Solved BSOD DRIVER_POWER_STATE_FAILURE when going to sleep mode

[kelf]

Hello, I would appreciate any advising in solving this BSOD recently whenever I go into sleep mode. Attached is the DM collector zip file, thanks in advance!


On Tue 10/7/2014 9:52:07 PM GMT your computer crashed
crash dump file: C:\windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x4, 0x258, 0xFFFFFA8006CFC040, 0xFFFFF80000B9C3D0)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 10/7/2014 5:11:04 AM GMT your computer crashed
crash dump file: C:\windows\Minidump\100714-52681-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75B80)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8007712060, 0xFFFFF800049FE3D8, 0xFFFFFA8013E2ECB0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000009F, {4, 258, fffffa8006cfc040, fffff80000b9c3d0}

*** WARNING: Unable to verify timestamp for appliand.sys
*** ERROR: Module load completed but symbols could not be loaded for appliand.sys
Implicit thread is now fffffa80`06cfc040
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : tcpip.sys

Followup: MachineOwner
---------

0: kd> !irp fffff80000b9c3d0
IRP signature does not match, probably not an IRP.  Use any flag to force.
0: kd> lmvm appliand
start             end                 module name
fffff880`103f2000 fffff880`103fd000   appliand T (no symbols)           
    Loaded symbol image file: appliand.sys
    Image path: \SystemRoot\system32\DRIVERS\appliand.sys
    Image name: appliand.sys
    Timestamp:        [B][COLOR="Red"]Fri May 20 20:20:42 2011[/COLOR][/B] (4DD6407A)
    CheckSum:         0000BFFE
    ImageSize:        0000B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Replace the outdated Appliand driver from this site:
Downloads

 

[kelf]

Thank you Golden, will report back if issue is resolved!