4818MHz Amd FX-8350

[BigTabs]

Temps VID

 

[linnemeyerhere]

That's a great processor, I have a 8120 FX rig and it's a monster !

 

[BigTabs]

I love AMD price makes me happy performance could be better people should agree with that part of things

Obviously OC makes AMD Shine

 

[BigTabs]

Will stat the improvements AMD have done so far is promising

But Excavator 2014-2015 if what i hear/heard is true Intel Might Have there Work Cut Out Time well tell

As competition Is not high with AMD i feel

But price is a biggy and i feel I am getting what i pay for People say its a bad processor poor quality

But hears the thing OverClocking with AMD has Always gave consumers the option i think way before intel i could be wrong

OverClocking opens a new door with AMD and you can see a shed load of difference

I dont faver any CPU i do Pref AMD for price and what you can do with it

 

[linnemeyerhere]

Bang for buck and the fun of the OC is the AMD advantage. Heat, Stability and Performance and the favor tips to Intel. But I have three AMD rigs and two Intel I dig them all and really love the lower cost AMD performance.

 

[BigTabs]

Its always between Price VS Performance

 

[BigTabs]

Have you managed to get Screenshots linnemeyerhere

 

[Solarstarshines]

nice speed there I want back to my old settings it's been behaving itself and passed IBT fine

 

[BigTabs]

nice speed there I want back to my old settings it's been behaving itself and passed IBT fine

What temps you getting

 

[Solarstarshines]

nice speed there I want back to my old settings it's been behaving itself and passed IBT fine

What temps you getting

max during IBT was 50c CPU socket 51c

 

[BigTabs]

Which part on aida is socket temp ????

 

[Solarstarshines]

Which part on aida is socket temp ????

for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

 

[BigTabs]

Which part on aida is socket temp ????

for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

Your the brains thank you what would i do with out Solarstarshines helping me

 

[Solarstarshines]

Which part on aida is socket temp ????

for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

Your the brains thank you what would i do with out Solarstarshines helping me

No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid

 

[BigTabs]

for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

Your the brains thank you what would i do with out Solarstarshines helping me

No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid

On min can you point out where i should be looking its differant to yours well same but info is not there

 

[Solarstarshines]

Your the brains thank you what would i do with out Solarstarshines helping me

No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid

On min can you point out where i should be looking its differant to yours well same but info is not there

TMPIN0
TMPIN1 -TMPIN2 not sure why it is there could be the chip itself if you notice lot lower then the others
could be ram sensor but I know for sure TMPIN0 and TMPIN1 are the cpu and mb

lol lol I was right read here http://randomroms.com/?p=22

 

[BigTabs]

No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid

On min can you point out where i should be looking its differant to yours well same but info is not there

TMPIN0
TMPIN1 -TMPIN2 not sure why it is there could be the chip itself if you notice lot lower then the others
could be ram sensor but I know for sure TMPIN0 and TMPIN1 are the cpu and mb

lol lol I was right read here HWMonitor TMPIN0, TMPIN1, TMPIN2 « Random ROMs

your a fecking star thank you

 

[ganjiry]

Very nice oc's both I need to save me some pennies..
Have you tried HWiNfo64 for monitoring? HWiNFO64 Download
It maybe different for you but i found HW monitor would give low readings on a lot of my voltage's where hwinfo did'nt. It also has a few other feature's including being able to display any of it's readings in an osd via revertuner in Msi Afterburner if needed.
Whatever works best for you though enit

 

[BigTabs]

Yes tried hwfon still 10less than real readings for me

 

[Solarstarshines]

I have that one sorry didn't mention it earlier