Windows 7 Pro: Driver Power State Failure ntoskrnl.exe 0x9F

[Mikis93]

Hello,
I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.
My minidump file: https://drive.google.com/file/d/0Bz9cGU6cYQtqMy0wSHFkbmRPMkk/edit?usp=sharing .

DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80`07d0ba10
Caused by Driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75bc0
File description: NT Kernel & System
Crash address: ntoskrnl.exe+75bc0

Windows 7 Professional x64 Service Pack 1
Lenozo Ideapad z500
8gb ram, NVIDIA GEFORCE 2gb
Intel Core i7

Any help is greatly appreciated!

 

[matts6887]

from the research Ive done previously etc; I do believe the ntoskrnl.exe possibly leads to ram issue. I would test the ram by running memtest86+ from the following link: its best to let it run overnight if possible and to run it several times to make certain it shows accurate results as sometimes errors wont show up right away. Here is the link to that:

Memtest86+ - Advanced Memory Diagnostic Tool

If you get any errors from the test; then its likely you have one or more bad ram sticks

 

[Golden]

Additional information is required.

1. Download this .BAT file to your desktop

Download


2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

 

[Mikis93]

ZIP file: https://drive.google.com/file/d/0Bz9cGU6cYQtqU3d0Y1RTWVlsRW8/edit?usp=sharing

 

[Golden]

Please upload the zip file directly to the site using the image shown in post #3.

 

[Mikis93]

Now the zip file is attached to the previous post.

 

[Golden]

There aren't any .dmp file in your attachment. These are required to analyse the BSOD.

Follow these steps:
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

Then, when the system next BSOD's, follow this:

1. Download this .BAT file to your desktop

Download


2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

 

[Mikis93]

The .zip file and the .dmp file are attached to the post.

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80076ef060, fffff80000b9c3d8, fffffa8007468010}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> lmvm nvlddmkm
start             end                 module name
fffff880`0f467000 fffff880`1015b000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
   [COLOR="Red"] Timestamp:        Wed Oct 03 03:51:13 2012[/COLOR] (506B3099)
    CheckSum:         00CD4613
    ImageSize:        00CF4000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Perform a Windows Update and check what is offered in the optional updates.

 

[Mikis93]

I have installed all the updates from Windows Update (important and optional updates), but the blue screen reappeared.
The new .zip file and the new .dmp file are attached to the post.