System unstable unable to provide BSOD files

X

xager8on

New member
Local time
2:20 AM
Messages
4
I installed Windows 7 32 bit Home version with no issues about a month ago. Recently I have been getting dumps which was associated with a bad driver for network. Resolved that about a day ago. Then things went terribly wrong. Today Windows needs to repair the disk. That failed. Tried to go to a System restore point. That failed. Tried to reload Windows 7 with a custom install and it fails. Gives me error code 0x80070570 and 0x80070241. Now I cant install Windows.


I have also been getting "A problem has been detected and Windows has been shut down to prevent damage to your computer" with the following errors:
Cache_Manager
Memory_Management
Bad_Pool_Header
Process1_Initialization_Failed


It has also completed Chkdsk a number of times.


The system is completely unstable and reboots continuously even after I try to repair it. I have been successful in providing the necessary files. I have also posted this on Crucial site since I cant get Windows to reload.


Need help.


System:
CPU: Core i3-2100 3.1GHz 65W LGA 1155
Motherboard: ASRock P67 Extreme4 LGA 1155 Intel P67 chipset ATX
Memory: G.SKILL F3-12800CL8D-4GBXM Ripjaws-X DDR3-1600 CL8 2 x 2GB Kit
Graphics Card (NVIDIA): SPARKLE SXT440512D5NM GeForce GT 440 GDDR5 512MB
HDD (boot): Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB
HDD (data): Western Digital Caviar Green WD20EARS 2TB
DVD: LITE-ON 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM 8MB Cache SATA
 

My Computer My Computer

At a glance

windows 7
OS
windows 7
Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY
Code: 
[font=lucida console]
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:46:34.189 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:09.422
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:36:04.674 2011 (UTC - 4:00)
System Uptime: 0 days 0:09:33.533
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  taskhost.exe
FAILURE_BUCKET_ID:  0x1a_41790_nt!MiDeleteVirtualAddresses+390
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:04:33.535 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:07.768
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 09:35:19.236 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:10.094
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 08:35:17.534 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:08.767
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sat May  7 20:15:27.620 2011 (UTC - 4:00)
System Uptime: 1 days 2:19:48.478
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
PROCESS_NAME:  System
BUGCHECK_STR:  0x24
FAILURE_BUCKET_ID:  0x24_Ntfs+8eabf
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Fri May  6 03:17:37.440 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:18.673
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
PROCESS_NAME:  AVGIDSAgent.ex
BUGCHECK_STR:  0x24
FAILURE_BUCKET_ID:  0x24_Ntfs+ca6b
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 18:09:51.135 2011 (UTC - 4:00)
System Uptime: 0 days 0:41:09.368
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 10:40:32.225 2011 (UTC - 4:00)
System Uptime: 0 days 4:23:25.084
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 04:16:43.517 2011 (UTC - 4:00)
System Uptime: 0 days 6:08:54.750
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed May  4 07:03:55.055 2011 (UTC - 4:00)
System Uptime: 0 days 9:05:39.288
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Tue May  3 19:05:09.940 2011 (UTC - 4:00)
System Uptime: 0 days 0:49:09.173
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Tue May  3 07:28:39.959 2011 (UTC - 4:00)
System Uptime: 0 days 1:16:54.818
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Mon May  2 23:39:36.755 2011 (UTC - 4:00)
System Uptime: 0 days 3:19:39.613
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Mon May  2 06:36:05.052 2011 (UTC - 4:00)
System Uptime: 0 days 8:30:54.911
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 19:54:14.782 2011 (UTC - 4:00)
System Uptime: 0 days 3:46:40.016
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 14:44:57.366 2011 (UTC - 4:00)
System Uptime: 0 days 5:18:09.599
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 06:37:25.807 2011 (UTC - 4:00)
System Uptime: 0 days 7:33:25.425
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sat Apr 30 09:57:06.360 2011 (UTC - 4:00)
System Uptime: 0 days 1:04:10.593
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Fri Apr 29 07:01:31.891 2011 (UTC - 4:00)
System Uptime: 0 days 0:48:55.124
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 28 20:37:36.364 2011 (UTC - 4:00)
System Uptime: 0 days 0:48:40.223
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 28 07:03:53.361 2011 (UTC - 4:00)
System Uptime: 0 days 0:47:24.594
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed Apr 27 23:58:09.556 2011 (UTC - 4:00)
System Uptime: 0 days 3:21:55.415
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
[/font]
 

My Computer My Computer

At a glance

Windows 7 Home Premium 64bitIntel Core i5-2500 @ 3.8GHzG.SKILL Ripjaws Series 8GB (2 x 4GB) DDR3 1600NVIDIA GTX 550Ti
Computer Manufacturer/Model Number
Self Built
OS
Windows 7 Home Premium 64bit
CPU
Intel Core i5-2500 @ 3.8GHz
Motherboard
MSI P67A-GD65
Memory
G.SKILL Ripjaws Series 8GB (2 x 4GB) DDR3 1600
Graphics Card(s)
NVIDIA GTX 550Ti
Sound Card
On Board
Monitor(s) Displays
ASUS 23"
Hard Drives
OCZ Vertex 3 VTX3-25SAT3-60G
Keyboard
Wireless
Mouse
Wireless
MemTest results

It appears that a RAM stick has gone bad. I greatly appreciate the assistance. I havent tried the other tests yet. Finally reinstalling Windows.
 

My Computer My Computer

At a glance

windows 7
OS
windows 7
You must log in or register to reply here.

Similar threads

BSOD - Custom Build Unstable - Unable to identify solution
Replies
3
Views
2K
Arc
Arc
system unstable with BSOD f4 after moving system to new HD
Replies
4
Views
3K
Dsprague
Dsprague
Back
Top