BSOD 0x0000001e and 0x0000000a

My SSD and HDD are ok also, after running the recommended check all day. I still have not found information how to get my PC to write minidumps or, for that matter, any kind of dump files again. I have a similar number cruncher PC that also no longer writes dump files on BSODs. Most peculiar. I have spend so many hours on finding out how to re-enable minidump writing; there must be some specialist knowledge available somewhere? But where? Anybody knows?

I don't want to buy a new processor if it is the mainboard. I don't want to buy a new mainboard if it is the memory. Maybe processor, mainboard and memory are all faulty?

What should I do now (apart from updating the 7 non-Microsoft drivers)?

While updating Intel drivers, I got an "uncorrectable hardware error 0x124" BSOD and, for whatever reason, a minidump was written! Would you Adam and Eve it? Were all other blue screens a too light shade of blue? Anyway, I ran SF again and attached the zipped folder here.

Thanks for taking a peek!

A couple of new blue screens, but no minidumps again. What is going on here?
 
Last edited:

My Computer My Computer

At a glance

Microsoft Windows 7 Professional 64-Bit 7601 ...Intel(R) Core(TM) i7-3930K CPU @ 3.20 Steppin...Kingston KHX1600C9D3K4/16GX 16 GB DDR3 9-9-9-27AMD FirePro V4900 (FireGL V)
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom build 01/06/2012, rebuilt 10/24/2014
OS
Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
CPU
Intel(R) Core(TM) i7-3930K CPU @ 3.20 Stepping 6 Revision C1
Motherboard
ASUSTeK COMPUTER INC. P9X79 BIOS 4608
Memory
Kingston KHX1600C9D3K4/16GX 16 GB DDR3 9-9-9-27
Graphics Card(s)
AMD FirePro V4900 (FireGL V)
Sound Card
(1) AMD High Definition Audio Device (2) Realtek High Defini
Monitor(s) Displays
HP LP2475w
Screen Resolution
1920 x 1200
Hard Drives
(1) ATA SAMSUNG HD204UI SCSI Disk Device
(2) ATA SAMSUNG SSD 830 SCSI Disk Device
PSU
CORSAIR HX650W
Case
fractal design DEFINE R4
Cooling
Noctua NH-D14 SE2011 and 2 x NF-A14 PWM
Keyboard
FILCO Majestouch 2 Ninja
Antivirus
Microsoft Security Essentials
Browser
IE11
Other Info
TP-LINK 150Mbps-Wireless-N-PCI-Adapter TL-WN751ND
Six days, but no joy; not even in safe mode with network drivers. Again, no minidump files are written to disk when a BSOD occurs (apart from that single instance described in the above post with the latest SF folder attached).

Memory? Processor? Mainboard?

After spending all that time without getting anywhere - should I flash the BIOS and then reinstall Windows 7 with updates plus only the simulation software and see what happens?

However, if I then receive the same BSODs as before, what should I do? Buy new memory, processor, mainboard? A new PC?
 

My Computer My Computer

At a glance

Microsoft Windows 7 Professional 64-Bit 7601 ...Intel(R) Core(TM) i7-3930K CPU @ 3.20 Steppin...Kingston KHX1600C9D3K4/16GX 16 GB DDR3 9-9-9-27AMD FirePro V4900 (FireGL V)
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom build 01/06/2012, rebuilt 10/24/2014
OS
Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
CPU
Intel(R) Core(TM) i7-3930K CPU @ 3.20 Stepping 6 Revision C1
Motherboard
ASUSTeK COMPUTER INC. P9X79 BIOS 4608
Memory
Kingston KHX1600C9D3K4/16GX 16 GB DDR3 9-9-9-27
Graphics Card(s)
AMD FirePro V4900 (FireGL V)
Sound Card
(1) AMD High Definition Audio Device (2) Realtek High Defini
Monitor(s) Displays
HP LP2475w
Screen Resolution
1920 x 1200
Hard Drives
(1) ATA SAMSUNG HD204UI SCSI Disk Device
(2) ATA SAMSUNG SSD 830 SCSI Disk Device
PSU
CORSAIR HX650W
Case
fractal design DEFINE R4
Cooling
Noctua NH-D14 SE2011 and 2 x NF-A14 PWM
Keyboard
FILCO Majestouch 2 Ninja
Antivirus
Microsoft Security Essentials
Browser
IE11
Other Info
TP-LINK 150Mbps-Wireless-N-PCI-Adapter TL-WN751ND
I had enough. I need the multi-threaded computing power for my simulations.

I flashed the BIOS, installed new memory (taken from a working PC clone), reinstalled Windows 7 Professional, the latest drivers as per the device manager - and then reinstalled my simulation software; nothing else.

Let's see how this goes. If it doesn't, I vent my frustration in a new thread ; )

I have to open a new thread : (
 
Last edited:

My Computer My Computer

At a glance

Microsoft Windows 7 Professional 64-Bit 7601 ...Intel(R) Core(TM) i7-3930K CPU @ 3.20 Steppin...Kingston KHX1600C9D3K4/16GX 16 GB DDR3 9-9-9-27AMD FirePro V4900 (FireGL V)
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom build 01/06/2012, rebuilt 10/24/2014
OS
Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
CPU
Intel(R) Core(TM) i7-3930K CPU @ 3.20 Stepping 6 Revision C1
Motherboard
ASUSTeK COMPUTER INC. P9X79 BIOS 4608
Memory
Kingston KHX1600C9D3K4/16GX 16 GB DDR3 9-9-9-27
Graphics Card(s)
AMD FirePro V4900 (FireGL V)
Sound Card
(1) AMD High Definition Audio Device (2) Realtek High Defini
Monitor(s) Displays
HP LP2475w
Screen Resolution
1920 x 1200
Hard Drives
(1) ATA SAMSUNG HD204UI SCSI Disk Device
(2) ATA SAMSUNG SSD 830 SCSI Disk Device
PSU
CORSAIR HX650W
Case
fractal design DEFINE R4
Cooling
Noctua NH-D14 SE2011 and 2 x NF-A14 PWM
Keyboard
FILCO Majestouch 2 Ninja
Antivirus
Microsoft Security Essentials
Browser
IE11
Other Info
TP-LINK 150Mbps-Wireless-N-PCI-Adapter TL-WN751ND
Back
Top