Visiontek ATI Radeon HD 3650 AGP Standard VGA?

[torrentg]

If device manager says "standard vga", then you aren't running 191.07. Install by using the device manager itself. Right click standard vga, update driver software, browse, let me pick, have disk, browse, now find the .inf that the driver download .exe extracted.

 

[Mashed1316]

No no, the device manager recognize it as a 8400gs but when i try to change the resolution and refresh rate.. it shows as "Generic non-PnP monitor in standard vga card" and if i go into devices and printers theres one that says "non specified" and "standard vga card" is on there! i even have the nvidia manager on the control panel, i really don't know what to do

Any ideas?

 

[torrentg]

Post a screenshot of your device manager showing display adapters and also showing the result when you double click the card and go to driver tab.

 

[Mashed1316]

i hope you understand a little spanish hehe!

well thats it.. i dont know if there's a problem with my video card or with my chipset on the mobo! P4M900 + VIA 8237A... i dont know.. i thought it could be that INF thing you explained before.. who knows?

 

[torrentg]

Is your PC working well and you have Aero? If so, I don't see any problems anywhere.

 

[Mashed1316]

the weird thing is this, i removed the video card, and tested it with the integrated graphics card, via igp something weird.. installed the drivers, and NO problems! so that's why im thinking is the video card.. everything worked fine with the integrated, PnP monitor on IGP blah blah.. with the 8400gs (even though i "have" the drivers installed) doesnt recognize it i don't know why....

 

[Mashed1316]

oh and the other thing.. the video card shows itself as a USB device!! i can even remove it safely! let me upload it

There u go.. look at the right bottom of the screen.. it says i can safely remove VGA card, this doesn't happen with the integrated card, and it should NOT be happening on a regular basis i tell you, im extremely lost here and i dont know what to do

 

[torrentg]

Go into bios, disable the integrated video. Reboot to Windows 7. Use PC. Set it and forget it. Enjoy PC.

 

[Mashed1316]

it is disabled.. the bios is just fine.. i think the problem is in the video card what do you think it could be?

 

[torrentg]

Wouldn't worry about it. Leave it be fa cheezy and just don't get sleezy.

Enjoy the PC.

 

[Mashed1316]

Ok i will.. but take a look at this! i went to device manager, looked around the driver on the 8400gs and something looks odd here.. what do you think?

Apparently the nvdisp.nvu is "unknown" at all.. and all the other files says "NVIDIA CORPORATION" i'll expect your opinion tomorrow, it's 3am here and im way too sleepy

 

[torrentg]

My opinion, unless you report back of crashes or problems in usability, is to stop looking for problems and relax about it.

Use the machine as intended. For fun.

 

[Mashed1316]

ok.. now i discovered something new and it will let you know that there's something wrong with the video card or windows or something..

I've always been using auslogics boostspeed, and looking it up i found this... Under WinXP and WinVista it says "Video Memory: 512,00 MB", under Win7, Nothing

Check out the Startup Registry Entries; under WinXP or WinVista there's always 2 entries from Nvidia, check under windows 7.. there's nothing!

PD: I can't play a single game i installed today Ghost Recon Advanced Warfighter I (im not a big gamer) and it doesn't even let me load the game! (Apparently not enough video memory)

PD2: I still don't know how the f*** a have aero running but this is for sure weird and i still can't find a solution for it!

PD3: The game IS ok, i've installed it on WinXP and WinVista and playing it in a medium/high settings without problems

Hopefully you will find a solution, or at least guide me into one!

Thanks!

 

[Rommm001]

same issue can you please send me the file as well?

hey guys i have the same issue: Have all specs to upgrade to windows 7 but not the specific driver for the HD3650agp. can you please tell me wat to do after i upgraded....

thanx in advance!!!
greetz
Jerome.

 

[thefabe]

Welcome to seven forums Rommm001. I think if you'll read through this entire thread the answer is already their. No since going over existing information. Post #9 and #11 IMO. fabe

 

[darksabaton]

could use help if possible heh. i have powercolor HD 3650 AGP card with win7 64 bit. powercolor nubs are lazy and dont post 64 bit OS drivers at all :/

10.1 hotfix gets my drivers to display as visiontek 2600 XT or somethin like that. name isnt a problem for me but getting blue screens alot.

now 10.2 is out maby it works... but it wouldnt override w7 automatic gfx drivers -_-

seen it might be needed...

files are C7_95693 and CH_95693, seen 3650 agp listed, but it sure aint installin um. just says w7 drivers are better...

thx for any help

 

[fuzzymaiden]

rehost this link please

Here's the .inf for ATI HD 4650 AGP, for Catalyst 9.9. RapidShare: 1-CLICK Web hosting - Easy Filehosting Please confirm it works well and enjoy!

TorrentG, dont know if your still hanging around here.. I want to know if you can rehost this link. I too have an ATI HD 4650 AGP and could really use this file. Plus I dont know exactly how to install it. Would I just locate this file on my own after selecting "update driver" using the browse option?:huh:

Thanks ahead for any advice you can give me.
-Fuzzy-