ATI Mobilty Radeon 300X Catalyst!!

[Kayyali101]

I am working on Dell Inspiron 6000 Laptop and I Installed Win 7 Fully Activated and working well. Windows Update downloads the graphics card as shown below:

and when I was searhing for Catalyst for My Graphic driver I found this on ATI Support Page:

But on Dell Support Screen They only give support for WindowsXP:

If there is anyone who would give me some help and I will be very grateful.

 

[Bare Foot Kid]

Hello Kayyali101, welcome to Se7en Forums!

If you're asking about installation, have you tried installing it in Compatibility Mode?

Keep us informed!

EDIT: I also just found this tutorial.... http://www.sevenforums.com/tutorials/659-install-application-correctly-windows-7-a.html?ltr=I












Later :shock: Ted

 

[NormCameron]

I am working on Dell Inspiron 6000 Laptop and I Installed Win 7 Fully Activated and working well. Windows Update downloads the graphics card as shown below:

and when I was searhing for Catalyst for My Graphic driver I found this on ATI Support Page:

But on Dell Support Screen They only give support for WindowsXP:

If there is anyone who would give me some help and I will be very grateful.

The ATI Mobility x300 is not supported under x64. Ther is however a Vista 32 bit driver here

Drivers & Tools | GAME.AMD.COM

Norm

 

[Kayyali101]

The driver was Automatically installed via Windows Update, the picture below from my windows update history :

 

[NormCameron]

The driver was Automatically installed via Windows Update, the picture below from my windows update history :

That may well be the case. More systems have been screwed up by updated video drivers via Windows Updates than I've had hot dinners. Download the correct one from the link I gave you. Uninstall the Windows Update one and reinstall the correct driver.

Norm

 

[Kayyali101]

I thank u Mr. Norm for help, but nothing happend from installing the driver and Catalyst from the ling u gave me, I first uninstalled the driver from the device manger then I excute the 8-12_vista32_dd_ccc_wdm_enu_72275.exe that I downloaded but nothing happened.

when I reboot, Windows installed the driver automaticly so the prob of the driver is as follow:

I won't lose hope, not this time. and I hope that you will keep on supporting me.

I deeply appreciate your help. thank u again Mr. Norm

 

[LUCstu88]

You stated you are using a Dell Inspiron 6000. I just installed windows 7 on the same model but am having trouble finding an audio driver that will work, the audio card is a Sigmatel STAC 975X AC97. I am hoping that you will have a solution or a driver that works that i can install.

Thanks

 

[SmashDML]

looking for the sigmatel drivers also. Anyone?

 

[Davewall104]

I have the Sigmatel Audio drivers. I'm actually using the old drivers that were for XP, and they work just fine. If you give me a minute i'll post em on the board (or upload to somewhere and then link ya)

View attachment audio.zip

there. audio drivers for Sigmatel Major-C (or whatever)


Oh, and on the original subject, i disagree. I find that the drivers that i have gotten in Win7 Update are accurate, and typically better. (except for certain things where there is a specific driver that just happens to work better with a program, like the GTAIV driver issues). So I'd use those, if i were you.

 

[SmashDML]

tnx! gonna install and report back

 

[ikilledkenny]

Run the drivers in compatibility mode. Hopefully, that will work.

 

[Davewall104]

No Compat. Mode

I couldn't say for sure, as i dont have access to that computer anymore, but i dont remember having to install in compatibility mode.

 

[ikilledkenny]

Well, when you do have access to it, run it in compatibility mode for Vista (or XP, depending on which one you downloaded it).

 

[SmashDML]

tnx! drivers work

 

[ikilledkenny]

Your welcome! Glad I could help you!

 

[Davewall104]

Welcome

your welcome, Smash. Good luck with Windows 7!

 

[Matthew]

I was able to get RC 7100 to somewhat detect my X300 correctly and run Aero with a score of 2.0 (at one point it was 3.4??!!). Here's what I did:

1. Download Mobility Modder.

2. Download Catalyst 8.12. Extract the drivers, but don't install. Just cancel after extraction.

3. Run Mobility Modder as the instructions on the page says. Click the 'Disable UAC' checkbox. Your laptop will restart, and Mobility Modder will open automatically.

4. Browse to the extraction location and click Modify.

5. Once it's done install the drivers. You should get a message that tells you the drivers are not compatible or signed, but install anyway.

6. A message should pop up telling you to restart. After that run WEI, and it should be able to detect you card.

You may be able to do this with newer drivers. I tried with 9.3 or 9.4, but it didn't work. I have a Dell Inspiron 6000 just like you. Hope this helps.

 

[FinalCylon]

I tried Dell x300 drivers for XP in compatibility mode and also Mobility Modder + Omega drivers on a clean Windows 7 install, but neither worked well with x264 playback (CCCP+CoreAVC usually, though I tried other options.) Subsequently, I did pretty well by clean-installing Vista, accepting the Windows Update ATI drivers (twice), and then upgrade-installing Windows 7 (7100). I have a Dell Inspiron 6000 with ATI x300 64MB (32MB dedicated.) WEI is 2.0. Aero is slow, so I turned it off.

Although I'm satisfied now, my major remaining complaint is some tearing in x264 playback on high motion scenes. I was thinking of retreating to Windows XP to fix that, but it seems this was a bug in the ATI 9.2 Catalyst drivers and so maybe eventually there will be a Windows Update version to fix it. I'm not sure what ATI Catalyst version these Windows Update drivers correspond to, but they are listed as driver 8.360.0.0 date 3/14/2007.

Also, Windows Media Center does not work; full screen gives a black screen.

Anyone got x264 without tearing or Media Center working in Windows 7 with an Inspiron 6000?

 

[Mikaelft]

Working with Win 7 ?

Does anyone got Radeon X300 to work with Windows 7 ?
I have installed mobilitymodder and modified the newest ATI Catalyst. But it won't work I get error code 43 after reboot.

 

[FinalCylon]

I fixed my problem with tearing on 720p mkv playback. I had Aero disabled, and it turns out that if you have Aero disabled in Windows 7 or Vista, then it also disables EVR, and you get tearing as a result. I get some dropped frames now, but I much prefer dropped frames over tearing. Phew, I was just about to revert to XP, but now mkv's look beautiful under Windows 7 on my Inspiron 6000.

@Mikaelft: Yeah, everybody else got the Radeon X300 to work with Windows 7. Didn't you try the Windows Update drivers? But for mobiltymodder, there's a new ATI Catalyst out in the last few days, and I installed that fine. (It didn't work with the version around June, which is now a known bug.)