BSOD in sleep mode about 30% of the time

[tonygotskilz]

While technically it isn't a BSOD cause the computer is off, it constantly does not come out of sleep mode, then upon doing a hard restart (power button on from sleep). I get the normal boot or safemode screen and when I boot normally I get the message you have recovered from a crash ... bla.. I have attached my dumps using the method outlined. Anyone got any clue what the culprit is?

Running windows 7 home X64
16 GB corsair mem
2 256 SSDs
i5-2270K
gigabyte MB

 

[koolkat77]

Welcome to the forum,

The BSOD's seem to be caused by your MotioninJoy simulate Xbox 360 controller (virtual Xinput device)

Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Mon Sep  9 04:19:23.850 2013 (UTC + 6:00)
System Uptime: 0 days 23:56:26.098
BugCheck D1, {fffff88006b5a638, 2, 8, fffff88006b5a638}
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Sun Sep  8 03:15:07.684 2013 (UTC + 6:00)
System Uptime: 0 days 14:29:24.933
BugCheck D1, {fffff8800681b638, 2, 8, fffff8800681b638}
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Fri Sep  6 15:08:34.519 2013 (UTC + 6:00)
System Uptime: 0 days 7:06:30.768
BugCheck D1, {fffff8800541b638, 2, 8, fffff8800541b638}
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Thu Sep  5 11:38:38.205 2013 (UTC + 6:00)
System Uptime: 3 days 9:30:02.583
BugCheck D1, {fffff88008b9a638, 2, 8, fffff88008b9a638}
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
Debug session time: Sun Sep  1 16:39:40.089 2013 (UTC + 6:00)
System Uptime: 0 days 1:50:11.338
BugCheck D1, {fffff8800575f638, 2, 8, fffff8800575f638}
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
BUGCHECK_STR:  0xD1
PROCESS_NAME: NOT FOUND
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

Please update its driver to the latest version available: MijXfilt.sys Sat May 12 10:27:12 2012 (4FADE6A0)
Driver Reference Table - MijXfilt.sys
To perform a clean install of a driver, follow this tutorial:

• How to Clean Left Over Driver Files with Driver Sweeper

------------------------
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:

• Click on the rb:
• Type CMD on Search
• Left click and Run as Administrator
• Type SFC /scannow - read here

Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

 

[tonygotskilz]

I did everything on the list but I have yet to find the driver for a newer version of Motionjoy yet. I deleted motion joy and added it again using the newest version on the site. I seem to be on the latest version now with the newest driver. I haven't noticed a shutdown while sleeping yet since. I was going to upload my logs but they are 8 megs a piece and the forums upload widget keeps crashing trying to upload them.

 

[koolkat77]

I'd recommend uninstalling the latest driver, it's problematic.