What's your memory assessment speed? [2]

[linnemeyerhere]

 

[paulpicks21]

Ok 1866, nice score

 

[ganjiry]

Nice 1 chap, i haven't managed to get mine stable at 1866 yet.

 

[Dave76]

Great score, your new build is very nice

 

[linnemeyerhere]

Thanks all, it's really smoking for a old P67A board.

 

[orangearmy]

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>WINSAT MEM
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.30
> Memory Performance 4803.09 MB/s
> Total Run Time 00:00:06.72

Not sure why its this low.

Specs:
Maximus Formula (2009)
Core 2 Quad 6600
8gb DDR2 800Mhz
SSD

 

[Britton30]

Welcome to Seven forums orangearmy.

You Dual Channel mode says Symetric and your SPD is AMP instead of XMP. I'm not sure what those mean but aren't common. Also you have DDR2 800MHz.

 

[StalkeR]

Everything at stock from notebook.

 

[paulpicks21]

Finally managed to break the 30K barrier

 

[ganjiry]

Nice 1 chap. Bostin score

 

[paulpicks21]

Nice 1 chap. Bostin score

Cheers mate.

 

[essenbe]

Finally managed to break the 30K barrier

Good job, Paul. Way to go.

 

[Britton30]

Everything at stock from notebook.

View attachment 245277

You got a good deal on that lappy Bosko.

Finally managed to break the 30K barrier

Bah, anyone can do that in an unheated cabin.

How'd ya do that?

 

[A Guy]

Great numbers Paul

A Guy

 

[paulpicks21]

Thanks Steve and Bill.


Hi Gary, I set the ram to 2200mhz in the bios, changed the BCLK to 102 to give a further 44mhz, voltage was 1.65, PPL Overvoltage was enabled and even with the overclock I managed to tighten the timings a little which helped. Also I turned hyperthreading off which gave an extra bit.


This was just to see if I could reach 30k, for a daily OC I have it running 2200mhz at 1.6v and hyperthreading on which gives a speed of around 29100.


Paul.

 

[Britton30]

Thanks Paul, I can't get my 2133 Snipers to run at 2200 and I have tried many different setting. I think it's a limitation of my CPU though.

 

[paulpicks21]

Thanks Paul, I can't get my 2133 Snipers to run at 2200 and I have tried many different setting. I think it's a limitation of my CPU though.

It could very well be Gary, I am not too sure.

I remember I managed to get this ram to run over 2200mhz on my 2600k but it didn't quite reach 30k. I am not sure how the i5's are regarding memory compared to the i7's.

At any rate from seeing your score before you get very good speeds at 2133mhz.

 

[scottiemedic]

Here's mine, can someone lead me down a path to increasing efficiency or is this normal?

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.13
> Memory Performance 17988.65 MB/s
> Total Run Time 00:00:15.69


I have a GA-Z68-UD3P running a stock speed i5-2500k and 4x4 Patriot 1333MHz FSB Silverline. Any other info needed at this time? Thanks in advance!!

 

[A Guy]

Welcome to Seven Forums scottiemedic. Those seem to be normal numbers for 1333MHz ram. I get just under 20000 for my 1600MHz. A Guy

 

[scottiemedic]

Thanks A Guy. Now to get a plan together to play with overclocking this bad boy!!!