BSOD erros, x124 or xF4

[shadysosa99]

Hello everyone, First time posting here.



I built this PC around 6 years ago. It used to Bsod a lot and then stopped so I didn't worry about it. But now it has been recently bsoding a lot. At first it was an x124 error so this time I dove into figuring out how to trouble shoot. I have tried so many things: Memtest86, chkdsk, memory test, seagate. All those tests seem to come up fine which inclines me to believe its due to overheating but my temps seem fine. Plz help lol (Let me know if you need pictures of each blue screen)

 

[Snick]

shadysosa99

Welcome to Sevenforums!
Lots of pertinent sleuthing by you!
What happens in safe mode?
axe0 is one of our BSOD experts.
Wait a bit to see if axe0 responds.
You could Private Message (PM) axe0 if you wish.
Said that PM notification is working, from here is not.

Snick

 

[torchwood]

Hi
There appear to be multiple problems with your install.

intel/usb3/radeon/razer drivers/Ccleaner and windows updates


it would be easier and quicker to do either a repair install, might not repair everything, my instincts tell me a clean install would be your best option.

Roy

 

[Snick]

Agree with you torchwood!

I'd try repair install first & try to save reinstalling programs, files, etc.

The below has a link to Win7 ISO zip and Win7 in extracted folder zip
Repair Install, correct windows problems without reformatting.docx

If you're going to Reformat and install, Burn to DVD IngBurn, Burn to USB Rufus.
How to Burn an ISO Image File to a DVD with ImgBurn ...
How to MAKE a BOOTABLE Windows 7/10 USB using RUFUS ...

Snick

 

[axe0]

shadysosa99

Welcome to Sevenforums!
Lots of pertinent sleuthing by you!
What happens in safe mode?
axe0 is one of our BSOD experts.
Wait a bit to see if axe0 responds.
You could Private Message (PM) axe0 if you wish.
Said that PM notification is working, from here is not.

Snick

I don't monitor the forums like I used to and may check the forums a few times a week.

 

[axe0]

Hi shadysosa99,

Sorry for the wait. I'm busy during the week and only have a few hours in total each day to manage personal life.

Are you still in need of help?

 

[shadysosa99]

Hello it has been a long time since my last post. I ran a system repair install which caused some issues at first, but once I updated all my drivers, things seemed squared away. Not until recently, December2020 and January2021 did my computer start crashing. This time it was only 0x124 errors. Recently, like today, It has crashed multiple times within a small time frame. I can't say for certain, but it seemed like it crashes when I'm playing games or watching Twitch TV online. I don't know if that helps but thought I might mention it. What steps should I take?

 

[Laith]

Hello it has been a long time since my last post. I ran a system repair install which caused some issues at first, but once I updated all my drivers, things seemed squared away. Not until recently, December2020 and January2021 did my computer start crashing. This time it was only 0x124 errors. Recently, like today, It has crashed multiple times within a small time frame. I can't say for certain, but it seemed like it crashes when I'm playing games or watching Twitch TV online. I don't know if that helps but thought I might mention it. What steps should I take?

Hi.

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa800e13e138
Section       @ fffffa800e13e2c0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock

fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
Error         : DCACHEL0_WR_ERR (Proc 2 Bank 1)
  Status      : 0xbf80000000000124
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
  Address     : 0x0000000441954d00
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
  Misc.       : 0x0000000000000086

Everything seems to point to a CPU error. The 0x124 bugcheck in itself is associated with hardware failure and everything else seems to indicate that this hardware failure is CPU-related. Try running Prime95 and make sure you run it with Small FFTs, as it says in the article so you can stress the cache. If it freezes or BSODs, you'll have your culprit. Make sure to monitor your temperatures in the meantime so you get an idea of how hot your CPU becomes during load.

 

[shadysosa99]

Hi.

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa800e13e138
Section       @ fffffa800e13e2c0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock

fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
Error         : DCACHEL0_WR_ERR (Proc 2 Bank 1)
  Status      : 0xbf80000000000124
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
  Address     : 0x0000000441954d00
fffff800035e20e8: Unable to get Flags value from nt!KdVersionBlock
  Misc.       : 0x0000000000000086

Everything seems to point to a CPU error. The 0x124 bugcheck in itself is associated with hardware failure and everything else seems to indicate that this hardware failure is CPU-related. Try running Prime95 and make sure you run it with Small FFTs, as it says in the article so you can stress the cache. If it freezes or BSODs, you'll have your culprit. Make sure to monitor your temperatures in the meantime so you get an idea of how hot your CPU becomes during load.

HI, thanks for the help. I tried running that program but my pc got extremely hot and I am never able to finish the test. Does that mean its an overheating issue? If it is a CPU issue how would I go about fixing it? by getting a new cpu?

 

[axe0]

A few tips to address overheating with the cpu that can go a long way
- if the heatsink or fan is dusty, use a compressed air spray to remove the dust
- reapply thermal paste, improperly applied thermal paste can have a negative effect on the temperature
- upgrade the fan to a better performing one (not preferable and last option)

Apply these tips in the order they're posted and check if they have any effect before continuing with the next tip. If the effect is sufficient no need to apply the other tips.