digigon247
New member
- Local time
- 9:46 AM
- Messages
- 9
Window 7 home premium 64bit, random Blue screen at time and even idling. :S
My Computer
- OS
- window 7 home premium 64bit
BIOS Version/Date INSYDE V1.16, [COLOR="Blue"]8/9/2010[/COLOR]
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffffb5801eba8bb, 0, fffff80003ed0d7f, 7}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+425 )
Followup: MachineOwner
---------
4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffb5801eba8bb, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003ed0d7f, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000007, (reserved)
Debugging Details:
------------------
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80004116100
fffffb5801eba8bb
FAULTING_IP:
nt!MiAgeWorkingSet+425
fffff800`03ed0d7f 410fb65e1b movzx ebx,byte ptr [r14+1Bh]
MM_INTERNAL_CODE: 7
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: SSUService.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff880037e77c0 -- (.trap 0xfffff880037e77c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffff680003b8148
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80003ed0d7f rsp=fffff880037e7950 rbp=00000000003b814e
r8=0000000000000001 r9=fffffa8007169ec8 r10=0000000000000005
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!MiAgeWorkingSet+0x425:
fffff800`03ed0d7f 410fb65e1b movzx ebx,byte ptr [r14+1Bh] ds:0007:00000000`0000001b=??
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80003e8de97 to fffff80003ee71c0
STACK_TEXT:
fffff880`037e7658 fffff800`03e8de97 : 00000000`00000050 fffffb58`01eba8bb 00000000`00000000 fffff880`037e77c0 : nt!KeBugCheckEx
fffff880`037e7660 fffff800`03ee52ee : 00000000`00000000 fffffb58`01eba8bb 00000000`00000000 92704800`a3e2e005 : nt! ?? ::FNODOBFM::`string'+0x43cd1
fffff880`037e77c0 fffff800`03ed0d7f : 00000003`00000000 92600000`6dc2d867 00000000`00000000 00000000`00000126 : nt!KiPageFault+0x16e
fffff880`037e7950 fffff800`03f5f4b5 : fffffa80`07169ec8 fffff880`00000001 00000000`00000001 fffff880`037e7bb0 : nt!MiAgeWorkingSet+0x425
fffff880`037e7b00 fffff800`03ed10d6 : 00000000`000007e5 00000000`00000000 fffffa80`00000000 00000000`00000003 : nt! ?? ::FNODOBFM::`string'+0x4cd46
fffff880`037e7b80 fffff800`03ed158b : 00000000`00000008 fffff880`037e7c10 00000000`00000001 fffffa80`00000000 : nt!MmWorkingSetManager+0x6e
fffff880`037e7bd0 fffff800`0417de6a : fffffa80`03cef850 00000000`00000080 fffffa80`03cd1040 00000000`00000001 : nt!KeBalanceSetManager+0x1c3
fffff880`037e7d40 fffff800`03ed7ec6 : fffff880`009b1180 fffffa80`03cef850 fffff880`009bc0c0 efdfffff`ffffffff : nt!PspSystemThreadStartup+0x5a
fffff880`037e7d80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiAgeWorkingSet+425
fffff800`03ed0d7f 410fb65e1b movzx ebx,byte ptr [r14+1Bh]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nt!MiAgeWorkingSet+425
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+425
BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+425
Followup: MachineOwner
---------
Welcome
There is only one dump of 8-20-2012.
Did you get any BSoDs after that?
Seeing the one dump I would suggest you to uninstall ESET and use MSE (At least to test)
→ Microsoft Security Essentials - Free Antivirus for Windows
Run Disk Check on your hard disk for file system errors and bad sectors on it
→ http://www.sevenforums.com/tutorials/433-disk-check.html
Also look for an update on your BIOS version:
Code:BIOS Version/Date INSYDE V1.16, [COLOR="Blue"]8/9/2010[/COLOR]
Observe if your system is stable.
If not, Take memtest. Run for 8 passes.
