Windows 7 - Dell Touchpad - Synaptics

[ace2525]

Hi All,

I just installed Windows 7 Build 7600 and I am trying to get the touchpad scrolling to work on my Dell Inspiron 1420. I installed the synaptics drivers from their website (v10.1.8 x64) but when I go to mouse properties and click the synaptics tab it only allows me to configure the right and left click buttons. How can I configure the scrolling of my touchpad? I NEED it!

Also are there any iTunes guru's out there? I have my library all setup on my vista partition. Is there anyway I can get my library/playlists on the Windows 7 side...I don't want 2 copies of my music, I want it to all link to the files on the vista partition but I have a feeling I will have trouble either getting the playlists in or trying to gain access to those files on that partition....

thanks for all your help!

 

[zigzag3143]

Hi All,

I just installed Windows 7 Build 7600 and I am trying to get the touchpad scrolling to work on my Dell Inspiron 1420. I installed the synaptics drivers from their website (v10.1.8 x64) but when I go to mouse properties and click the synaptics tab it only allows me to configure the right and left click buttons. How can I configure the scrolling of my touchpad? I NEED it!

Also are there any iTunes guru's out there? I have my library all setup on my vista partition. Is there anyway I can get my library/playlists on the Windows 7 side...I don't want 2 copies of my music, I want it to all link to the files on the vista partition but I have a feeling I will have trouble either getting the playlists in or trying to gain access to those files on that partition....

thanks for all your help!

Ace

We could tell you more if you filled in your system specs in the lower left corner of your post, but Im assuming you dont have this tab. Im running a dell as well but IM using an older driver that was installed by win 7, and it works

In terms of Itunes I also dual boot and keep the music files on one partition (win 7) but as long as you point itunes to where they are stored, it should be a problem. the problem comes when you want to sync the updates (adds/deletes) on both partitions.


Ken

 

[Muad Dib]

Win7 - 64 bit or 32-bit?

When you say you downloaded the Synaptice drivers from their website do you mean the Synaptics website od Dell's?

Did Dell not have a Vista driver that would work?

 

[ace2525]

Ken, see I don't have all those tabs, only the 'device settings' tab shows up in regards to synaptics

I got my iTunes set-up, thanks!

& I'm running Windows 7 x64. I can't use the Dell drivers, they say there not compatible, that is why I tried generic synaptics and like I said, just one tab shows and only lets me configure left & right click.... any help?

 

[TGSoldier]

Maybe zig can link you with the drivers he uses and hopefully that will work.

 

[zigzag3143]

Ken, see I don't have all those tabs, only the 'device settings' tab shows up in regards to synaptics

I got my iTunes set-up, thanks!

& I'm running Windows 7 x64. I can't use the Dell drivers, they say there not compatible, that is why I tried generic synaptics and like I said, just one tab shows and only lets me configure left & right click.... any help?

Ace

Mine is 32 bit and I assume its from dell see the pic. If dells drivers give you grief try installing the vista 64 (if they have it) in compat mode

Ken

 

[TGSoldier]

Mine is 32 bit

Blashphemy!

 

[Muad Dib]

Ken, see I don't have all those tabs, only the 'device settings' tab shows up in regards to synaptics

I got my iTunes set-up, thanks!

& I'm running Windows 7 x64. I can't use the Dell drivers, they say there not compatible, that is why I tried generic synaptics and like I said, just one tab shows and only lets me configure left & right click.... any help?

Well I helped a fellow poster out with this:

Unless Dell decides to OFFICIALY support 64 bit on the A860 you will have to try alternatives.

Dell likes to re-use things/designs/spec between models to save costs.

I would try this one first (reported to work on Latitude D830)

Drivers and Downloads

I have not tried it yet on a Latitude I will be upgrading.

I strongly suggest you do an image backup or at least a restore point before the install.


The actual thread is here:

Dell Vostro A860 - touchpad driver

He reported back that it worked just fine.... if you have a Dell it might be worth a shot.

 

[eli2k]

Ken, see I don't have all those tabs, only the 'device settings' tab shows up in regards to synaptics

I got my iTunes set-up, thanks!

& I'm running Windows 7 x64. I can't use the Dell drivers, they say there not compatible, that is why I tried generic synaptics and like I said, just one tab shows and only lets me configure left & right click.... any help?

If you don't have those tabs, then it means you haven't installed the Synaptics driver yet, or it hasn't been installed yet. Best option is to get some sort of x64 drivers (Vista, maybe) from the manufacturer website. Are you sure it was installed when you ran the installer? If you're able to unzip or extract the file, you can manually update the driver for the touchpad in Device Manager; I think I installed it this way on my laptop, and it loaded the software on its own.

 

[ace2525]

Well I helped a fellow poster out with this:

Unless Dell decides to OFFICIALY support 64 bit on the A860 you will have to try alternatives.

Dell likes to re-use things/designs/spec between models to save costs.

I would try this one first (reported to work on Latitude D830)

Drivers and Downloads

I have not tried it yet on a Latitude I will be upgrading.

I strongly suggest you do an image backup or at least a restore point before the install.


The actual thread is here:

Dell Vostro A860 - touchpad driver

He reported back that it worked just fine.... if you have a Dell it might be worth a shot.

THANKS! this worked perfectly. Last question, is there anyway to get the recycle bin docked on the taskbar? I know the workaround via creating a toolbar but I just want to have it appear like the rest of my docked apps....

also with iTunes I just took over access of the music folder on vista and then copied over the itunes playlist file and successfully got my playlists back. Now if I sync my iPod to Windows 7 will it think it is a whole new library and re-write everything or will it just think its the same as always and only add new songs that weren't on it before?

 

[zigzag3143]

THANKS! this worked perfectly. Last question, is there anyway to get the recycle bin docked on the taskbar? I know the workaround via creating a toolbar but I just want to have it appear like the rest of my docked apps

Ace

Yep there is in the tutorial section search for pinning to taskbar.

Glad you are working. dell is a pita abt drivers even for 32 bit

Ken

 

[ace2525]

Ace

Yep there is in the tutorial section search for pinning to taskbar.

Glad you are working. dell is a pita abt drivers even for 32 bit

Ken

I know how to pin apps to the taskbar, you just drag them. But when you drag the recycle bin it only pins to windows explorer which i dont want

 

[zigzag3143]

I know how to pin apps to the taskbar, you just drag them. But when you drag the recycle bin it only pins to windows explorer which i dont want

Ace I have seen it but need to find it. Im sure someone will have the answer on the tip of their tongues.

KEn

 

[ace2525]

Ace I have seen it but need to find it. Im sure someone will have the answer on the tip of their tongues.

KEn

found it just cant get it to show when empty or full, have to choose one or the other via the 'create shortcut' work-around...

anyone know if i should try and sync my ipod to my windows 7 partition? Will it overwrite everything or should it work fine since it is using the same library as my vista partition

 

[Muad Dib]

THANKS! this worked perfectly....

Glad to hear the touchpad driver worked!

 

[ghanks]

I got my DELL D830 Laptop touchpad to scroll by installing the ALPS driver for the Inspiron machine (latest driver from alps for win 7) It installed and worked first time. The synaptics driver is for different hardware.
Version Alps TouchPad, v.7.1209.101.204, A05