Weird freezes , restarts and some BSODs

[omonoia91]

hello, my pc after all tests and etc used to work just fine.but today when i started it , i got a freeze and i restarted it.after restart i got a screen were all the devices were there and there were some options like load default ,enter boot menu,enter setup mode ,etc.i tried to press f11 and go to boot menu but the pc was frozen and i couldnt select an option.then i closed it again from the button and now when i start it nothing happens.i hear the sound of machine but the pc doesnt start.

edit:after several tries i finally started pc by going somewhere where it was saying boot device and i selected my hard disk and pc succesfully started

 

[writhziden]

Sounds like something hardware related was interfering with your motherboard POST. If you have the problem again, try resetting the hardware/software connections with the BIOS.

1. Shut down and turn off the computer.
2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
3. "Remove the computer from any port replicator or docking station, disconnect
   cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
   power from components is drained to clear the software connections between the BIOS
   and hardware and clear any corruption in the temporary memory.
5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
   and mouse should suffice and be the only peripherals reconnected.
6. Turn it on to reinitialize the software connections between the BIOS and hardware

You could also do a hardware stripdown to determine which hardware is interfering:

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. :warn:WARNING: The steps that follow can void your warranty!!!

Strip down your system to run only the bare essentials: one RAM module, the CPU, motherboard, one hard disk, one graphics card (or use onboard graphics if you have it), keyboard, mouse, and one monitor. See if the system starts. If it starts, add one piece of hardware back at a time until you have problems again. Take notes of what hardware you add and how the system responds to the hardware changes.

As you add and remove hardware, follow these steps for ESD safety:

1. Shut down and turn off your computer.
2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.

Once these steps have been followed, it is safe to remove and replace components within your computer.


What were the results of the hard disk tests? Especially SeaTools?