Win 7 BSOD Help w/minidump files

[GeepKnee]

Here are the two latest minidump files
Thanks Matt

 

[zigzag3143]

Here are the two latest minidump files
Thanks Matt

Both dumps were hardware issues. bugcheck 124 is hardware possibly memory, and the other dump didnt contain much info. It wasnt useful for too much other than to tell that there was a memory problem

I suggest

download and run memtest x86 overnight
run a system file check on your system files to verify and fix them
to run type cmd in search>right click and run as admin>sfc /scannow

Let us know the results

Ken J

 

[GeepKnee]

I will run Memtest for about 12 or more hours tonight and post results tonight
thanks

 

[chev65]

According to everything I've read about your board and memory, you may need as much as 1.4 volts for QPI/DRAM voltage to get it stable, yes even if you aren't overclocking. Memory needs to be set 1.65, XMP shows 8 8 8 24 at 1600MHz.

Source Corsair forums and your board.

http://forum.corsair.com/forums/showthread.php?t=78526

 

[GeepKnee]

Thanks to everyone. Chev65 thanks for the info about the voltages. Increased memvolt to 1.60 and QPI/DRAM volt to 1.3875 so far no lock-ups or BSOD. Hope I have everything fixed.
Thanks Matt

 

[torrentg]

Nice one Chev. +1

 

[chev65]

Thanks to everyone. Chev65 thanks for the info about the voltages. Increased memvolt to 1.60 and QPI/DRAM volt to 1.3875 so far no lock-ups or BSOD. Hope I have everything fixed.
Thanks Matt

Thanks for Rep once again Torrentg.

I'am glad the adjustments helped you out GeepKnee. Those Corsair forums come in handy for this type of stuff.