WINDOWS 7 64bit ultimate RTM RANDOM LOCK UPS

[windew420]

WINDOWS 7 64bit ultimate RTM 7600 RANDOM LOCK UPS

when it locks up i cant even do a ctrl alt del
i have to hold power button down for 10 sec to shutdown
errrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
i wanna buy it when it comes out but this is not looking good
maybe ill have to get a evga or some new i7 mb

my specs

i have tried 1606 and several different bios ver
same bs

asus p6t deluxe 1605 bios
intel i7 940 stock ghz
corsair 6gb xms3 ddr3 9-9-9-24
xfx geforce gtx 280
coolermaster 850 watt
1.5tb seagate sata
500 gb seagate sata

i installed the latest intel x58 drivers and nvidia drivers

ran diag on every thing is ok
dft hd fine
memtest86 ram fine
i also ran motherboard test and every thing passed

also i got similar (my spelling sucks) lockups in vista
xp64 sp2 works great
thanks for any help

 

[zigzag3143]

windew420

Did you do a clean install?
Ken

 

[windew420]

yes i did clean install

 

[windew420]

help

 

[zigzag3143]

help

windew

Lets start by looking in event manager (type eventmgmt.msc in search). look for any relevant errors in the app tab. if therer are you should take a scrnshot of it by using the snipping tool in win 7 (type snipping tool in search) and upload it to us

then look in device manager (type devmgmt.msc in search) and look for any unknown devices.

Also if you get BSOD's from this go into the C:\windows\minidump for the dump file. zip it and upload it to us. If you dnot have bsod's disregard this.


Lets start with that

Hope this points you in the right direction

Ken

 

[SquonkSC]

help

I wonder about your PSU? What brand and type is it?

You have one helluva system.

I've looked around a bit and found this:
your mainboard + CPU under load uses 240 Watts
Your GPU under load uses 236 Watts
Memory 6 x 2,5 watts 15 watts
1,5TB disk idle 8 watts, normal use 20 watts

That makes 511 watts

If your PSU consumes 750 watt max.

If it is at 80% efficiency, it can produce max of 600 watts

The continues watts may be a lot lower.

So my question is.

Do these crashes appear when the computer is under load, or also when it's idle?

If it always happens under load, it might be a power problem.

If this is not the case, you might up the voltage on your ram a little.
Not to much though, just very small steps.

good luck

 

[windew420]

when its is not locking up it runs great
also it boots up from post to windows fully booted in lik 1min 15sec or faster
i cant wait to fix this issue i will get a ssd soon once issue is figured out
it locks up on any random program
i hope its just a software fix. id hate to rma my psu
my psu is a cooler master r-850-emba

 

[zigzag3143]

windew420

You over clocking?

Ken

 

[windew420]

hey zigzag i will send u info when i reboot to night because iam in xp64 right now cause of the lockups in win7 64 ultimate

 

[windew420]

no overclocking

 

[windew420]

thanks for the fast responses you guys are awesome i cant wait to have stable win7 cause it makes my i7 scream

 

[SquonkSC]

no overclocking

up the voltage on your ram a little.

Careful though. only 0.1 per instance and see what happens

 

[windew420]

ty i will try
will post what happens after i try increasing ram voltage

 

[windew420]

i just dont understand why it dont work out of the box?

 

[windew420]

oh yeah the only apps that run on the taskbar is utorrent and avg so if that helps

 

[SquonkSC]

i just dont understand why it dont work out of the box?

Could be a number of reasons.

You have 6 high performance ram sticks. They might need just a little more juice to run stable.

I'm not saying it is the issue, but you could try it out.
Don't go further than +0.3 though.

Good luck.

I'm off to bed.

Greetz

 

[TGSoldier]

IMO, the fact that it's freezing means something is not getting enough power. Like squonksc said, up the voltage on your memory in small increments. If that does not work, then you can try upping the voltage to your cpu in small increments as well...


But then again you said it works great on xp right?

You have all the latest drivers?

 

[windew420]

my system is not overclocked
and xp64 does run great.
yes i installed all the newest drivers.

 

[windew420]

i hope it works

ok well see what happens i set my ai profile to xmp setting

 

[windew420]

i went way up my ram voltage when

i went way up my ram voltage when i set my ai settings in bios to xmp setting
it made the ram voltage from 1.2 to 1.5 volts lol

Could be a number of reasons.

You have 6 high performance ram sticks. They might need just a little more juice to run stable.

I'm not saying it is the issue, but you could try it out.
Don't go further than +0.3 though.

Good luck.

I'm off to bed.

Greetz