New
#100
ASUSTeK Computer Inc.
P5K-E/WIFI-AP
P5K-E
ASUSTeK Computer Inc.
P5K-E/WIFI-AP
P5K-E
I have looked every where and still did not found that download.. i have P5K with out that 'e' ..
And?.. its a driver cd with option for F6 with floppy disk which i don't have..
Any ways thank you for the help but its a no go.. drivers are just stronger then me..
Enter BIOS and do the following:
Enter Integrated Peripherals>On-Chip IDE Configuration
On-Chip ATA(s) Operate Mode:[Native Mode]
ATA Configuration:[P-ATA Only]
S-ATA Keep Enabled:[Yes]
P-ATA Keep Enablednot available)
P-ATA Channel Selection:[Both]
Combined Mode Optionnot available)
S-ATA Ports Definition:P0-3rd. / P1-4th or P0-1st. / P1-2nd.
but i use this to
ms=6788 or 848P Neo desktop machng
its works for me credites go to thunder in msi -forum
Hi
I made the iso cd, booted from it, but it gave me an error, "The iaStor.sys file is corrupted".
CPU-Z shows that I have an Intel P35/G33/G31 chipset.
I downloaded the drivers from http://downloadcenter.intel.com/Sear...90&FamilyId=40
The 64-bit version since I have Windows 7 Home Premium 64-bit.
Did I download the wrong file or do something wrong?
Thanks in advance.
First check for all the Win XP drivers for your hardware on the manufacturer's web site.
If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
SATA Drivers - Load in Windows XP Setup on Dual Boot
If you have a Intel Sata Controller.
You can download your F6 Sata Controller drivers from here:
Intel Sata Controller Drivers
Can you post your specs.
Filling out System Specs
Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums
Do you slipsteam all sata conrtroller model's in.
when i inserted the disk ,when they say setup is loading windows the com crashes.I use Gateway sx 2850.Help!!!The xp disk has no drivers because when i put the drivers in the 7 com dont boot from it anymore...
First check for all the Win XP drivers for your hardware on the manufacturer's web site.
If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
SATA Drivers - Load in Windows XP Setup on Dual Boot
OR
SATA Drivers - Slipstream into Windows XP CD
Your Gateway sx 2850 has a Intel Sata Controller.
You can download your F6 Sata Controller drivers from here:
Gateway Support - Downloads & Support Documents - Desktop / SX Series / SX2850
But I dont understandwhy it crashes instead of showing that no sata drivers are loaded???