win 7 on installing ,sata and ide disk partition

[neverall]

I want to install win 7 professional x64,i have a Dvd iso...Problem i want to solve is next,i have 1 sata disk ,and 1 ide disk...I want to divide Sata on two partition,c and d,and to install system on c..Next,my Ide disk ,has jumper on cable select,i think it could be the only way that is to pc work properly.Problem is ,when i install win 7 on partition c,next happens ,on My Computer,disk drives are not shown as Sataartitions c: and d: but its mixed somewhat,if i recall,itc c: of sata,and d is given t ide disk... i really want to know is there a solution to have primary sata c: and d: ,and than ide disk..thx!


Computer

Processor
Model : AMD Athlon(tm) 64 X2 Dual Core Processor 4600+
Speed : 2.57GHz
Cores per Processor : 2 Unit(s)
Threads per Core : 1 Unit(s)
Type : Dual-Core
Integrated Data Cache : 2x 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line size
L2 Cache : 2x 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size

Computer
Mainboard : Asus M2N
BIOS : AMI 0902 02/16/2009
Bus(es) : ISA X-Bus PCI PCIe IMB USB i2c/SMBus
Multi-Processor (MP) Support : No
Multi-Processor Advanced PIC (APIC) : Yes
Total Memory : 4GB DIMM DDR2

Chipset
Model : AMD Athlon 64 / Opteron HT Hub
Front Side Bus Speed : 2x 1GHz (2.14GHz)
Total Memory : 4GB DIMM DDR2
Channels : 2
Memory Bus Speed : 2x 428MHz (856MHz)


Video System
Video Adapter : NVIDIA GeForce 8800 GTS (96 SM4.0 1.1GHz, 320MB DDR3 1.58GHz 320-bit, PCIe 1.00 x16)



Storage Devices
WDC WD800BB-22JHC0 80GB (ATA100, 2MB Cache) : 75GB
WDC WD6400AAKS-22A7B0 (640.1GB, SATA300, 3.5", 7200rpm, 16MB Cache)
TSSTcorp CDDVDW SH-S223F (SATA150, DVD+-RW, CD-RW, 2MB Cache) : 3GB

 

[Bare Foot Kid]

Hello mate.



If I understand what you want, why don't you disconnect the data cable of the PATA/IDE Hard Disk Drive, then you could install Windows 7 to C: and after the install create and format the second partition on the SATA HDD, then power down and reconnect the IDE HDD back, that should solve the issue?


Step Two of this tutorial at the first link below has a lot of useful information on using Windows diskpart to create and format partitions before starting the installation process.


SSD / HDD : Optimize for Windows Reinstallation

DISKPART : At PC Startup

 

[theog]

Also when you reconnect the IDE Hd, make sure your Sata HD is the first HD to boot in BIOS.