BSOD ntoskrnl.exe-7f1c0 while idling

[natteulven33dk]

ok i will try it

have stopped verifier now only got 1 BSOD and has now set the hdd/ssd idling to never so it wont turn off ill see when ill get a BSOD again then

 

[natteulven33dk]

been running verifier

and the latest BSOD's in the zip file from today the 29. is with verifier !

 

[carwiz]

From what I can see, you're still getting IO Errors. I already deleted your previous uploads so can't check but where is your pagefile? I recall your log files were in Danish and I can't read them so I'm dummied out of any further help.

 

[natteulven33dk]

im thinking could i try to install my windows on my large 2 TB non SSD HDD and try to rule out the SSD ? and my page file what you mean ? where it is located or ?

 

[natteulven33dk]

and i think my CD drive is connected to a 3rd party Asmedia SATA on my Motherboard could that interfere ?

 

[carwiz]

Yes, where is your pagefile located? Also, post a snip (picture) of your Disk Manager screen.
It will look something like this:

 

[carwiz]

and i think my CD drive is connected to a 3rd party Asmedia SATA on my Motherboard could that interfere ?

It shouldn't but I'll look at the specs if you can find the model number of the Asmedia card.

 

[natteulven33dk]

Screenshot as asked for

Uhh the model number for the asmedia one hmm it is just on the motherboard does it have a seperate modelnumber hehe :S

Nevertheless here is a screenshot of what you asked

 

[natteulven33dk]

and my Pagefile should be located on C: i think :S cant seem to find it but on the screen shot it says Sidefil Which is the danish word for Pagefile

 

[carwiz]

Well, I asked for that didn't I. My sparkenputin must not be working. I think you have too many "Aktiv" partitions. There should be only one--The system (boot) partition. You'll notice in my display, there's one "Active" partition.

Use this tutorial to set all the other partitions to inactive. That could be why you're getting the I/O errors.

I thought the Asmedia was a separate add-in card but no matter. Try the above and let us know.

 

[natteulven33dk]

now only the boot drive is active but is still getting BSOD the same error etc just got one... and im running Verifier atm !

 

[carwiz]

Ok, bummer. We'll wait for fresh dumps.

 

[natteulven33dk]

should i delete dumps of older date before posting again ?

 

[carwiz]

Leave them there for reference unless you're short on space. We can find the new ones.

 

[natteulven33dk]

new BSOD's

2 from yesterday late hours and 2 from today .. !

 

[carwiz]

Same I/O problem, just flip-flopping processes.

What drivers are listed for all SATA devices on your system? Use Computer Management>Device Manager and expand IDE/ATA Controller. Right click on the device and click Properties. Click on Driver tab then Driver Details. Report back on what driver(s) is listed. (sample screen below)

I'm seeing some old Adaptec SATA drivers in your driver list. Did you load the drivers from the CD that came with your motherboard?

These were listed:
Modulnavn: adp94xx
Vist navn: adp94xx
Drivertype: Kernel
Link Date: 06-12-2008 00:54:42

Modulnavn: adpahci
Vist navn: adpahci
Drivertype: Kernel
Link Date: 01-05-2007 19:30:09

Modulnavn: adpu320
Vist navn: adpu320
Drivertype: Kernel
Link Date: 28-02-2007 01:04:15


MSI/Intel Drivers: http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064

 

[natteulven33dk]

screenshot

i have taken a screenshot

 

[natteulven33dk]

what are the chances that it is my SSD that is faulty ?!

 

[natteulven33dk]

new screen shot

hmm just noticed that something has changed !?

now only 2 ata channels are present ?!

 

[carwiz]

what are the chances that it is my SSD that is faulty ?!

It's possible, of course, but I thought you said it was tested. I'm leaning toward a driver conflict. I'm a bit confused about your hardware setup but each to his own. Personally, I wouldn't put the DVD drive on the high speed controller. Can you do a driver screen shot of the Asmedia controller too? Might as well include those ATA devices. I'm trying to determine why you have those old Adaptec drivers installed. Do you have other devices installed that's not in your specs? Like a RAID card? The info in your uploads is meaningless to those that can't read Danish. In the mean time, I'll need to study the documentation on your motherboard and see what controllers are used for what SATA channels.

Since this is a new build, you might want to contemplate a fresh install after rearranging the hardware SATA port assignments but more on that later.

So what happened with the CD that came with the motherboard? It doesn't look like you installed the drivers. You're using the Microsoft AHCI driver (default) when the Intel driver will give better performance. Especially for the SSD. But don't load any more drivers just yet.