Blue screen of death while gaming. Several Error codes.

[Eldridgo]

Hi,

I have no idea what I need to show you so if you just comment what you need and how I get to there on my computer.

One error message is; SYSTEM_SERVICE_EXCEPTION

Another one is; A clock interrupt was not received on a secondary processor within the allocated time interval.

*** STOP: 0x00000101 (0x00000000000000031, 0x000000000000000 0xFFFFF882FD7180 0x0000000000000003)

Another one is *** STOP: 0x0000001E

I can't seem to upload my most recent dump file, it say contact the admin ( which I am or the file owner, which I also am..) so i don't know about that.

Thanks in advance.

 

[Golden]

More information is required.

1. Download this .BAT file to your desktop
2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.


Download

 

[YoYo155]

Welcome to SF Eldridgo, please follow the http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html .

Seeing how you have a variety of bugcheck codes starting with testing the RAM
is not a bad idea.

:ar: Testing the RAM:

Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• :info: Pay close attention to part 3 of the tutorial "If you have errors"
• :tip: Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

When done with the testing procedure take a picture and upload it here.

:ar: This will help you to determine where the issue is origination from (if any):

First run it with all the existing/installed RAM modules. If it comes with no error, all is good.

But if it starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.

 

[Eldridgo]

Hi, have added what I think is what you need.

Let me know if I can do anything else, will do the RAM checks now.

 

[Eldridgo]

More information I think is needed.

 

[Golden]

fffff880`090c09b8  fffff880`03d7514bUnable to load image \??\C:\Windows\system32\drivers\[COLOR="red"]aswSP.sys[/COLOR], Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSP.sys
 aswSP+0xb14b
fffff880`090c09c0  00000000`00000202
fffff880`090c09c8  fffff800`034cb22a nt!KiDeferredReadyThread+0x31a
fffff880`090c09d0  fffff880`009ea180
fffff880`090c09d8  fffffa80`06a29450
fffff880`090c09e0  fffffa80`069aba40
fffff880`090c09e8  fffff880`03aed260Unable to load image \??\C:\Windows\system32\drivers\[COLOR="Red"]aswSnx.sys[/COLOR], Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
 aswSnx+0x29260

Host Name:                 THEBEAST-PC
OS Name:                   Microsoft Windows 7 Ultimate 
OS Version:                6.1.7601 Service Pack 1 Build 7601
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Standalone Workstation
OS Build Type:             Multiprocessor Free
Registered Owner:          Tom
Registered Organization:   
Product ID:                [COLOR="red"]00426-OEM-8992662-00006[/COLOR]
Original Install Date:     19/07/2012, 16:48:01
System Boot Time:          25/01/2014, 22:39:16
System Manufacturer:       Gigabyte Technology Co., Ltd.
System Model:              [COLOR="red"]GA-78LMT-S2P[/COLOR]

Uninstall Avast - purchase and install a genuine Windows 7 - then install FREE MSE.

Counterfeit installations make the installation behave in unexpected ways and can mask the true cause of BSOD's, making them difficult to solve. Many analysts won't attempt to diagnose BSOD's on these installations because of this.