1. Log on to the user account that you want to create this task to run for.
2. Open the Start Menu, then type
taskschd.msc in the search box and press enter.
3. If prompted by
UAC, click on
Yes.
4. In the left pane of Task Scheduler, click on the
Task Scheduler Library folder, then click on
New Folder in the far right pane. (see screenshot below)
5. Type in a name (ex: program name "Core Temp") you want for the new task folder to make finding the task easier, then click on
OK. (see screenshot below)
6. In the left pane of Task Scheduler, click on the new task folder (ex: Core Temp), and click on
Create Task in the far right pane. (see screenshot below)
7. Under the
General tab, type in a
name for the task (ex: Program Name "Core Temp"). (see screenshot below)
8. Under the
General tab,
- If Used in a Administrator User Account
- Check the Run with highest Privileges box. (see screenshot above)
- If Used in a Standard User Account
- Leave the Run with highest Privileges box unchecked. (see screenshot above)
9. Click on the
Configure for drop down box to open it, and select
Windows® 7, Windows Server™ 2008 R2. (see screenshot above and below)
NOTE: This is like compatibility mode. If the program does not support running in Windows 7 normally, then you can select the OS that is does support running in instead to have it run in compatibility mode as if it was running in that OS instead of Windows 7.
10. Do
steps 11 and/or 12 below for when you would like to have this task run.
11. To Have the Task Run "At startup"
A) Click on the Triggers tab and New button. (see screenshot below)
B) In the
Begin the task drop down menu list, select
At startup. Next, make sure that
Enabled is checked, and click on
OK. (see screenshot below)
C) Do
step 12 as well. It is required for the "At startup" to work.
12. To Have the Task Run "At log on"
A) Under the
Triggers tab, click on the
New button. (see screenshot below)
B) In the
Begin the task drop down menu list, select
At log on. Next, make sure that
Enabled is checked, and click on
OK. (see screenshot below)
13. Click on the
Actions tab and
New button. (see screenshot below)
14. In the
Action drop down menu list, select
Start a program, then click on the
Browse button. (see screenshot below)
15. Navigate to and select the program's
EXE file or
shortcut to the EXE file, then click on
Open. (see screenshot below)
NOTE: Remember that a standard user account cannot run a elevated program at startup or log on. See NOTE at top of tutorial for more information.
Tip
If you created an
elevated program shortcut and wanted to run it at startup and/or log in, you would enter the full path of the elevated program shortcut here.
16. Click on
OK. (see screenshot below)
17. Click on the Conditions tab, and uncheck the Stop if the computer switches to battery power box first, then uncheck the Start the task only if the computer is on AC power box. (see screenshots below)
NOTE: This step is mostly for laptops, so that you will be able to run the program when the laptop is running on battery power.
18. Click on the
Settings tab, and check the
If the task fails, restart every box. (see screenshot below)
19. Click on
OK. (see screenshot above)
20. You can now close Task Scheduler. (see screenshot below)
NOTE: If you look in the middle pane under the Author column for the task that you just created, you will be able to tell what user account the task is for.
21. Log off and log on this user account, or restart the computer to test you new task.
Tip
To Delete the Task:
If you decide you would like to delete the task later, then you can right click on the task (step 8) in the middle pane and click on Delete and Yes. Next, you can delete the task folder (step 5) when empty the same way. (see screenshot above)
That's it,