Solved BSOD error 0x0000000a

[Holfs]

As the title says i have a BSOD problem couple of minutes after starting up my pc crashes.I appreciate your help.I've attached the files.

 

[x BlueRobot]

Welcome to the forums,

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:

• http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

   Information

Additional Help - http://www.sevenforums.com/crash-lo...-driver-verifier-identify-issues-drivers.html

 

[x BlueRobot]

Update:

[COLOR=Red]BugCheck 4E[/COLOR], {[COLOR=Blue]7[/COLOR], 12e0ce, 1, 0}

Probably caused by : HIDCLASS.SYS ( HIDCLASS!HidpDistributeInterruptReport+130 )

Usual causes:  Device driver, memory

It appears that a device driver has corrupted the PFN list, by mishandling MDLs, by unlocking physical pages more often than locking the physical pages, therefore causing the reference count to drop below zero.

Although, this doesn't appear within the call stack, it's seems to what has happened, according to the parameters provided by the dump file.

 

[Holfs]

I use a microsoft wireless keyboard and mouse, could that driver be the cause ?

 

[x BlueRobot]

No it's very unlikely, run Driver Verifier please.

 

[Holfs]

I'm running it.As soon as i rebooted, running Driver Verifier,i got another bsod.

 

[x BlueRobot]

Could you please upload the dump file?

http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

 

[Holfs]

Here it is.Haven't crashed since this one.

 

[x BlueRobot]

Driver Verifier didn't seem to be enabled for that BSOD:

2: kd> [COLOR=SeaGreen]!verifier[/COLOR]

Verify Level 0 ... enabled options are:

Summary of All Verifier Statistics

RaiseIrqls                             0x0
AcquireSpinLocks                       0x0
Synch Executions                       0x0
Trims                                  0x0

Pool Allocations Attempted             0x0
Pool Allocations Succeeded             0x0
Pool Allocations Succeeded SpecialPool 0x0
Pool Allocations With NO TAG           0x0
Pool Allocations Failed                0x0
Resource Allocations Failed Deliberately   0x0

Current paged pool allocations         0x0 for 00000000 bytes
Peak paged pool allocations            0x0 for 00000000 bytes
Current nonpaged pool allocations      0x0 for 00000000 bytes
Peak nonpaged pool allocations         0x0 for 00000000 bytes

 

[Holfs]

It seems it wasn't on.I tried running it again, also in safe mode but whenever i try my pc gets a bsod right after booting up.

 

[Holfs]

It's on right now, haven't had a crash yet.I'll keep it running like you said.

 

[Holfs]

Crashed again.Here's the dump file

 

[x BlueRobot]

[COLOR="Red"]BugCheck 1A[/COLOR], {[COLOR="Blue"]41287[/COLOR], [COLOR="SeaGreen"]30[/COLOR], 0, 0}

Probably caused by : CI.dll ( CI!memcmp+93 )

Usual causes:  Device driver, memory, kernel

It seems that a illegal page fault has occurred, which leads to a more of a device driver related cause. There is also some Windows modules which are sharing the same memory address for some reason.

2: kd> [COLOR="SeaGreen"].trap fffff880`03189e90[/COLOR]
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
[COLOR="Red"]rax=0000000000000000[/COLOR] rbx=0000000000000000 rcx=0000000000000002
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000ddba1c5 rsp=fffff8800318a020 rbp=fffff8800318a080
 r8=fffff8000dc60000  r9=0000000000000001 r10=0000058000000000
r11=0000000fffffffff r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po nc
nt!MiResolvePageFileFault+0x1115:
fffff800`0ddba1c5 8b4830          mov     ecx,dword ptr [[COLOR="Red"]rax+30h[/COLOR]] ds:00000000`00000030=????????

Scan for any missing, modified or corrupted protected Windows files with:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

 

[Holfs]

I'll do that.I also put my ram in to another ram slot and i haven't had a crash yet, it seems to have fixed my problem but i'm not sure.

 

[Holfs]

Well i tried scanning but the command didn't work, i tried using the system update readiness tool like it says but that also didn't work, i can't do a system restore either

 

[x BlueRobot]

What error message does it give you, if any?

 

[Holfs]

It says Windows Resource Protection Could Not Start the Repair Service, i did as it's suggested and set Windows Modules Installer to manuel, still the same.

 

[x BlueRobot]

Are you able to run the command at boot? You will need a Windows installation DVD or a System Repair disc.

http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

 

[Holfs]

I tried it, got the same error.

 

[x BlueRobot]

Try reading through this TechNet thread - SFC problem - "Windows Resource Protection could not start the repair service"