BSOD randomly and happening more & more.

[Golden]

Remember to run MemTest86+

 

[Britton30]

Memtest86+ is a very accurate RAM test, if the RAM fails with the test it can, and will, fail when other programs are run too. Running it for a full 8 passes, or more, will flesh out and bad RAM. If you get just one error, that's bad.

 

[sezan1]

Memtest86+ is a very accurate RAM test, if the RAM fails with the test it can, and will, fail when other programs are run too. Running it for a full 8 passes, or more, will flesh out and bad RAM. If you get just one error, that's bad.

Sure thing I will do it for 8+passes. Thanks to all of you for everything so far.

If it does come back clean then whats the other possibilities?

 

[Golden]

Don't preempt the outcome....run the test and post a photo of the results.

 

[sezan1]

Don't preempt the outcome....run the test and post a photo of the results.

My bad, I will do, thanks.

 

[sezan1]

Done memtest86, nothing, what else can it be?
Random freeze/crashes, have to hard reset, error 0x1A shown up on 3 installs, 2with my disc 1 with the guys I bought it online from, so I doubt its my disc, then the whole league of legends, which happened without me installing a single program 0x1A.
Anything to do with bios voltages or that? I'm clueless.

 

[Golden]

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
http://www.sevenforums.com/tutorials/697-system-restore-point-create.html

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
http://www.sevenforums.com/tutorials/69585-safe-mode.html

 

[sezan1]

was just coming online to check and follow steps, went to pass 9 with no errors but got this before I could start verifier etc;


The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff80002e879e3, 0xfffff88009470f60, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 020714-31964-01.

attached dmp, will try above steps.

& desktop just turned off monitor/keyboard, but still power to the mouse edit- no power to mouse lol, I'll try follow steps if it stays on long enough! lol.

Have created restore point and enabled driver verifier, should I disable verifier even if I have to hard reset?; e.g no power to mouse monitor and keyboard?.

 

[sezan1]

Happened during verifier running;

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff80002e8b14f). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: .


Unable to produce a minidump file from the full dump file.
Will try again.

~
This time just got a screen crash, no bsod or anything, everything had lines through it

& no power to keyboard mouse or monitor x3.

gonna sleep will attempt again later.


Edit

Managed to get a blue screen upon startup with driver verifier although no dump again.. and event viewer isn't showing it, think this one was due to verifier running & windows was trying to configure one update.

 

[Golden]

You to run that SeaTools test

 

[sezan1]

You to run that SeaTools test

Are you saying I should run it yea? will attempt to but doubt I'll be able to as I keep getting no harddrive found

 

[sezan1]

Ah yea okay I got this also ~

Error

Event 46, volmgr
Crash dump initialization failed


+System
-Provider[ Name] volmgr
-EventID46[ Qualifiers] 49156
Level2Task0Keywords0x80000000000000-TimeCreated[ SystemTime] 2014-02-07T06:54:22.368424200Z
EventRecordID3446ChannelSystemComputerME-PCSecurity
-EventData
\Device\HarddiskVolume20000000001000000000000002E0004C004100000080000C000000000000000000000000000000000
Binary data:

In Words
0000: 00000000 00000001 00000000 C004002E
0008: 00001004 C0000008 00000000 00000000
0010: 00000000 00000000

In Bytes
0000: 00 00 00 00 01 00 00 00 ........
0008: 00 00 00 00 2E 00 04 C0 .......À
0010: 04 10 00 00 08 00 00 C0 .......À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

 

[Golden]

Recheck the instructions for running SeaTools. Until you have done that, it is pointless doing anything further.

 

[sezan1]

Recheck the instructions for running SeaTools. Until you have done that, it is pointless doing anything further.

Cannot run it, heres whats happening, completely freezes on 0 or 1%;

 

[Britton30]

Does the rotating indicator stop turning? If not, it is still working. Checking a 1TB drive could take 4-5 hours for the long test..

 

[sezan1]

Does the rotating indicator stop turning? If not, it is still working. Checking a 1TB drive could take 4-5 hours for the long test..

Yea it stops turning, I have noticed something, I tried long test this time, didn't move my mouse for the first 30seconds odd, soon as I moved my mouse the same thing happened as in the pictures, complete freeze. Why would this be?

Okay so I disconnected my mouse soon as I hit on start test / done a short test - passed.
Now running a long test.

Long test - passed.

Tried to boot into safe mode ~

heres what I got;

 

[sezan1]

bump, failing mobo?.
seatools passed both short & long, no memory errors with memtest86, still constant bsods.

 

[Britton30]

That seems to be some memory issue and could be RAM, CPU cache, or GPU memory.

In you memtest photo the RAM has a very odd frequency too, 1272?

To better help us to help you would you please add your systems specs? Here's the correct way to do it. :SystemInfo See Your System Specs Under System Manufacturer/Model Number add whether it is a desktop or laptop and whether self built. Very important

Log in to Seven Forums and you will be able to transfer the info directly to the specs page in your profile from within the System Info app.

Your System Specs here.

After doing this your specs will be available in each of your posts.
Click on My system Specs in the lower left of this post to see how it should look.
Full instructions are in the tutorial.

 

[sezan1]

That seems to be some memory issue and could be RAM, CPU cache, or GPU memory.

In you memtest photo the RAM has a very odd frequency too, 1272?

To better help us to help you would you please add your systems specs? Here's the correct way to do it. :SystemInfo See Your System Specs Under System Manufacturer/Model Number add whether it is a desktop or laptop and whether self built. Very important

Log in to Seven Forums and you will be able to transfer the info directly to the specs page in your profile from within the System Info app.

Your System Specs here.

After doing this your specs will be available in each of your posts.
Click on My system Specs in the lower left of this post to see how it should look.
Full instructions are in the tutorial.

I'm afraid I cannot do this, I tried multiple times to get online but computer just turned the keyboard mouse and monitor off x3.
So I went into safe mode then got stop: 0x000000A then I rebooted hard reset as usual; and now the computer won't boot up at all, well no power to mouse/keyboard or monitor, no matter how many times I try. Although my computer at the top showing where its 'doing something' like processing is flashing as usual. Tried about 8times now, still no power to keyboard mouse or monitor.


Finally its back on, updated. & appears I got a dmp file, will attach.

new BSOD upon bootup after mouse,keyboard and monitor turned off, will attach images

 

[Britton30]

I've asked for help here. Can you manage full pics of screens when you take them?