BSODs, need helping identifying cause - dumps included

[panais]

Have been running for a week with no issues, i am about to install my wacom tablet, and download the most recent drivers. fingers crossed it dosent cause BSODS. will report back if anything happens

If you cant remember,the Wacom(tablet) Mouse Filter cause you a lots of troubles\bsod.

If its possible dont install or use it!!

 

[jon0705]

Yeah, i know, but i need it to do work on, so i dont really have much of a choice : /

 

[jon0705]

Had a Bsod this morning, my tablets been installed for 3 days, pc has been running fine since the 6th. uploading dumps

 

[jon0705]

And another, Do these dumps point towards the wacom tablet again? : /

 

[zigzag3143]

Had a Bsod this morning, my tablets been installed for 3 days, pc has been running fine since the 6th. uploading dumps

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

 

[jon0705]

I downloaded the folder, and ran the program which proceeded to run, then restarted my pc. I looked in my drivers folder and checked the sys file. it says date modified 14/05/2009, i have uploaded a picture.

Thanks for the advice!

 

[zigzag3143]

I downloaded the folder, and ran the program which proceeded to run, then restarted my pc. I looked in my drivers folder and checked the sys file. it says date modified 14/05/2009, i have uploaded a picture.

Thanks for the advice!

Let us know if you are still having problems.

 

[jon0705]

I've had a couple more blue screens, seems to be the same problem, can just happen with no warning. I have a message in my action center saying install my power management drivers (AMD cool and quiet, sol i'll try that now see if it helps,)

Anyway here are the dumps

 

[jon0705]

And again. Just wish i knew what was doing this.

 

[jon0705]

And another, this time it said something about directx

 

[jon0705]

Anyone able to have a look at these tell me if theres an identifiable cause yet?

 

[zigzag3143]

Anyone able to have a look at these tell me if theres an identifiable cause yet?

The most recent two were related to memory corruption. This is a long, long thread and I am unsure as to what hase been done so

These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.


1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html



2-Driver verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

 

[jon0705]

I know its gotten long, but ive only has this current installation of windows a couple of months. I ran many hardware tests before to no avail, however, since its a clean install i will run them all again and post back.

( Just a note. I have been able to play games like battlefield 3 on high settings all day and had no BSODS, majority of the time, they happen very shortly after booting up / logging in and seem to have no direct cause)

 

[jon0705]

Been running verifier for a few days, had 2 BSODs today, here's the dumps, will run memtest over night tonight or tomorrow.

 

[jon0705]

And a third!

 

[jon0705]

checked memtest after about 8 passes, an error had come up, any idea if its ram or motherboard?

Ive ran memtest with 1 stick of ram in slot 1, after around 9 passes an error showed up, i tested stick 1 in slot 2 for 18 passes and no errors showed up.

I then tested stick 2 in slot 1 for 13 passes and no errors showed up.