Bsod non-frequently (most common due to ntoskrnl.exe)

[jonasv]

hi,

i recently builded a new computer,
placed windows 8 on it, but constantly recieved errors..

so after that i installed windows 7 pro 64bit

i updated al my drivers ( i think)
i used several programs to check memory (memtest86+ etc)

and it still freezes (randomly, so not with a specific prog) or i get a bsod
(most common bsod is irsl not less or equal, i used to get a lot more but now almost all are like this one)

any help is welcome

(i attached sf zip)

 

[Arc]

Hello jonasv.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

 

[jonasv]

sorry for late respons, couldn't get behind this pc

i did it again.. now with 5.dmp in the zip

 

[Arc]

fffff800`00b9ca28  fffff880`0612fc0bUnable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
[COLOR=Red]*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
 Rt64win7+0x5c0b[/COLOR]

It is Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC. And it is kinda old.

lmvm rt64win7
start             end                 module name
fffff880`0612a000 fffff880`0619f000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
 [COLOR=Red]   Image name: Rt64win7.sys
    Timestamp:        Thu Apr 21 23:45:33 2011[/COLOR] (4DB07445)
    CheckSum:         00076017
    ImageSize:        00075000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update it from Realtek.

Lots of USB related issues there. For the port, first, uninstall and reinstall the USB ports drivers.

1. Right click on Computer icon > manage. It will open the computer management window.
2. Click on "Device Manager" in the left pane, it will list all installed devices up.
3. Expand "USB Serial Bus Controllers" by clicking on the triangle in front of it.
4. Click on one item to select, then right click and uninstall.
5. Do the same for all.
6. Restart the computer.
7. At restart, windows will auto configure the appropriate drivers.

And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

For the devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

► Scan the system for possible virus infection.

• Anti-rootkit utility TDSSKiller
• Windows Defender Offline

► Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.


► Stress test the CPU.
Hardware - Stress Test With Prime95




** If you are using any USB dongle/ USB wifi .... let us know about it in detail. ..... State all the USB devices you use.