BSOD 1000007e on boot up. Not sure what else to do!

[JonD83]

Hello. I was recently booting up but my machine (fairly new build) would not go into windows. After doing a hard reset it booted no problem. The error report said it was error 1000007e. I've had this issue once or twice in the past but it never gave me a detailed error report like it did this time. I thought I had fixed it when I realized my Mobo did not set my Ram timings correctly and set them properly. Havnt had an issue since until today. I tested my ram with memtest for 8 hours just last week and received no errors. All of my drivers are up to date as far as I know. Ran both an Avast boot scan and a Malwarebytes scan with no viruses found. My temps are well within reason also. Any help at all I would greatly appreciate. Thanks so much for taking the time.

 

[Arc]

BugCheck 1000007E, {ffffffffc0000005, fffff88005f4df6b, fffff880021a2758, fffff880021a1fb0}

[COLOR=Red]Probably caused by : nvlddmkm.sys[/COLOR] ( nvlddmkm+8cdf6b )

Followup: MachineOwner
---------

This one blames the display. That is either the graphics card or the display driver.

It would be better to wait and see how things go after the steps taken by you. If you face any further BSOD, let us see the dumps. We will try to troubleshot it.

 

[JonD83]

Interesting find! Thanks a lot for your insight. I'll keep an eye on it and let you know.

 

[JonD83]

So I've had another BSOD while booting up. Windows started loading then the screen went black. I got what sounded like 2 quick short beeps from my Mobo which is a memory issue if I heard it correctly and am interrupting that right. I've uploaded the newest reports. The error message this time was:

EventData

BugcheckCode 126

BugcheckParameter1 0xffffffffc0000005

BugcheckParameter2 0xfffff880118eef6b

BugcheckParameter3 0xfffff88003369758

BugcheckParameter4 0xfffff88003368fb0

SleepInProgress false

PowerButtonTimestamp 0

 

[Arc]

Though no crash dump saved this time, but it is indicating to a memory issue.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus (you may keep Rainmeter and DisplayFusion too).
5. Apply > OK
6. Accept then restart.

Let the computer run in this situation.

Also test your RAM modules for possible errors.

How to Test and Diagnose RAM Issues with Memtest86+
​

Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result.

 

[JonD83]

Will do thanks a lot. Last night I ran Memtest for 8 passes with one of my two sticks in (in slot 2) and it passed with 0 errors. Tonight I'll try my other stick in slot 4 (where it usually resides) and see what happens. I'll let you how it goes and I really appreciate all the help. You're awesome.