Usb code 10

[Layback Bear]

Just a thought.

What are your cpu temps under load with your over clock?
What are your vCore volts under load with your over clock?

 

[Driver170]

Hi with HW monitor MAX temp was 62. Vcore about 1.36

 

[Layback Bear]

What kind of a load where those reading taken?

 

[torchwood]

wireless

Hi,
Your wireless WILL have the advanced tab, and a lot of them have
Gaming mode enable/dissable.

Post a screenshot if not.

Roy

 

[Driver170]

Well i increased my CPU voltage from 1.12 to 1.13 seemed to
Do the trick

 

[Layback Bear]

From post #62

Vcore about 1.36

From post #65

Well i increased my CPU voltage from 1.12 to 1.13 seemed to
Do the trick

If you would answer my questions completely, I might be able to help you.

Your cpu volts are what at what load or are the readings at idle.

 

[Driver170]

That was at full load. I use Nick N guide hes a guru best at OC haswell ever. Can't beat this guy.

Haswell: 4.8GHz on Air.. Building A Haswell System - SimForums.com Discussion

 

[Layback Bear]

Okay. Watch your vcore and temps. At a 4.8 over clock your vcore (cpu volt) might have to be bumped up just a little.
The rule of the thumb is keep you vcore as low as you can without a BSOD and everything working properly; and yet keeping the temps under control.

 

[Driver170]

His guide goes up to 4.8 GHZ but i'm only clocked at 40 thats good enough for me!

 

[Driver170]

So can a wrong cpu volt cause USB instability? I think going to 1.13 has sorted it out will keep testing though for a few days to make sure!

 

[Layback Bear]

What ever website you use to over clock one should remember that all of them are just guide lines.
No two cpu's and or motherboard react the same way to the same settings. The cpu and motherboard can be the same as others and still not use the same setting.
It's a process of trial and error until one finds what their system likes.

I spent many hours and days finding the sweat spot on my last system (My System Specs). Someone with the exact same system most likely would not be able to use the same settings.

That is the joy of over clocking. Figuring out your systems settings.

 

[Driver170]

Ok i used ASUS optimal OC and i'm getting the CODE 10 again on my same device

 

[Driver170]

Forgot to mention i get a code 10 with BIOS at Default

 

[Layback Bear]

So we don't have to go back to Octobers post and read all the post could you tell us exactly what you were doing when you got a code 10.

Did you get a pop up or what? Could you post a picture of your code 10 so we can take a look?

Take a read what Microsoft states about code 10.

https://support.microsoft.com/en-us/kb/943104

Did you get a BSOD?

 

[Driver170]

I returned my BIOS back to default and restarted my PC and my headset was showing a code 10 error

No pop ups no BSOD.

 

[Driver170]

usb code 10

 

[Layback Bear]

Okay I'm confused and over my head.
Your JetMax 737 throttle simulator has a code and your head set doesn't work.
Could you explain things a little better, MAYBE I will understand.
What does your throttle simulator and your head phone have to do with each other?

 

[Driver170]

Hi sorry these are the two devices that give me the USB CODE 10. But not both at the same time, just one will give the error at a time.

 

[Layback Bear]

Are both plugged into the computer at the same time? How are they plugged in?

 

[Driver170]

I have them plugged into my USB powered hub, i have also tryed it directly to my PC