pjb2
New member
HP EliteOne 800 G2 non-touch
Win 7 Pro SP1
Raid 1, Primary 1tb, Secondary 1tb
Followed HP Support Assistant to update Intel USB 3.0 eXensible Host Controller Driver.
Windows popup said driver was installed.
HP Install tool said update FAILED
Reboot and I am unable to use mouse or keyboard to navigate to User Login (can't select or click on icon to get option to enter password). Mouse and Keyboard are dead at all 6 usb ports. Tested a HUB, 3.0/2.0 with 7 ports, all failed. Tested HUB at each of 6 usb ports, all combinations failed.
Booted from Win 7 SP1 factory disk. chose option to repair. Selected 'Startup', proceeded to message saying no errors in Startup. Exit 'Repair'; continues to boot normally and end up at same login screen with no mouse/keyboard function .
Press power off for 10 sec to power down. Unplug source power, then restore source power. load CDROM with factory disk. Press power button, system starts, select boot from DVD, launches the 'install/repair' session, loads Windows files, select option to 'repair'. Message says 'recovery options are not compatible with operating system' (worked before to check 'startup' for errors). Exit to continue launching Windows, ends up with disabled mouse/keyboard.
Tried same process with Safe Mode, ends up with login icon and no functionality to select/click on icon to enter password.
Consulted HP Support by phone, no solutions, recommended re-imaging Windows 7 (clean install) and then use Recovery disk to get back to last save (Sept 25).
Launched Win 7 install, shows Drives as 0 system, 1 windows, 2 recovery, 3 backup, 4 cdrom. All options have a message 'Windows cannot be installed on this drive'. Exit install session, system resumes attempting to open Windows, end up at login with dead mouse/keyboard.
Power down, unplug power, restart, use ESC to access HP start-up menu. Examine BIOS options, do not see 'Enable Legacy USB', did see that 'Legacy Boot' option was enabled. Don't know what other BIOS to check.
Is the solution a PS2 adapter to connect mouse and keyboard? This system only has USB ports.
Overall, I can't use mouse or keyboard to login and can't seem to add/remove/update drivers. Don't know what other options might solve this glitch. Thanks for any assistance. Hoping to avoid a clean install of Win 7.
-pjb2
Win 7 Pro SP1
Raid 1, Primary 1tb, Secondary 1tb
Followed HP Support Assistant to update Intel USB 3.0 eXensible Host Controller Driver.
Windows popup said driver was installed.
HP Install tool said update FAILED
Reboot and I am unable to use mouse or keyboard to navigate to User Login (can't select or click on icon to get option to enter password). Mouse and Keyboard are dead at all 6 usb ports. Tested a HUB, 3.0/2.0 with 7 ports, all failed. Tested HUB at each of 6 usb ports, all combinations failed.
Booted from Win 7 SP1 factory disk. chose option to repair. Selected 'Startup', proceeded to message saying no errors in Startup. Exit 'Repair'; continues to boot normally and end up at same login screen with no mouse/keyboard function .
Press power off for 10 sec to power down. Unplug source power, then restore source power. load CDROM with factory disk. Press power button, system starts, select boot from DVD, launches the 'install/repair' session, loads Windows files, select option to 'repair'. Message says 'recovery options are not compatible with operating system' (worked before to check 'startup' for errors). Exit to continue launching Windows, ends up with disabled mouse/keyboard.
Tried same process with Safe Mode, ends up with login icon and no functionality to select/click on icon to enter password.
Consulted HP Support by phone, no solutions, recommended re-imaging Windows 7 (clean install) and then use Recovery disk to get back to last save (Sept 25).
Launched Win 7 install, shows Drives as 0 system, 1 windows, 2 recovery, 3 backup, 4 cdrom. All options have a message 'Windows cannot be installed on this drive'. Exit install session, system resumes attempting to open Windows, end up at login with dead mouse/keyboard.
Power down, unplug power, restart, use ESC to access HP start-up menu. Examine BIOS options, do not see 'Enable Legacy USB', did see that 'Legacy Boot' option was enabled. Don't know what other BIOS to check.
Is the solution a PS2 adapter to connect mouse and keyboard? This system only has USB ports.
Overall, I can't use mouse or keyboard to login and can't seem to add/remove/update drivers. Don't know what other options might solve this glitch. Thanks for any assistance. Hoping to avoid a clean install of Win 7.
-pjb2
My Computer
At a glance
Windows 7 Pro SP1 x64; Virtual Machine XP ModeIntel i7-6700 CPU @ 3.40 GHz32 GBdon't know
- Computer type
- PC/Desktop
- Computer Manufacturer/Model Number
- HP EliteOne 800G2 23-in Non-Touch
- OS
- Windows 7 Pro SP1 x64; Virtual Machine XP Mode
- CPU
- Intel i7-6700 CPU @ 3.40 GHz
- Motherboard
- don' know
- Memory
- 32 GB
- Graphics Card(s)
- don't know
- Hard Drives
- Raid 1; two 1T HDD (one is backup)
C: Windows; user files
D: HP_Recovery
E: HP_Tools
Virtual Machine Disk 1, created at install
Virtual Machine Disk 2, added VHD from previously failed XP Mode on this same machine
F: CD ROM
H: External, MyPass
- Antivirus
- Norton Security
- Browser
- IE
