COLOR][/B](486B3E7E)

Drivers before 2009 are known to cause problems. Please update: Creative Worldwide Support

[B][COLOR="red"]dtsoftbus01.sys[/COLOR][/B] Fri Jan 13 07:45:46 2012 (4F10358A)

Although this driver is very well up to date. It is associate with Daemon Tools. which are also known to cause problems. Please completely uninstall Daemon Tools.

nvlddmkm.sys Sat Oct 15 01:07:55 [B][COLOR="red"]2011 [/COLOR][/B](4E99233B)

These are your graphics drivers. Yes they are well up to date, but i know there are newer versions. So to be safe update: Drivers - Download NVIDIA Drivers

Post back results.

-Justin

 

[lubyx]

dont have daemon tools instaled right now, graphic driver is the latest, maybe two weeks old, and the creative driver is the latest available for xfi on creative page for win7 64bit, maybe there is something newer for sound not from creative i have to take a look...
dont have the warranty, its old pc, i build it few years ago by myself..

 

[HonorGamer]

If you no longer have a warranty, then go ahead and run the tests. This will help us out a lot on singling out the problem.

-Justin

 

[lubyx]

i took off second pair of rams week ago and no blue screen since that time.... there were two pairs but not exactly the same, both kingstone both 2x2gb ddr3 but i am not sure about timing if it was the same...

 

[GeneO]

i took off second pair of rams week ago and no blue screen since that time.... there were two pairs but not exactly the same, both kingstone both 2x2gb ddr3 but i am not sure about timing if it was the same...

Glad to hear you worked it out.

 

[HonorGamer]

Were they the same bus speed each? But yes, I am glad we did figure it out. Lame that you had bad RAM though. But problem solved.

-Justin

 

[lubyx]

They are both 1333 mhz i think but i have to double heck, the other thi ng is when they were both in sometimes i didnt boot, just peep sound came out from Mb, so i had to reset again. I think it might be coused by bad compatibility between them. I have to try the other pair to test if they are good, so that would be a problem of compatibility

 

[HonorGamer]

How many other sticks do you have? If you have 2 other, try putting those 2 into the slots where the bad 2 were in.

-Justin