Unable to other PCs in the network

[kedargurjar]

I have 2 desktops using win XP and a laptop on win 7 Home 32 bit. I have a network through ADSL router. My Laptop is visible and accessable to PCs but both PCs are not visible and accessables from LAPtop. Please guide me

 

[prospero]

I have a similar problem. My router is connected via Ethernet to my PC and wirelessly to an HP printer and Raspberry Pi all in the same room.
The router also connects wirelessly to a laptop via a repeater in another room.
The laptop can see all devices on the network, but the PC can only see itself.
All devices show up on the router's GUI (192.168.0.1).
Any ideas would be welcome.

 

[chev65]

I have 2 desktops using win XP and a laptop on win 7 Home 32 bit. I have a network through ADSL router. My Laptop is visible and accessable to PCs but both PCs are not visible and accessables from LAPtop. Please guide me

You need to be using the same "Workgroup" name on all those machines. By default XP uses MSHOME where Windows 7 uses Workgroup as the name for the Workgroup.

You need to change the Workgroup name to match on all machines in this network.

You also need to make sure that network discovery and file and printer sharing is turned on in the Windows 7 machines, go to the Network and Sharing Center then to the Advanced Sharing settings for that.

http://www.sevenforums.com/tutorials/51711-workgroup-name-view-change.html

 

[kedargurjar]

Above steps are already done, my laptop using win7 is visible to PCs using XP but PCs are not visible from Laptop???

 

[Shadowjk]

Above steps are already done, my laptop using win7 is visible to PCs using XP but PCs are not visible from Laptop???

Are you able to ping the XP machines from your laptop?

Open a command prompt window and type the following exactly. Replace {IP Address} with the IP address of the machine that can't be seen

 ping {IP Address}

Once completed please post back the results as this can help determine what could be causing the problem

Many Thanks,
Josh

 

[Shadowjk]

I have a similar problem. My router is connected via Ethernet to my PC and wirelessly to an HP printer and Raspberry Pi all in the same room.
The router also connects wirelessly to a laptop via a repeater in another room.
The laptop can see all devices on the network, but the PC can only see itself.
All devices show up on the router's GUI (192.168.0.1).
Any ideas would be welcome.

With regards to your issue could you please start another thread so that your issue can be resolved separately and removes confusion to guest users who may be viewing this thread through Google.

Many Thanks,
Josh!