BSOD about 5-10 minutes in "Page fault In nonpaged area"

[Charlock]

So I bought a brand new computer, everything is new. Clean Windows 7 64bit installation and all, but recently I started getting this Bluescreen, from what I would say out of nowhere as my computer ran just fine for a month. I have tried to remove memory sticks, Harddrives, CD-ROM. I also bought a brand new harddrive for a different problem (Which I solved) a week ago, so all hardware is only 1 month old.

I ran CHKDSK, found no problems, checked memory timings (Somewhat, I'm not really a brainiac when it comes to doing tests and looking at numbers) and ran a memory test which found no problems with my current memory stick.

My bluescreens occurr kinda random, 5-15 minutes apart, so I can start the computer just fine, everything works like it should but then all of a sudden BSOD with the messege "Page_fault_in_nonpaged_area". Never seen that one before and I've tried a lot, just now I uninstalled daemon tools, but when i started up again it BSOD 5 mins in.

Now on the other hand, I've managed to keep the computer running for maybe 30 minutes without any problem.

Here's a link of a screenshot I took on my Bluescreen Viewer report.

http://i46.tinypic.com/s2bd6d.jpg

Thanks in advance.

 

[yowanvista]

Please follow the BSOD posting instructions & attach the relevant .zip file.
http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

 

[Charlock]

Yeah sorry I saw that one now, kinda jumped the gun.

Doing it now though.

 

[Charlock]

There we go.

Forgot to add that when I boot in Safe mode I don't BSOD.

 

[yowanvista]

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA (Memory Related)

Usual causes: Defective hardware, Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS.

Stop any overclocking if any.
Run SFC /SCANNOW Command - System File Checker

It'll be advisable to run Memtest for at least 7 Passes.
You may want to reset your BIOS before running the test, ensure that RAM settings are left on their default/Auto values.

Enable Driver Verifier, it'll help us to identify any faulty drivers.
Driver Verifier - Enable and Disable
Note: Your computer may not be functional in Normal Mode if faulting drivers are detected during this phase, you may need to use Safemode with Networking.