Show Us Your Rig [2]

[Chiumiento]

Sharky's got a case similar to that.
Can be seen earlier in this thread...
Post #333

Yes I saw that rig also. Both of these machines are amazing. I could only imagine owning one.

 

[thobel]

Ok, I've seen some pretty cool looking cases, and some very well done internals.
But never have I seen a case being polished by a guy wearing surgical gloves...

Acrylic leaves prints easy

Dude is that a custom case? OR can you actually buy that? sweet rig.. lots n lots of room haha

Case is a danger den custom case. Its more or less 2 dd29's combined

Thanks to all the the kind words on my system and thanks thobel as I have to go and kick my new rig and ask why it couldn't have grown up like your rig ! :roflmao::roflmao: But seriously that is one sick rig, I'm sure you could run a samll country with that thing, man enjoy and keep us in the loop on how it benches !

Away on vacation in Miami will run benches when i get back

Specs of rigs for those interested

980x
3x gtx 580's
asus R3E
3x Intel x25m g2 160's

all under water

120.18 of rads

 

[thobel]

Sharky's got a case similar to that.
Can be seen earlier in this thread...
Post #333

His looks like a mountain mods not sure though. Main differenc eis mines acrylic his is steel/aluminum

 

[LiquidSnak]

Here is my WEI.
I find it odd that my RAM is so low though.

View attachment 131854

~Lordbob

Are you running it in dual channel? My 4GB was 5.9 until I set up dual channel.

 

[Lordbob75]

Here is my WEI.
I find it odd that my RAM is so low though.

View attachment 131854

~Lordbob

Are you running it in dual channel? My 4GB was 5.9 until I set up dual channel.

TBH, I don't really know how. The mobo should do it automatically, but I will check (with the new one too)

~Lordbob

 

[brayway]

Here's mine

'Tis out of the 800D as I am about to cut the top open and install a 480 rad in it


Click to view full size!


Click to view full size!


Click to view full size!

 

[Dave76]

Here is my WEI.
I find it odd that my RAM is so low though.

View attachment 131854

~Lordbob

Are you running it in dual channel? My 4GB was 5.9 until I set up dual channel.

TBH, I don't really know how. The mobo should do it automatically, but I will check (with the new one too)

~Lordbob

Check your mobo manual it will tell you what slots the two cards should be in for dual channel, if they're in the wrong slots it will be single channel.

 

[Lordbob75]

Are you running it in dual channel? My 4GB was 5.9 until I set up dual channel.

TBH, I don't really know how. The mobo should do it automatically, but I will check (with the new one too)

~Lordbob

Check your mobo manual it will tell you what slots the two cards should be in for dual channel, if they're in the wrong slots it will be single channel.

Yeah, they are in the right slots and it looks like they should default to dual channel....
Oh well, I did buy budget RAM (and all parts really...)

New parts will fix that problem

~Lordbob

 

[sygnus21]

Lordbob something doesn't sound right.

Use CPU-Z to see what you memory is running at. See this post - http://www.sevenforums.com/crashes-debugging/138554-new-rig-radeon-6950-trouble-2.html#post1191297. Click the "Memory" tab and look at the "Channel" block. Should say Dual (Triple for 1366 socket MB, though the modules themselves is running in dual channel mode)

As well as this - http://www.sevenforums.com/crashes-debugging/138554-new-rig-radeon-6950-trouble-2.html#post1191432

At any rate your RAM should be running in dual channel mode - unless you specifically bought single channel.... which I didn't/don't think is possible for today's systems.

 

[Lordbob75]

Lordbob something doesn't sound right.

Use CPU-Z to see what you memory is running at. See this post - http://www.sevenforums.com/crashes-debugging/138554-new-rig-radeon-6950-trouble-2.html#post1191297. Click the "Memory" tab and look at the "Channel" block. Should say Dual (Triple for 1366 socket MB, though the modules themselves is running in dual channel mode)

As well as this - http://www.sevenforums.com/crashes-debugging/138554-new-rig-radeon-6950-trouble-2.html#post1191432

At any rate your RAM should be running in dual channel mode - unless you specifically bought single channel.... which I didn't/don't think is possible for today's systems.

It definitely says dual channel.

~Lordbob

 

[sygnus21]

Than the memory IS running in dual channel mode. What speed was it running at? Same tab.

 

[Lordbob75]

~Lordbob

 

[crazyeyeschase]

Looks like its running in Dual to me...

Are they rated at 1066?

 

[sygnus21]

View attachment 133105

~Lordbob

Your memory is running at 1066MHz, 7-7-7-24 CR 2T. Nice memory. Could probably change Command Rate (CR) to 1T for better performance, though it's nothing you'd notice in everyday apps.

What's you SPD tab show? That'll also show what voltage you should be running with 1066MHz

 

[Linkin]

Various photo's

 

[D3LL]

Specs:
CPU: AMD Phenom II X6 6 CPUs 3.02GHz (will be 4.2 once I get a new PSU)
Motherboard: ASUS Crosshair IV Formula S-AM3
RAM: 8GB DDR3 Corsair Dominator Ram
PSU: Antec 700W PSU
Video Card: Nvidia GeForce GTX 470

Pictures:
Desk view:

Tower Day:

Tower Night:

New Router:

Inside 1:

Inside 2:

Please leave comments

 

[linnemeyerhere]

Just ordered a MSI R5770 Hawk GPU and another stick of Corsair 4gb ram. The current BFG GTX260 works great once I can get it past the start up blue screen but must be replaced. I'll post pictures of the new card with my new mobo as soon as installed. This combo will allow me a great deal of flexibility and a stable OC.

 

[OneSerious]

New cable sleeving, I just added.

 

[sygnus21]

Is tha NZXT cable?

NZXT :: Unique. Unprecendented. Inspired - Product

 

[linnemeyerhere]

kyle,
It's these little attention to details that make all the difference. Great job and in know way do I imply that that job was little. Oh and nice job shortening the Corsair H50's cable....yes I noticed! You've got one of the cleaner systems currently showing here. Look at mine and the difference is very noticeable....it's all good !