Blue Screen While Projecting

[toddddddd]

Hello. Thanks in advance for any suggestions.

I've had three BSODs in the past week, I believe all were while projecting to an Epson projector. Previously had no problems.

I've attached my dump files as instructed. Thanks again.

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchDdiNotifyDpc+a )

Followup: MachineOwner
---------

0: kd> lmvm igdkmd64
start             end                 module name
fffff880`05a0d000 fffff880`065ca660   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        Sat Oct 22 03:59:55 [B][COLOR="Red"]2011[/COLOR][/B] (4EA1AC13)
    CheckSum:         00BC8CF3
    ImageSize:        00BBD660
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Try updating the very old Intel graphics driver from here:
https://downloadcenter.intel.com/

 

[toddddddd]

Thank you. I always knew the FSM was looking out for me. I will give that a try and then try again with the activity that seemed to blow things up (Kahoot). Thanks!

 

[Golden]

May you be touched by His Noodley Appendage!