Windows 7 32-Bit Service Pack 1 Installation Error...

[Ghostafec]

Wonder if you guys can help with an installation of SP1 for Windows 7 32-Bit. I have attached the cbs.log containing the error information however all the fixes suggested around the net (disable AV, selected startup, install in safe mode etc) don't work and the service pack still fails to install.

I am not sure what it is I am looking for in the log but if someone can help me out by pointing me in the right direction I would greatly appreciate it.

Cheers!

 

[zigzag3143]

Wonder if you guys can help with an installation of SP1 for Windows 7 32-Bit. I have attached the cbs.log containing the error information however all the fixes suggested around the net (disable AV, selected startup, install in safe mode etc) don't work and the service pack still fails to install.

I am not sure what it is I am looking for in the log but if someone can help me out by pointing me in the right direction I would greatly appreciate it.

Cheers!

There are known issues with SP-1. Some requiring re-installation of certain previous updates. Google it.

what is the error codes you get (if any)?

 

[Ghostafec]

I have googled it and every case has suggested different things, I have tried them all.

The error code is 800F0826

 

[NoN]

Look here, last page 5, post # 43:

Troubleshooting Windows 7 SP1 install:
http://www.sevenforums.com/windows-...89-list-available-hotfixes-windows-7-a-5.html

 

[Ghostafec]

Cheers but having read through them all none of them apply to this issue.

It's a bit pathetic in 2011 that they can't even roll out an update without creating a cryptic error that could potentially be caused by anything, even their own help system for the error tells you absolutely nothing.

 

[NoN]

have you tried to download the package x86.exe as stand-alone then run it again?
Download details: Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)

Looks the previous one was corrupted.

 

[Ghostafec]

Yeah man just literally finished doing that now, gets to 2% on configuring the service pack and then fails and says reverting changes, attached the screenshot of the error. Getting frustrating now as I have spent a good few hours on this, I'm just going round in circles now.

 

[Ghostafec]

2011-02-22 23:07:51, Info CBS Startup: Package: Server-Help-Package.ClientUltimate~31bf3856ad364e35~x86~~6.1.7601.17514 completed startup processing, new state: Staged, original: Staged, targeted: Staged. hr = 0x800f0826
2011-02-22 23:07:51, Info CBS Startup: Package: Windows7SP1-KB976933~31bf3856ad364e35~x86~~6.1.1.17514 completed startup processing, new state: Staged, original: Staged, targeted: Installed. hr = 0x800f0826
2011-02-22 23:07:51, Info CBS Setting ExecuteState key to: ExecuteStateNone
2011-02-22 23:07:51, Info CBS Setting RollbackFailed flag to 0
2011-02-22 23:07:51, Info CBS Clearing HangDetect value
2011-02-22 23:07:51, Info CBS Saved last global progress. Current: 0, Limit: 1, ExecuteState: ExecuteStateNone
2011-02-22 23:07:51, Info CBS Startup: Retrying failed packages.
2011-02-22 23:07:51, Info CBS Startup: received notification that startup processing completed, allowing user to logon
2011-02-22 23:07:51, Info CBS Startup: Processing complete. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-02-22 23:07:51, Info CBS Restored system sleep block state: 0x80000000
2011-02-22 23:07:51, Info CBS Enabling LKG boot option
2011-02-22 23:07:51, Info CBS Startup processing completed. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-02-22 23:07:51, Info CBS Failed during startup processing, continuing with Trusted Installer execution [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-02-22 23:07:51, Info CBS Startup processing thread terminated normally
2011-02-22 23:07:55, Info CBS SPI: SPReview.exe started
2011-02-22 23:07:55, Error CBS SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SPReview. er=0x2
2011-02-22 23:07:55, Info CBS SPI: SQM is not opted in
2011-02-22 23:07:55, Error CBS SPI: (SPIRegQueryDWORDValue:413)Failed to query registry value: UploadDisableFlag er=0x2
2011-02-22 23:07:55, Info CBS SPI: Determining Version and Wave Values in SpInstall: Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17514
2011-02-22 23:07:55, Info CBS SPI: Build number 6.1.1.17514
2011-02-22 23:07:55, Info CBS Session: 30135013_1454029652 initialized by client SP Coordinater Engine.
2011-02-22 23:07:55, Info CBS SPI: Reviewing Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17514. State: -19 Error: 0x800f0826
2011-02-22 23:07:55, Info CBS CBS session is NULL, nothing to finalize
2011-02-22 23:07:55, Info CBS SPI: SP installation failed. hr: 0x800f0826

-------------------------------------

That's the last bit of the log where it falls over.

