The driver \Driver\WUDFRd failed to load for the device... error

[BobCrabtree]

Worked for me, too!

Many thanks

Cheers

Bob C

 

[galgu]

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

 

[RichardTheGreat]

Fixed same error on 8.1 Pro (HP Envy 17ts). Services showed Manual. Changed to Automatic. I know this is Seven Forums, but it was the first item in Google search results; and the only simple fix. Many thanks!

 

[HandsomeP]

Changing the Windows Driver Foundation service to Automatic resolved the Event Viewer warning for me as well.

 

[techdude88]

[FONT=&quot]Changing the Windows Driver Foundation - User-mode Driver Framework Service from Manual to Automatic did NOT solve the Warning message problem in Event Viewer after startup for me. [/FONT][FONT=&quot]

My particular problem appears to be caused by the device driver related to a Biometric Fingerprint scanner device that is integrated into the laptops keyboard/palm rest area on the right hand side.

[/FONT][FONT=&quot]The existing device driver detailed information was AuthenTec version 1.6.2.352 (dated 2/27/2013). Although there appears to be a newer (date anyways) device driver version from Lenovo 5.9.9.7282 (dated 2013-04-21), if you look carefully at the driver Readme.txt file you’ll see that the actual version of the WBF device driver is exactly the same version (i.e., 1.6.2.352). I also verified that the Lenovo driver is the same exact version of the driver by installing the software.

[/FONT][FONT=&quot]If you go into the Device Manager, select the driver and select Properties, the General Tab indicates ‘This device is working properly.’ Not sure why Event Viewer displays the warning message.

[/FONT][FONT=&quot]If you don’t use this particular device, you can Disable the device in the BIOS settings. In the BIOS, go to Security: I/O Port Access: Fingerprint Reader and change the setting from Enabled to Disabled. That “fixed” the warning message showing up in the Event Viewer after restarting the system.[/FONT][FONT=&quot]

Just going to have to live with it I guess.[/FONT][FONT=&quot]

[/FONT][FONT=&quot]By the way, I did try uninstalling all of the USB controller devices in the Device Manager and re-installing the devices to make sure that I had a clean USB controller setup to see if that would correct the problem, but unfortunately it did NOT.

[/FONT][FONT=&quot]=======================================================[/FONT][FONT=&quot]
For reference, the exact warning message I was seeing in the Event Viewer was:[/FONT] Warning message:
The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&253484d9&0&3.

And the message just before the above Warning message:

The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again.
[FONT=&quot]
[/FONT]I did notice that both of these messages showed up VERY early in the startup process, (i.e., only 4 seconds after the OS is counting the number of CPUs and two seconds after the wired Ethernet link has been established messages are logged). My guess is that something related to this device is not being done in exactly the correct order to prevent the Warning message from occurring.

 

[coperfell4]

Before we look at the more complex solutions, we should some of the simpler ones. This fixed the issue for me so you might also want to try it.

1: Reinstall USB Controllers

Hold the Windows Key and Press X. Choose Device Manager from the context menu. Expand USB Controllers, and right click on each one of it to uninstall them. Once done, reboot your PC and then test to see if the Event Viewer still logs error 219. If it still does, then attempt the next method.

2: Failing power supply

If along with the error-id your system is experiencing shutdowns and reboots as well, then you will have to get your power supply checked, if it can’t hold the load it may trigger this error and this usually indicates a failing power supply.

3: Some other driver may be incompatiable

Visit the manufacturer’s site for your system and download the latest drivers from their site. Such as your Sound Drivers, Chipset Drivers, Graphic’s Drivers etc.. Once all of them are downloaded, installed and updated (reboot again) and test.

4: Run Windows Updates

Click start and type windows updates. Click on it, and run the updates. Apply/Install any updates it finds. Once done, reboot PC and test.

You can have a look at other solutions through the reference links that I've mentioned below. Hope it helps. Cheers!

Reference Links:

1. http://www.tomshardware.com/answers/id-3086112/driver-driver-wudfrd-failed-load-device-root-wpd-0000-event-viewer-info.html

2. https://validedge.com/driver-wudfrd-failed-load/

3. https://social.technet.microsoft.com/Forums/windows/en-US/781f9597-c1e5-481c-b435-33a125516cc0/warning-kernelpnp-driverwudfrd-failed-to-load-for-the-device-wirelesskeyboardfilter?forum=w7itprogeneral