Need a Debugging read

[manolz]

Might want to mention that they were driver verified.

Aye... I suppose it is up to the OP to continue testing with driver verifier running after uninstalling the offending driver. I think it might be safe at this point to disable verifier and run normally and not remove trixx software.

Thanks zigzag3143. I assumed the verifier was intentional, but after reading over the previous posts again, now I see your point.

Okay great, If I crash once more I'll start up verifier again and update accordingly.
I've disabled my Trixx to boot on Windows Startup and I'll start opening it manually.

Thanks again

 

[writhziden]

Okay great, If I crash once more I'll start up verifier again and update accordingly.
I've disabled my Trixx to boot on Windows Startup and I'll start opening it manually.

Thanks again

Alright, keep us updated. Hope it works, and good luck!

 

[zigzag3143]

If Trixx is indeed the cause it wont matter if it is started automatically or manually.

 

[manolz]

If Trixx is indeed the cause it wont matter if it is started automatically or manually.

Can you verify that Trixx isthe cause? Nevertheless can we agree I can keep Trixx (verifier is disabled)

I haven't crashed yet, What do you recommend?

 

[zigzag3143]

If Trixx is indeed the cause it wont matter if it is started automatically or manually.

Can you verify that Trixx isthe cause? Nevertheless can we agree I can keep Trixx (verifier is disabled)

I haven't crashed yet, What do you recommend?

If I remember correctly you were having crashes before you ran verifier, and Trixx was shown as the cause. Verifier had nothing to do with the driver misbehaving it just flagged it is the one that was causing the problem

Trixx was blamed.

Your call as to how annoying the BSOD's are and how important Trixx (whatever it is) is to you.

 

[manolz]

Trixx has been removed and this is a recent crash.

This analysis will be helpful, can you shed some light?

Thanks

 

[zigzag3143]

Trixx has been removed and this is a recent crash.

This analysis will be helpful, can you shed some light?

Thanks

Uptime was over 4 hours and blamed on memory corruption.

 

[manolz]

Now I can't even boot into Windows? I'm getting constant BSOD, won't even boot up into operating system.

What to do? , Also when you say memory corruption you mean my corsair vengeance sticks?

 

[manolz]

Also I just used ATIMan Uninstaller as I was re-installing video drivers. The minidump BSOD happened during BF3, now after ATIMan Uninstaller saga I can't get back into Windows.

 

[manolz]

My memory has been tested a few times for hours memtest86 and passed, and my CPU has been tested Prime95 and passed no problems.

 

[manolz]

Ok I went into my Windows cd and did a system repair, I'm assuming all these crashing are hard disk related??. I'll update with mindump files, can you guys notify me as to what the issue is? I'm going to be performing a sfc /scannow and report back , thanks

 

[manolz]

Minidump files weren't saved so I can't post them.

 

[zigzag3143]

Minidump files weren't saved so I can't post them.

The next ones should be saved

 

[Dave76]

Since this is possibly hardware related, can you update your 'System Specs'?
Give as much detail as you can.


Speccy Free System information Utility
Speccy - Free software downloads and software reviews - CNET Download.com

http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html


You said you ran memtest86+, for how many passes?

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
CPUID - System & hardware benchmark, monitoring, reporting

 

[manolz]

Since this is possibly hardware related, can you update your 'System Specs'?
Give as much detail as you can.


Speccy Free System information Utility
Speccy - Free software downloads and software reviews - CNET Download.com

http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html


You said you ran memtest86+, for how many passes?

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
CPUID - System & hardware benchmark, monitoring, reporting

memtest86 ran for 4hours "overnight, also primed for 6 hours Blend.

Noticed my Crossfire is disabled.

 

[manolz]

I think it's my graphics that's the issue, It won't allow me to install new drivers, Driver INF failed and now won't install old drivers.

 

[Dave76]

We can discuss removing and installing the graphics drivers and testing the graphics cards but first can you clarify a couple of things for us?

Which version is your motherboard?
Look in the lower left corner of your motherboard, it will have the Rev#.

For future reference, you need to run memtest86+ for a full 8 passes. The time is less important than the number of passes.
With 8GB RAM it will take more than 4 hours.

Are you overclocking CPU, GPU or RAM?

Your RAM frequency is at a non default level and not set to any SPD setting.
Your HT Link frequency seems to be at default.
The CPU voltage seems to be high for 1144MHz.
What are your CPU core temps at idle and at full load?
Use Core Temp

Do you have Cool'nQuite enabled?

Your System Specs say 2X2GB Patriot RAM, CPUZ SPD tab for Slot#1 says 4GB Corsair RAM.
Are you running three RAM cards?
Mixing RAM cards, brands, timings and frequencies can cause system instability.
Post the CPUZ SPD tab for the Patriot RAM.

The BIOS version is FGF which is a beta BIOS.
As the Gigabyte site says:

please use previous BIOS version for full functionality

Latest full BIOS version is FF.