Autocad 2010 Crashes arbitrarily on Windows 7
- Thread starter smarty7
- Start date
It should be compatible with Windows 7 32-bit.
Have you tried re-installing the program? Updating graphics drivers?
Have you tried re-installing the program? Updating graphics drivers?
My Computer
- Computer type
- PC/Desktop
- Computer Manufacturer/Model Number
- Custom Built
- OS
- Windows 7 Ultimate x64
- CPU
- Intel(R) Core(TM) 2 Quad Q8200 @ 2.33 GHz
- Motherboard
- Asus P5KPL-AM SE Motherboard
- Memory
- 2x2GB Kingston DDR2
- Graphics Card(s)
- 1GB AMD Radeon HD 5450
- Sound Card
- VIA Technologies High Definition Audio Device
- Monitor(s) Displays
- Samsung SyncMaster 733NW
- Screen Resolution
- 1440x900
- Hard Drives
- SEAGATE 320GB Barracuda® 7200.12, SATA 3 Gb/s, 7200 RPM, 16MB cache x 2
- Case
- Custom Casing
- Cooling
- Ice cubes from the freezer ;)
- Keyboard
- Generic Plug & Play Keyboard
- Mouse
- Optical Mouse
- Internet Speed
- Very slow
Yes it is compatible with Windows 7.
I have tried every option possible which the uninstaller of autocad shows, reinstall, uninstall, last time i even deleted autodesk's folder from program files after uninstall and then install it fresh. But the problem seems to persists.
I just now checked, it seems graphic driver is up to date.
My Computer
- OS
- Windows 7 Ultimate 32bit
My Computer
- Computer type
- PC/Desktop
- Computer Manufacturer/Model Number
- Custom Built
- OS
- Windows 7 Ultimate x64
- CPU
- Intel(R) Core(TM) 2 Quad Q8200 @ 2.33 GHz
- Motherboard
- Asus P5KPL-AM SE Motherboard
- Memory
- 2x2GB Kingston DDR2
- Graphics Card(s)
- 1GB AMD Radeon HD 5450
- Sound Card
- VIA Technologies High Definition Audio Device
- Monitor(s) Displays
- Samsung SyncMaster 733NW
- Screen Resolution
- 1440x900
- Hard Drives
- SEAGATE 320GB Barracuda® 7200.12, SATA 3 Gb/s, 7200 RPM, 16MB cache x 2
- Case
- Custom Casing
- Cooling
- Ice cubes from the freezer ;)
- Keyboard
- Generic Plug & Play Keyboard
- Mouse
- Optical Mouse
- Internet Speed
- Very slow
uh
okay i did what it said. Deleted all the remaining autocad files. Installed it again. It went good for about 20 minutes and crashed again, with windows message "This program has stopped working".My Computer
- OS
- Windows 7 Ultimate 32bit
update: it seems the crashes are .net issue and not Autodesk's fault. Downloading the lastest .net framework 4 should work, or check compatibility of graphic card here Autodesk - AutoCAD Services & Support - Graphics Hardware List
My Computer
- OS
- Windows 7 Ultimate 32bit
I got the same problem too,
I've already used .net framework 4, and before I install Autocad 2010, I've install Autocad LT 2015, and it works properly without this error.
*I go back to 2010 cause I need 3d tool and Autocad 2015 is not available for my country.
I've already used .net framework 4, and before I install Autocad 2010, I've install Autocad LT 2015, and it works properly without this error.
*I go back to 2010 cause I need 3d tool and Autocad 2015 is not available for my country.
My Computer
- Computer type
- PC/Desktop
- OS
- Windows 7 Ultimate 32bit
Similar threads
