a request to this de device has been cancelled

[amoretam]

....stuck at 28% , it says correcting error in index $130 for file 370747
Sorting index $130 in file 370749

It is the same it's been saying everytime I run chkdsk since the problem began yesterday....

 

[amoretam]

....stuck at 28% , it says correcting error in index $130 for file 370747
Sorting index $130 in file 370749

It is the same it's been saying everytime I run chkdsk since the problem began yesterday....

.....still running at 30%
Recovering orphaned file switch2.png (2985) into directory file 2961.

I am thinking about cancelling , my hdd is very hot! and sounds like a clock..

do you think that this unindexed problem has something to do with indexing , I mean should I disable indexing on this drive?

thanks

 

[F5ing]

Cancel it. That sound you're hearing could be a bad sign (is it clicking?); like the drive is having a hard time positioning the heads to the proper location and instead is rapidly seeking (hitting the spindle then back out to the parking mechanism).

You should've been able to see SMART results with the WD software if it was connected directly to the motherboard.

 

[amoretam]

Cancel it. That sound you're hearing could be a bad sign (is it clicking?); like the drive is having a hard time positioning the heads to the proper location and instead is rapidly seeking (hitting the spindle then back out to the parking mechanism).

You should've been able to see SMART results with the WD software if it was connected directly to the motherboard.

cancelled

yes it was clicking ,
there is no results, it just said PASS

 

[F5ing]

Did it cool down and stop clicking?

Run the WD program again and click on the blue PASS. Post the screenshot. SMART isn't perfect as it basically just reports Pass/Warn/Fail as a final result, but it does monitor a bunch of stuff in order to do so.

 

[amoretam]

Cancel it. That sound you're hearing could be a bad sign (is it clicking?); like the drive is having a hard time positioning the heads to the proper location and instead is rapidly seeking (hitting the spindle then back out to the parking mechanism).

You should've been able to see SMART results with the WD software if it was connected directly to the motherboard.

cancelled

yes it was clicking ,
there is no results, it just said PASS

after I cancelled and try to boot chkdsk ran again but this time it passed beyond 73% very fast and a lot of recovering orphaned files and right now is Corrrecting errors in the Master File Table (MTF) mirror... it has like 7 minutes there

 

[amoretam]

it is not clicking right now while it corrects the MFT

should I let it do its thing??

 

[amoretam]

Cancel it. That sound you're hearing could be a bad sign (is it clicking?); like the drive is having a hard time positioning the heads to the proper location and instead is rapidly seeking (hitting the spindle then back out to the parking mechanism).

You should've been able to see SMART results with the WD software if it was connected directly to the motherboard.

cancelled

yes it was clicking ,
there is no results, it just said PASS

after I cancelled and try to boot chkdsk ran again but this time it passed beyond 73% very fast and a lot of recovering orphaned files and right now is Corrrecting errors in the Master File Table (MTF) mirror... it has like 7 minutes there

computer booted, thanks god right now I have accces to the data in the disk, but disk is unresponsive..

The old message A requiest to this device has been cancelled is in Event Viewer. lots of them

I cant find wininit or chkdsk in event viewer..

 

[amoretam]

cancelled

yes it was clicking ,
there is no results, it just said PASS

after I cancelled and try to boot chkdsk ran again but this time it passed beyond 73% very fast and a lot of recovering orphaned files and right now is Corrrecting errors in the Master File Table (MTF) mirror... it has like 7 minutes there

computer booted, thanks god right now I have accces to the data in the disk, but disk is unresponsive..

The old message A requiest to this device has been cancelled is in Event Viewer. lots of them

I cant find wininit or chkdsk in event viewer..

.............also i have no blue pass in data lifeguard..

when i click to view smart data a popup says: SMART disk info is NOT available for this drive or inaccesable by this program

 

[F5ing]

Don't reboot again (at least for the time being) until we see if we should reset that dirty bit.

Check out post #25 (I think you may have missed it).

When I get a disk like this from someone the first thing I do is clone it to another drive. That way I've always got a copy of it in case something goes wrong with the testing/fixing of the original.

 

[F5ing]

Check out post #25 (I think you may have missed it).

.............also i have no blue pass in data lifeguard..

when i click to view smart data a popup says: SMART disk info is NOT available for this drive or inaccesable by this program

I see you did see post #25.

When you ran WD app, was the drive connected via USB or SATA?

 

[amoretam]

Don't reboot again (at least for the time being) until we see if we should reset that dirty bit.

Check out post #25 (I think you may have missed it).

When I get a disk like this from someone the first thing I do is clone it to another drive. That way I've always got a copy of it in case something goes wrong with the testing/fixing of the original.

yes I read post 25 and replied..

one problem is that I dont have another HDD right now... my data in the disk does not look bad thought

 

[amoretam]

Check out post #25 (I think you may have missed it).

.............also i have no blue pass in data lifeguard..

when i click to view smart data a popup says: SMART disk info is NOT available for this drive or inaccesable by this program

I see you did see post #25.

When you ran WD app, was the drive connected via USB or SATA?

via sata

 

[F5ing]

I checked the specs for that drive at the WD website. When connected via SATA you should have access to SMART data, unless the SATA port you're connected to is managed by a RAID controller or something like that.

Do you know if the board has something like RAID?

 

[amoretam]

I checked the specs for that drive at the WD website. When connected via SATA you should have access to SMART data, unless the SATA port you're connected to is managed by a RAID controller or something like that.

Do you know if the board has something like RAID?

nop, i mean i have never used that....hdd is connected to sata port 2

 

[F5ing]

Some boards have RAID built in, even if you don't utilize it. Whether you use it or not, if it has that feature it will block WD app from retrieving SMART data. What kind of msgs did WD have for your other drives?

Also beginning to wonder about SATA port and cable issues. But then again, you even ran into problems when you were connected via the USB adapter.

 

[amoretam]

Some boards have RAID built in, even if you don't utilize it. Whether you use it or not, if it has that feature it will block WD app from retrieving SMART data. What kind of msgs did WD have for your other drives?

Also beginning to wonder about SATA port and cable issues. But then again, you even ran into problems when you were connected via the USB adapter.

I have 3 WD caviar black in my system an none of them have this SMART feature..

 

[F5ing]

I have 3 WD caviar black in my system an none of them have this SMART feature..

Most every drive has it, and it's almost always turned on by default.

Just checked specs on your board; it's RAID capable (if I got the right board). Check out this link:

NVIDIA nForce 750i SLI MCP

Go through the manual for it to see how to access it. When you gain access to it it will likely have a way to check SMART (I think the RAID firmware actually uses data from SMART in managing the drives connected to it).

 

[amoretam]

I have 3 WD caviar black in my system an none of them have this SMART feature..

Most every drive has it, and it's almost always turned on by default.

Just checked specs on your board; it's RAID capable (if I got the right board). Check out this link:

NVIDIA nForce 750i SLI MCP

Go through the manual for it to see how to access it. When you gain access to it it will likely have a way to check SMART (I think the RAID firmware actually uses data from SMART in managing the drives connected to it).

hey thanks for your time

my mobo is this:XFX nForce 750i SLI Motherboard Review :: nForce 750i SLI Features :: Motherboards.org

I still dont know if it is raid capable,

 

[F5ing]

It mentions RAID in both my link and yours. Do you have the manual for the board?