→ http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 50, {fffffb5801eba8bb, 0, fffff80003ed0d7f, 7} Could not read faulting driver name Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+425 ) Followup: MachineOwner --------- 4: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* PAGE_FAULT_IN_NONPAGED_AREA (50) Invalid system memory was referenced. This cannot be protected by try-except, it must be protected by a Probe. Typically the address is just plain bad or it is pointing at freed memory. Arguments: Arg1: fffffb5801eba8bb, memory referenced. Arg2: 0000000000000000, value 0 = read operation, 1 = write operation. Arg3: fffff80003ed0d7f, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000007, (reserved) Debugging Details: ------------------ Could not read faulting driver name READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80004116100 fffffb5801eba8bb FAULTING_IP: nt!MiAgeWorkingSet+425 fffff800`03ed0d7f 410fb65e1b movzx ebx,byte ptr [r14+1Bh] MM_INTERNAL_CODE: 7 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x50 PROCESS_NAME: SSUService.exe CURRENT_IRQL: 0 TRAP_FRAME: fffff880037e77c0 -- (.trap 0xfffff880037e77c0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000058000000000 rbx=0000000000000000 rcx=fffff680003b8148 rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000 rip=fffff80003ed0d7f rsp=fffff880037e7950 rbp=00000000003b814e r8=0000000000000001 r9=fffffa8007169ec8 r10=0000000000000005 r11=0000000000000000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!MiAgeWorkingSet+0x425: fffff800`03ed0d7f 410fb65e1b movzx ebx,byte ptr [r14+1Bh] ds:0007:00000000`0000001b=?? Resetting default scope LAST_CONTROL_TRANSFER: from fffff80003e8de97 to fffff80003ee71c0 STACK_TEXT: fffff880`037e7658 fffff800`03e8de97 : 00000000`00000050 fffffb58`01eba8bb 00000000`00000000 fffff880`037e77c0 : nt!KeBugCheckEx fffff880`037e7660 fffff800`03ee52ee : 00000000`00000000 fffffb58`01eba8bb 00000000`00000000 92704800`a3e2e005 : nt! ?? ::FNODOBFM::`string'+0x43cd1 fffff880`037e77c0 fffff800`03ed0d7f : 00000003`00000000 92600000`6dc2d867 00000000`00000000 00000000`00000126 : nt!KiPageFault+0x16e fffff880`037e7950 fffff800`03f5f4b5 : fffffa80`07169ec8 fffff880`00000001 00000000`00000001 fffff880`037e7bb0 : nt!MiAgeWorkingSet+0x425 fffff880`037e7b00 fffff800`03ed10d6 : 00000000`000007e5 00000000`00000000 fffffa80`00000000 00000000`00000003 : nt! ?? ::FNODOBFM::`string'+0x4cd46 fffff880`037e7b80 fffff800`03ed158b : 00000000`00000008 fffff880`037e7c10 00000000`00000001 fffffa80`00000000 : nt!MmWorkingSetManager+0x6e fffff880`037e7bd0 fffff800`0417de6a : fffffa80`03cef850 00000000`00000080 fffffa80`03cd1040 00000000`00000001 : nt!KeBalanceSetManager+0x1c3 fffff880`037e7d40 fffff800`03ed7ec6 : fffff880`009b1180 fffffa80`03cef850 fffff880`009bc0c0 efdfffff`ffffffff : nt!PspSystemThreadStartup+0x5a fffff880`037e7d80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16 STACK_COMMAND: kb FOLLOWUP_IP: nt!MiAgeWorkingSet+425 fffff800`03ed0d7f 410fb65e1b movzx ebx,byte ptr [r14+1Bh] SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: nt!MiAgeWorkingSet+425 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3 IMAGE_NAME: memory_corruption FAILURE_BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+425 BUCKET_ID: X64_0x50_nt!MiAgeWorkingSet+425 Followup: MachineOwner ---------
Let us know the results
Click on Scan for and attempt recovery for bad sectors, deselect automatically fix file system errors
What were the results from memtest? If it's pending, start now and report back results
3 passes only.
Well okay, observer your computer and let us know if there are more BSoDs
Make a hard drive test from the hard drive manufacturers website
Hard drive test both short and long with
→ SeaTools for Windows
You may also go through these
→ Hard Drive Diagnostic Procedure
Did you take the long generic of seatools?
OK, enable driver verifier
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html
Upload the dumps you got with verifier enabled.
BIOS Version/Date INSYDE V1.19, 12/6/2005
There is no dump
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html
and your BIOS version is now of 2005?
how come?
Code:BIOS Version/Date INSYDE V1.19, 12/6/2005