 

[NoN]

I wonder how is set DEP (Data Execution Prevention) in your system parameters and if you have MSE aswell. In that case set DEP lowest to Windows services and programs only (reboot) and disable MSE the time to install SP1.

 

[Ghostafec]

Thanks for the reply. From what I can see DEP is already selected for Services and Programs only.

I was on live support with a Microsoft represnetitive for over 3 hours last night and after exhausting all of the fixes around the net he elevated my support call for call back from someone else higher up tomorrow. To be honest I have little faith in actually resolving this without a clean install. I have tried registry fixes, uninstalling drivers, safe mode booting, using driver cleaning software, uninstalling specific updates, changing specific services to start automatically, tried everything. I think because it bombs out so early on in the configuration of the Service Pack that there are fundemental files that are either missing or corrupt and these are files that the Windows Repair/Check Disk and SFC are failing to pickup on.

I am left with the unfortunate possiblity of having to reinstall Windows

 

[NoN]

Thanks for the reply. From what I can see DEP is already selected for Services and Programs only.

I was on live support with a Microsoft represnetitive for over 3 hours last night and after exhausting all of the fixes around the net he elevated my support call for call back from someone else higher up tomorrow. To be honest I have little faith in actually resolving this without a clean install. I have tried registry fixes, uninstalling drivers, safe mode booting, using driver cleaning software, uninstalling specific updates, changing specific services to start automatically, tried everything. I think because it bombs out so early on in the configuration of the Service Pack that there are fundemental files that are either missing or corrupt and these are files that the Windows Repair/Check Disk and SFC are failing to pickup on.

I am left with the unfortunate possiblity of having to reinstall Windows

Humm...well backup your stuff, be prepared to factory restore.

I'm sure you won't be missatisfied after a clean install & SP1 install.

PS:
maybe some news here (thanks to Bill2):
http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/46459255-8749-457c-a55f-b5057e41161a

and here (thanks to Airbot):
http://forum.phyxion.net/viewtopic.php?id=17

 

[Ghostafec]

Thanks for the help guys. A fresh install sorted it. When looking at the CBS.log there were way too many errors for files missing and because I am on a raid, when I tried to reapir it wanted the Raid drivers confirming but for some reason it wouldn't accept the ones I use to install it so I decided to gut it and start again. Know this won't help anyone out but I couldn't be bothered pratting about with it anymore.

 

[rfmn482]

Have had two failed attempts to install the SP1 update. Both times I get the error message E_FAIL (0X80004005). This error occurs after the install and on the subsequent re-boot. When the computer has nearly re-booted this message appears "Failure converting Service Pack. Reverting Changes.". The re-boot hangs for nearly half an hour before showing my desktop with the error message shown above.

I must have spent three hours on this today and don't know what to next.

Any help gratefully accepted

 

[Gucci Two Times]

Have had two failed attempts to install the SP1 update. Both times I get the error message E_FAIL (0X80004005). This error occurs after the install and on the subsequent re-boot. When the computer has nearly re-booted this message appears "Failure converting Service Pack. Reverting Changes.". The re-boot hangs for nearly half an hour before showing my desktop with the error message shown above.

I must have spent three hours on this today and don't know what to next.

Any help gratefully accepted

same boat as you my friend.

 

[NoN]

Have had two failed attempts to install the SP1 update. Both times I get the error message E_FAIL (0X80004005). This error occurs after the install and on the subsequent re-boot. When the computer has nearly re-booted this message appears "Failure converting Service Pack. Reverting Changes.". The re-boot hangs for nearly half an hour before showing my desktop with the error message shown above.

I must have spent three hours on this today and don't know what to next.

Any help gratefully accepted

same boat as you my friend.

Welcome to SevenForums,

You might want to go in this section of the forums to get more results:
Windows Updates & Activation - Windows 7 Forums

 

[fasty23]

service pack 1

i have read your writen. i have same problem. my os is win 7 ultimate 32bit and i cant install sevice pack 1
windows error is: insufficient system resources exist to coplete the the requested service.
please guide me

 

[rfmn482]

I had the same error message and spent at least six hours trying to resolve the problem to no avail. in the end I did a 'repair' install of Windows and this solved the problem and most importantly left all my programs and settings etc., intact. SP1 installed without a hitch. Hope this helps

 

[Gary1951]

I went the repair install route after much frustration. What has been changed from RC to RTM version of SP? I had no problems with either the beta or RC. Can only assume that something terminal happens when you delete SP RC to install RTM version.