BSOD and pc freezing while gaming

[inviziBlet]

So i have new mid range pc, and from the first day i can't use it normaly. when i start playing, after few minutes my pc freeze for few minutes or does not respond at all until power off, or does BSOD. The only thing that works sometimes is if i disable all gpu features and play on minimum settings, but still from time to time it just stops working,( ive noticed that if FPS goes up above 100 it crashes almoust instantly). I've done Dump Files - Configure Windows to Create on BSOD and i still can't locate minidump files after BSOD. (also with this new pc ive noticed that my screen have running lines)
My PC - ASUS M5A78L - M LX3
AMD FX6300 six core 3.50 GHz
NVIDIA geforce GTX 750 Ti
2x 4 GB ram
580w power suply


Sorry for my english and if i missed something

 

[axe0]

Hi inviziBlet,

Welcome to the 7forums.

Please remove Gigabyte software, it is known for causing BSOD's.

Please make a photo of the BSOD or note the stop code with the driver mentioned (a driver has the extension '.sys')

 

[inviziBlet]

stop code

• (first BSOD) ; STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8008C5A060, 0xFFFFFA8008C5A340, 0xFFFFF80003192F80)
• (second BSOD) ; STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8007F9DB10, 0xFFFFFA8007F9DDF0, 0x FFFFF800031C9F80)

and by saying to remove gygabyte soft, do u mean gygabyte oc guru, or something else?

 

[axe0]

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk http://www.sevenforums.com/tutorials/433-disk-check.html

 

[inviziBlet]

Diagnostics Test

 HDD TEST

:ar: Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

   Note

Do not run SeaTools on an SSD as the results will be invalid.

:ar: Run chkdsk http://www.sevenforums.com/tutorials/433-disk-check.html

SeaTools all tests pass, chkdsk no problems found

 

[axe0]

Please check C:\Windows\ for a kernel dump file called memory.dmp, it there is a file right click it > copy to > zip and upload the zip file. If the zip file is too large, please use a 3rd party uploader like dropbox, onedrive, google drive etc. for uploading.
Have you checked C:\Windows\Minidump\ after the new BSOD?

 

[inviziBlet]

i cant find any of these files...

 

[axe0]

When you have read the instructions for configuring the dump files, have you also checked for the pagefile?
Please check your services for the Windows Error Reporting Service and make sure it is set to manual
Press windows logo + r and type services.msc to get access the services.
In case the Windows Error Reporting Service is NOT manual,

• right click the service
• choose properties
• change the startup type to manual
• click apply > ok

 

[inviziBlet]

its all set... and by saying to remove gygabyte soft, do u mean gygabyte oc guru, or something else?

 

[axe0]

Yes, I mean oc guru

Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
How to fill in your system specs:

 

[inviziBlet]

system spec updated

 

[axe0]

Diagnostics Test

 System File Check

Please try following:

• Open an admin command prompt
• Copy/paste "sfc/scannow" (without quotes) and press enter
• When it finished reboot your system
• Open again an admin command prompt
• Enter sfc/scannow again

If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

 

[inviziBlet]

windows resource protection did not find any integrity violation

 

[axe0]

Diagnostics Test

 Malware scan

Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller, ESET Online Scanner and SuperAntiSpyware

   Note

*(Uncheck trial version in the installation process)

 

[inviziBlet]

all scanns good

 

[axe0]

Diagnostics Test

 Clean boot

Please try the following:

• Open taskmanager
  • Go to the tab startup
  • disable everything
• Search msconfig and open it
  • Go to the tab services
  • Check 'hide microsoft services'
  • Uncheck all other services
  • Click apply and click ok
• Reboot if asked

See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.
If the problem still persist, please test the memory using MemTest86+

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

 

[Jtsully2013]

I think I have a fair guess as to what the problem is. Your motherboard is listed on this site (https://www.asus.com/us/Motherboards/M5A78LM_LX3/specifications/) to have a maximum power limit of 95 watts to the cpu. The FX-6300 needs exactly 95 watts. I have a very similar motherboard with the exact same power limits as the one you listed as a component of your system, and I have been experiencing crashes quite often in games. It can supply enough power for everyday tasks or low-intensity games like minecraft, but it is hard pressed to work well for later titles. My best recommendation is to either get a new motherboard or go into the bios, find the CPU jumper configuration(usually under advanced), turn everything to auto and disable AMD Turbocore. If that doesn't work, you could try looking into adjusting the Load-Line Calibration under the same settings, but I do not recommend it. Do your research on LLC! It counter-acts power deficiency in the cpu, but can increase temperatures and very quickly kill the processor if you are not careful. I personally would not go over 50%, but you should leave it on auto if you do not want to risk it. It is extremely frustrating, and I have yet to find a permanent solution that workd over extended periods of time and does not involve replacing the motherboard, but there could be another answer. Best of luck, and I hope this helps!