BSOD 124 0x00000124

[kaspa]

I have run out of options.. Quick ref to what I have done

-Fresh Install of WIndows7
-Bought another GPU
-Memtest
-Updated drivers
-CPU Stress Test
-GPU Stress Test

BSOD use to only happen when playing Eve Online and now its gone to random times with no stress on computer or me not even on the computer doing anything with everything closed. Computer has passed Memtest several times. CPU/GPU stress test is a hit or miss. I am now lost, I had RMA'd the GPU because I thought that was it. ASUS sent it back and said it was fine. While in RMA I bought a cheap GPU and had BSOD with that as well. Any help or input would be most grateful.

 

[Skylais]

This link has the most probably solutions to your problem. BUGCHECK_STR: 0x124_AuthenticAMD =
http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

If you have overclocked Stop and revert! This and check for Dust and Dirt. These seem to be the most probable causes. As well if the problem continues, i suggest to lower the vcore settings a tiny bit.


Try this test : General hardware: http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html ( (Three pre-set configurations are available: Small FFTs and In-place FFTs, and Blend. Small and In-place modes primarily test the FPU and the caches of the CPU, whereas the Blend mode tests everything, including the memory.)

 

[kaspa]

No over cloaking. Don't believe cooling is a problem (4 fans on case). I've only updated the GPU drivers, do you want me to do them all?? Updated BIOS yesterday. I also re-installed windows 7 two days ago. Ran Prime:

Small - BSOD
In-Place - Good
Blend - Good.

Only waited till CPU hit 53C which the fire was on.

 

[kaspa]

More help would be greatly appreciated. I am willing to try anything to fix this problem.

 

[Skylais]

No over cloaking. Don't believe cooling is a problem (4 fans on case). I've only updated the GPU drivers, do you want me to do them all?? Updated BIOS yesterday. I also re-installed windows 7 two days ago. Ran Prime:

Small - BSOD
In-Place - Good
Blend - Good.

Only waited till CPU hit 53C which the fire was on.

Was the BSOD you got from this, the same 1024 code?

If so this is most likely a hardware issue. Almost all of them are, even if perhaps you completely reset your pc it would occur again most likely in another 2 weeks or so.
I would love for you to update all of your devices drivers, it is a possible problem.

 

[kaspa]

I did the windows update. My NIC and monitors were on the list. I would BSOD and had to end up just clicking on the driver updates to get those with nothing else checked. After those updates I tried to do the rest of the windows update with a BSOD.

How can I confirm that all my drivers are up-to-date?

It is really a hit or miss with the BSOD, I never know when it is coming.

I've reuploaded a new dump of the BSOD. Hopefully there is something you can have me do to fix this. I have an old computer I can use in case things go south and I can keep you updated.

 

[Skylais]

This is assuming your system specs are up to date.
At this website for your MOBO : run the one labeled " model automnatic detection " *Will need java to run*
ASUS Service for North America
or if this is correct
ASUS - Motherboards- ASUS M4A79T Deluxe
The previous links and instructions should guide you to your driver page where you can install the latest drivers if needed.
Take note the wireless card driver is in "Beta" mode. Which u said u tried updating the Network card, correct? If so this may be our problem and the links above you can check with.
7.003.0213.2009 is the driver version at the website.
You have : ??Go to device manager and find the card right click it and select properties.
Thanks for your cooperation.

 

[kaspa]

Yes I have the motherboard you linked thank you. I went through and updated the drivers as said. The only problem I had was RAID did not auto install. I don't have anything in RAID mode though (Only one HD/GPU) and don't see it in the device manager. I do not have the wireless card that I know of.

Some more info:
Two Monitors
PS2 Keyboard plugged in atm
USB Mouse
Audio is plugged in. (Bought another card because I thought the onboard could be the issue)

I cannot do the full windows update as it BSOD.

Installed on Computer ATM (remember fresh install)
TS3
Eve Online
Firefox
Speedfan

One thing that might matter, don't know if it does or not is two audios are installed. I have the onboard disabled atm. I was getting BSOD before I had put the other card in. (Just recently picked it up).

What I (not you I know you are way more knowledgeable than me lol) believe is ruled out is GPU (still bluescreens with the spare I bought) and RAM passed MEMTEST. I have a 750watt PSU so don't think thats it?

I have not messed with any bios settings.

 

[kaspa]

Forgot to add, I am just doing the system updates (not the security ones) atm to see if I can get those updates on Windows Update.

 

[Skylais]

So after attempting to install updates you get a BSOD? does windows updates have any time to say some sort of error code? Go to windows updates and click view update history. Take note of the ones that failed and what error code they give, also if you can unplug as much as you can.
Run any of these stress tests you have not already done, if you do not mind.
Stresstests:
Ram : http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
General hardware: http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html ( (Three pre-set configurations are available: Small FFTs and In-place FFTs, and Blend. Small and In-place modes primarily test the FPU and the caches of the CPU, whereas the Blend mode tests everything, including the memory.)
Graphics: http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html (Do the above Graphics test only with the latest drivers, and then Run it until the temperatures stop increasing; should be less then 10 minutes. If you don't see any crazy glitches or distortion on the screen, The test most likely passed. Take note if the Temperature gets too high, or you see Visual artifact - Wikipedia, the free encyclopedia to stop the test.)

 

[kaspa]

The updates BSOD while they are downloading or installing. I checked the notes and it was due to file missing/corrupt. Everything is unplugged except monitors/keyboard/mouse.

RAM did memtest on old ram, it went smooth and 0 errors. Just went and bought some new RAM just in case to help speed things up and still BSOD on Prime95. Every test ended in a BSOD after 1minute or less.

Furmark - Went smooth no errors or BSOD.

 

[kaspa]

So thinking bad CPU or MOBO?