BSOD 0x00000124 playing games

[DielsAlder]

Hello-

I would love to get some assistance with my recent BSOD issues (I have recently starting seeing them while playing WoW). It can happen anywhere between 5 minutes to hours into playing. My computer is a custom build, no overclocking, and has been stable since I built it (2 months). I have made no recent hardware or software changes.

MB: AsRock Z77 Extreme 4 LGA1155
CPU: Intel i5 2500k
RAM: GSkills Ripjaw DDR3 1600
GPU: Nvidia GTX 650 Ti

I've attached my SF zip file. Please let me know what addition information I can provide.

Thank you!

 

[DielsAlder]

Update: I am still getting BSOD 0x124 after trying the following:

1. Ran Memtest86 for 12 hours, no errors.
2. Ran a torture test, all internal temps never rose above 55C.
3. Updated GPU, USB, SATA and audio drivers.

I've also attached the last two minidump files.

Any help would be very much appreciated! Thanks!

Edit:
Ran msched, which found no issues.

I also tried updating my BIOS (from 2.80 to 2.90), and the system become more unstable - I could no longer load windows normally (could only load in safe mode). I have reverted back to 2.80 and can now boot normally again.

Not sure what to try next.

 

[DielsAlder]

Update:

1. I've re-seated all hardware, re-made all connections, and thoroughly cleaned all components.
2. Run SFC /scannow, no issues.
3. Downloaded driver update utility and updated all drivers.
4. Ran a registry cleaner.

Using a bluescreen viewer, the crashes appear to be caused by driver hal.dll (crash address ntoskrnl.exe)

The system is still only stable in Safe mode (with networking).

Thanks for your time.

 

[x BlueRobot]

[COLOR=Red]BugCheck 124[/COLOR], {[COLOR=Blue]0[/COLOR], [COLOR=SeaGreen]fffffa8007b25028[/COLOR], b2000000, 30005}

Probably caused by : GenuineIntel

1: kd> [COLOR=SeaGreen]!errrec fffffa8007b25028[/COLOR]
===============================================================================
Common Platform Error Record @ fffffa8007b25028
-------------------------------------------------------------------------------
Record Id     : 01cec0983c1341a2
Severity      : Fatal (1)
Length        : 864
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 10/4/2013 0:36:21 (UTC)
Flags         : 0x00000000

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007b250a8
Section       @ fffffa8007b25180
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : Micro-Architectural Error
Flags         : 0x00
CPU Version   : 0x00000000000206a7
Processor ID  : 0x0000000000000002

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007b250f0
Section       @ fffffa8007b25240
Offset        : 536
Length        : 64
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000002
CPU Id        : a7 06 02 00 00 08 10 02 - bf e3 9a 1f ff fb eb bf
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007b25138
Section       @ fffffa8007b25280
Offset        : 600
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : [COLOR=Red]Unknown (Proc 1 Bank 0)[/COLOR] <-- Possibly not publicly documented by Intel
  Status      : 0xb200000000030005

Run the Small FFT's, Large FFT's and Blend Test for a few hours each. Do not let the temperature exceed 80*C.

• http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

Enable "Round off checking" before the test (see first post below tutorial).