New
#1
BSOD on Sleep, error 0x0000009f and others
Hello All,
Please help me with my BSOD problem. I attached three screen shots of BSOD and the zip file as requested.
Thanks a lot in advance for your help
Hasan
Hello All,
Please help me with my BSOD problem. I attached three screen shots of BSOD and the zip file as requested.
Thanks a lot in advance for your help
Hasan
Welcome
There are no dump files in the zip attached. Please make sure you're following the instructions carefully.
If there are no dump files generated, go through this thread:
→ Dump Files - Configure Windows to Create on BSOD
I am sorry,
Here it is again.
Thanks in advance
Hasan
Dump does not give accurate information.
Enable Verifier:
Driver Verifier - Enable and Disable
Hello again,
I enabled the vrifier and had two crashes afterwards, I did a grab after each one so I will post both.
Thanks a gain for your support
The dump does not show you have verifier installed.
Is this a new computer and is it under its warranty? Since when are you having these problems?
Please reduce items at start up follow this tutorial:
Run the System File Checker that scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
Run Disk Check for file system errors and bad sectors on it
Disk Check
Did you make a full scan with your antivirus?
Hello there,
I am sorry I keep disappearing but my problem disappears each time I write here and then comes back again after a couple of weeks, its like my computer has a brain and is trying hard not to let me fix it!
Anyway, I tried the scan now command, it reaches 34% then I get a message saying that "Windows Resource Protection could not perform the requested operation"
I am uploading the zip file again in a hope that there is useful data in it this time.
Thanks a lot for your help.
Your BSOD is related to Anchorfree HSS Adapter and it's Possible BSOD cause seen in mid-2012
Look for possible driver updates for it. Driver Reference TableCode:0: kd> !irp fffffa800b68d400 Irp is active with 3 stacks 2 is current (= 0xfffffa800b68d518) No Mdl: No System Buffer: Thread 00000000: Irp stack trace. cmd flg cl Device File Completion-Context [ 0, 0] 0 0 00000000 00000000 00000000-00000000 Args: 00000000 00000000 00000000 00000000 >[ 16, 2] 0 e1 fffffa8008f95050 00000000 fffff80003acd200-fffffa800b54d950 Success Error Cancel pending \Driver\taphss nt!PopSystemIrpCompletion Args: 00014400 00000000 00000004 00000002 [ 0, 0] 0 0 00000000 00000000 00000000-fffffa800b54d950 Args: 00000000 00000000 00000000 00000000
Try SFC /SCANNOW : Run in Command Prompt at Boot if that does not work, consider a clean install.Code:0: kd> lmvm taphss start end module name fffff880`04d2a000 fffff880`04d37000 taphss T (no symbols) Loaded symbol image file: taphss.sys Image path: \SystemRoot\system32\DRIVERS\taphss.sys Image name: taphss.sys Timestamp: Wed Sep 16 01:58:23 2009 (4AAFF1DF) CheckSum: 00017426 ImageSize: 0000D000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Hello again,
I removed the program associated with the driver you mentioned and I was ok until 3 days ago when my Windows updated, immediately my computer stopped going to sleep I did a system restore but the problem is still there, the screen goes off but the hard disk keeps working until I force it to shut down, could this be related or should I create a new post somewhere else?
I really appreciate your help by the way
Hasan